How to turn on OPPO mobile phones with high power consumption

It is recommended that you try to follow the following methods in daily use: 1. The mobile phone consumes fast power after playing games for a long time, watching, turning on wifi, gps positioning, Bluetooth and other functions, resulting in faster power consumption, it is recommended to turn off wifi, GPS positioning, Bluetooth and other functions as much as possible when not using the mobile phone; 2. After using the software that does not come with the mobile phone, it begins to heat up and consume power quickly, there are generally software compatibility problems, please uninstall and observe when encountering such problems, if you can't determine which software causes it, it is recommended to restore the factory settings after backing up the mobile phone data (settings - system "more" - restore factory settings, please do not check "completely clear"); 3. Perform root cracking permissions on the mobile phone or flash into the non-OPPO mobile phone system firmware package, cracking the phone's own system behavior, resulting in fast power consumption, it is recommended to reflash the system; 4. If the battery is used for a long time and the battery activity is reduced, it is recommended to go to the customer service center to test and replace the battery. In addition, in low temperature environments, the battery capacity will be reduced, which will reflect the phenomenon of fast power consumption.

If the problem still exists after the above operations under normal ambient temperature, please bring the purchase invoice, warranty card and mobile phone to the OPPO customer service center for testing, and professional engineers will solve it for you.

OPPO phone drains battery too fast? Just turn on this switch and flush the power several times.

1. The reason why the OPPO mobile phone consumes power quickly.

1. The screen is always bright, and the brightness is too high;

3. Running too much software;

5. Poor contact between battery, SIM card and memory card.

Second, the solution.

1. Enable power-saving mode;

2. Turn off the screen manually as soon as possible when not in use;

3. Reduce the brightness of the screen and shorten the backlight duration;

4. Turn off the network when the signal is weak;

5. Do not install unauthenticated programs at will, close unused applications, and prevent stealing power and traffic;

6. Upgrade the operating system in time;

7. Turn off account syncing;

8. Regularly clean and treat the metal contacts between the mobile phone, card and battery to ensure that the contacts are clean, not oxidized, not loose, and have good contact;

9. If the above methods cannot be solved, go to the after-sales service center and update the operating system.

You can try the following methods to deal with it: 1. Too many background programs are running, resulting in fast battery consumption, it is recommended to clean up the background slag bridge applications that are not used temporarily, so as to reduce the power consumption of background applications; 2. The use of live wallpapers and themes will cause the screen to consume more power, it is recommended to turn off the live wallpapers and themes, and use the wallpapers and themes that come with the system, so as to reduce the power consumption of the screen; 3. Turn on the screen-off clock, which causes the screen to be always on, and accelerates the power consumption of the mobile phone, it is recommended that you set the screen-off clock to a reasonable period of time or turn off the screen-off clock, so as to reduce the power consumption of the screen; 4. The automatic screen off time is set to be long, and the screen is in the bright state, which will consume a certain amount of power, so it is recommended to turn off the screen of the mobile phone or set a reasonable automatic screen off time when the mobile phone is not in use; 5. In the weak environment of mobile phone network, the intensity of the transmitted signal will be increased, resulting in fast power consumption of the mobile phone, it is recommended that you use the mobile phone in a place with a good signal; 6. WiFi, GPS, and Bluetooth search the network in the background, resulting in fast power consumption of the mobile phone, it is recommended to turn off WiFi, GPS positioning, NFC, Bluetooth and other functions as much as possible when not using the mobile phone; This reduces the power consumption of the bright screen.

If the problem persists after trying the above methods, it is recommended that you bring the purchase invoice, warranty card and mobile phone to the OPPO customer service center for testing, and a professional engineer will solve it for you.

This applies to all OPPO models.

Hello, if the mobile phone consumes power quickly, first of all, it is recommended that the owner of the poor building check it, is it too much in the background? Because there is a lot of software running in the background, it will occupy a lot of memory resources of the mobile phone, including the hardware of the mobile phone. Therefore, if there is too much software running in the background, the mobile phone must consume power very quickly, and it is recommended that the owner of the empty smile check whether there is any extra background.

It is recommended not to turn off all the backgrounds and clear the redundant background, so that you should be able to save some power. In addition to closing redundant programs. It is recommended that the landlord can also turn on the phone's power-saving mode, including reducing the screen brightness of the phone.

Turn off Bluetooth, GPS switches and the like if you don't use them anymore, and the screen refresh rate of your phone. There is no need to drive too high, generally 120 Hz is enough. It is recommended that the landlord can also enter the settings of the mobile phone, find the option of the battery, check the daily use of the battery, take a look at the ranking of the highest power consumption, and then focus on turning off some corresponding switches or software according to the ranking.

If the landlord himself has no problem setting up, and all the programs that consume power are turned off. However, if the mobile phone still consumes power very quickly, in this case, it cannot be ruled out that it may be caused by the hardware problem of the mobile phone. Also, if the battery is not durable, it may also cause the power to drain very quickly.

But if the landlord uses a mobile phone, in the use of some very hardware resources of the program or itself is playing some large-scale games, in this case the mobile phone power consumption is very normal, because the running of these large-scale software and applications, itself is very much hardware performance, so in this case the mobile phone power consumption is also very normal, and in this case, generally speaking, the heat of the mobile phone is also relatively large, in this case, the mobile phone consumption is also very normal, In general, no special attention is required.

The intelligent power-saving function of the ColorOS system can intelligently determine the user scenario, and you can also use different power-saving strategies to save electricity.

One-click power saving. The system will automatically detect the battery consumption problem of the mobile phone, and you can use the one-click power saving function to quickly process and optimize the battery life with one click.

Set Path: Set > Battery > One-key power saver > One-key extension

Details of battery consumption. Go to Battery Consumption Details: You can view the battery consumption details of the app today, yesterday, and the day before yesterday, and learn about the foreground activity time, background activity time, and calculated power consumption of the app.

View the path: Go to Settings > Battery > Battery Consumption Details

Intelligent power-saving scenarios.

In the smart power-saving scenario, you can intelligently determine your sleep period, and keep your phone in a low-power state during sleep, reducing power consumption.

Set the path: Open Settings > Battery, and click Smart Power Saving Scenario Shenzhou to turn on the Sleep Standby Optimization switch.

Note: After this function is enabled, the mobile phone will be in a low-power operation state, which may cause the application message notification to be untimely, it is recommended to choose it according to the actual situation.

High-performance mode.

When the phone is turned on for high-performance mode, the system will always run at a high level, but it will consume additional power and may cause heat.

Set the path: Go to Settings > Battery and turn on the High Performance Mode switch.

You can click the power saving mode in the battery mode settings, turn it off in the settings of the power saving mode, set the power level, and automatically turn on the power saving mode.

Note: This applies to all OPPO models.