After installing the system, it cannot be connected to the network, and the message modem deleted

To resolve the issue, do the following:

1) Reset the modem. For more information, consult the hardware documentation.

2) If you are using an external modem, make sure that you are using a suitable serial cable and that the cable connection is reliable. You may want to try replacing the modem cable. Similarly, if you are using an adapter to connect an external modem to a serial port, make sure that the adapter is properly wired for modem communication.

For example, a 9- to 25-pin adapter for a mouse does not work correctly on a serial network connection.

3) Test the serial port or multi-port adapter and replace it if necessary.

4) Make sure your modem's handshake option is configured correctly. Consult the hardware documentation for information on the different handshake options available for your modem.

5) If Network & Dial-up Connections doesn't support your modem, switch to a supported modem.

6) Verify that other applications (e.g., "HyperTerminal") are not using the communication port. If you are using this port, then initiating Network and Dial-up Connections can cause the message to appear.

Re-drive the NIC.

If it cannot be driven, it is driven after reinstalling the system after changing the system disk.

The modl driver is wrong. Reinstalling the drive will do the trick.

The solution provided by Crane Lake Technology: Select [My Computer] - right mouse button, select [Device Manager], find the network adapter, find the deleted one (usually a green x will be displayed), and click Enable.

A modem is a kind of computer hardware, which can translate the computer's digital signals into analog signals that can be transmitted along ordinary lines, and these analog signals can be received by another modem at the other end of the line and translated into a language that the computer can understand. This simple process completes the communication between the two computers. Check whether there is any problem with the connection between the modem contactor and the computer, if the connection is normal, it may be that the netware service has been uninstalled, so there is a prompt that the demodulator has been deleted, resulting in the inability to dial up the Internet.

At this point, find the client, reinstall it, and create a new connection, and it can be restored.

Where to find <> client

It's too difficult, it's too difficult to get on the net, thank you.

You're welcome, I hope this service is helpful to you, and I wish you a happy life.

The modem is the legendary "cat", that is to say, it is hardware, do you delete the "broadband connection", if it is to build another one, it is OK!!

Generally, laptops or desktop computers are external modems, so when the computer cannot dial up the Internet, the modem has been deleted, first of all, you need to check whether the computer and the cat are connected normally, and then check other situations.

If you uninstall the NetWare service, you will also get a message that the demodulator has been deleted, and you will not be able to dial up the Internet. Find the point next to the uninstall installation on it, select the client service, and look at the point on it. Okay, just right-click on the modem deleted connection, right-click to delete, create a new connection, and you can restore it.

If you encounter the problem that the modem has been deleted, resulting in the inability to dial up the Internet, please first check whether the cat is connected to the computer, whether the communication is normal, and then check the related items mentioned above, in addition, if the network card driver is not installed well or there is a problem will also cause such problems, it is recommended that you uninstall the original driver, and reinstall the driver can generally restore the settings, which can generally be solved.

Open the Control Panel. A lot of this is done in the control panel.

Check to see if blue has been installed

Soleil driven. First of all, make sure that you have blue installed on your computer

Soleil driven. If you haven't installed this, you can install other drivers that provide modems.

Installed Bluetooth modem usage. Take a look at our Bluetooth in our online neighbors

pannetwork

Adapter modem is properly turned on. If it works and still can't dial normally, it's a problem with the modem, starting from step 4 below is to install the modem.

Open ** and modem options. Observe the modems that have been installed and see if they can be used again. Let's go back and use these modems and try to see if we can dial up or connect to a computer using a PC suite.

Click the [Add] button in the screenshot above. If the above debugging still doesn't solve our situation, start adding a new modem to use. The following box will appear:

Install a new modem. When we do the above, a box will appear to install a new modem, here we can select the modems we want to use, provided that we have installed these modems before.

Select the port of the modem. Choose those ports that are not used to make this Bluetooth

dunmodem

The port of the modem, if you want to use this port (COM5 is used here), you can write down which one you have installed, and see if this port is used when dialing up to connect to the Internet, and keep using and installing it all the time, otherwise it will report errors such as hardware failure.

Complete installing the modem. Click on the screenshot above The next step is to wait for the system to install automatically, and the following prompt box will pop up after installation, which means that we have successfully installed.

Check whether the installation is successful in ** and modem options. When you're done, you can go to ** and modem options. See if the modem of the installed COM5 port is working properly.

Click Properties to view the running status. The modem with port COM5 has been successfully installed and the operating status is checked.

Congratulations, it's working fine. The modem installation has been successfully completed, and other types of modems are installed on a similar principle, so try it out slowly.

Note: To use the port consistently, make sure that the computer is equipped with a driver that provides the modem.

There's a ** version here.