CS Internet Speed Problem!! 30, CS Internet speed problem!!

It must be that the OP's server is not good enough, resulting in congestion to connect to the server, and the more people, the higher the ping. Generally speaking, it is better to choose a server address: 27015 (Shanghai), so you should pay more attention to the FPS value when playing, that is, the server response time.

The ping value is not actually higher the better, nor is it the lower the better, as long as the fight is smooth, generally speaking, the best ping value is, it doesn't matter if it is left or right. That's only if you're not a graphics card problem.,Go to the next genuine version.,Don't use what dirctx uninstall at will.,That software is used n times.,Every time it's uninstalled.,When you reinstall it.,Play CS with a mouse to control the viewing angle.,It's always a card.,N times to reinstall the system (absolutely true)So try to ** There are some of the SP2,360 security guard vulnerabilities that come with it.。

A group of dumb melons,Haven't asked about people's information and draw conclusions,First find out which service provider is living in the building.,Let's talk about it.,If it's together,Ensure that you can't brush a good server.,If it's telecommunications,It's very likely to be a problem with ** lines.,If it's Netcom,It's estimated that you don't use Netcom lines to set up servers in Xinjiang.,Because of Netcom's line,It's completely over when you go out of the province.,It's still a good point for telecommunications.,Don't use it together.,That's 200k s just traffic.,Not even if it's speed.。 That is to say, sometimes I go to the **** thing abroad, and I can also get a very high speed, but it is not good to play real-time games, that is, because of this reason, only the traffic is large, and the speed of instant transmission is not enough, and Netcom connects to Telecom, and the real-time speed of Telecom Connection Netcom is enough, but the two companies limit the overall traffic between each other. This is like the problem of the length of the road, if the road is wide enough, then it depends on the length, the length here refers to the size of the instant speed, if the road is too narrow, no matter how short the road is it is difficult to walk.

Your ping is not only related to your network speed, mainly the network situation of the op, if his CPU or ADSL is not good, no matter how good you are, it is useless, I don't believe you try to change the OP, see how, in fact, like you are so good network speed should build your own OP, no need to be on someone else's, and if you are in the north, try to use Netcom, the south uses telecommunications, if you have money, fiber optics, don't use anything else, some network companies out of may not be in line with the local transmission speed!

The network environment can be changed in the settings of the DCOO version.

Change it to 768 to make the network speed better. It's a little bit better, indeed.

As for the slow internet speed, you can check the details of the network connection and check the server IP.

Then close all the programs that occupy the network,Enter cmd ping to this IP,If the number of pings" is 60, then it's useless to change the program. Fundamentally, your network latency is high.

Are you fighting against Haofang? Or what's next, connect to game software or something?

Your network speed is 2m **There are also 200kb s, which means that there is no problem with your network speed, the reason should be out of the server you enter If it is Haofang You enter the time room and there will be a number of display delay The larger the number, the more the delay will be more and more stuck It is best to enter the local server Less delay will not be stuck!

If it's a connection software, then you also have to look at the latency Whether it goes to the northerners' Netcom servers, maybe.

It's definitely not your unilateral reason here.,Your pin can't get off is actually the network around you and your home network can't be connected.,So there will be a high pin phenomenon.。 The f card of your Netcom will be stuck in Telecom, and the opposite is the same.

For example, if you are in the Netcom, in the Telecom, in the Telecom, in the Education Network, it will affect more or less if you are in Beijing.

It should be good to enter the server in Beijing! If your LAN isn't that high, that's the reason.

There is a problem with the server chosen!

It may be that the setting of CS is wrong or the version cannot keep up, it is recommended that you try the next CS again.

You're not fighting the Americans, right?

Try another one, will it be an accident.

Upload an accelerator to the net.

Do you live in the south to play the northern server?

The units behind your 10 and 100 are m, right?

This situation occurs because the network card of the notebook is 10m 100m adaptive, and the desktop network card is 10m, so that the working mode of the specific connected network card will be displayed after plugging in the network cable.

But for the bandwidth you use normally when surfing the Internet, 10M has far exceeded what you use, that is to say, the 10M and 100M you see are just the working mode of the network card, which will not affect your normal Internet speed. In fact, the uplink and downlink bandwidth you use when surfing the Internet can reach 1M, which is ideal.

So, you don't have to make the desktop a 100M display unless you change the NIC.

In addition, you can log in to the incoming route to see if the MAC address is bound, if the port rate limit is set in the route, this may cause network restrictions.

If you don't understand the above, ask me again. I wish you every success.

The network card with the laptop has a large bandwidth.

Your network cable is throttled by the administrator.

There is a method of high internet speed, which can release about 20% of the system's reserved bandwidth.

Select"Get started"menu, click"Log out"Enter the main screen of login, press Ctrl+Alt+del twice in the main screen of login to appear in the login window, enter administrator in the user name (note: to distinguish size), fill in the password field with your own password (if you don't set a password, you can be blank) press OK to enter Windows, click"Start running"Enter to"Group Policy"window, choose from the window on the left"Computer Configuration, Management Templates, Networking, QoS Packet Scheduler"and double-click in the window on the right"Limit the bandwidth that can be reserved"Select"Enabled"And will"Bandwidth throttling (%)"Set to 0 and click"Applications", and then"OK"and restart it.

See if yours is set too high

The phenomenon you said my customers have also asked me, in fact, the 10 100 you said is the working mode of all network cards now, and the lowest network card now supports 10m 100m adaptive mode. The local connection you mentioned above also prompts that the icon that is restricted or unable to connect is a yellow exclamation mark, this is just that the network card has not obtained the IP address of the external network or the internal network normally, this does not affect the external network (if your machine is an internal network, you will not be able to access the network), this can be changed at the bottom of the local connection attribute (the notify me when this connection is restricted or no connection option is not checked). Now the normal home Internet is nothing more than 1m 2m 4m 6m, like the most common network card can cope with the current network speed, your above beware of the Internet speed problem is invalid.