CAD Proportional Scale command, CAD scale command

This is possible, you can create the object into a block, then specify the xy scale when inserting the block, and then break the object apart.

The command is "sc":Tools Raw materials: HP Battle 66, windows10, autocad20061, input shortcut commands.

On the command line, enter the scaling shortcut command sc, and press the keyboard enter key or spacebar to start the scaling command.

2. Select the element.

Move the mouse over the sheet to select the entity you want to zoom on, and press the Enter key or the Space bar to proceed to the next step.

3. Set the datum point.

Move the mouse to specify a datum point, press enter or the spacebar to proceed to the next step.

4. Enter the reduction ratio.

Enter the scale reduction factor on the command line, and press the Enter key or the Space bar to reduce the selected element.

PrecautionsAfter you select the zoom object, specify the zoom base point as prompted (the base point is the zoom center point, and the selected object will zoom in or out as the cursor moves). After specifying the base point, the system will prompt you to specify the scale factor, at this time, you can enter the scale factor according to the actual needs or use the cursor to select the relative CAD scale. If the CAD scaling factor is greater than 1, the object will be enlarged; A scale factor between 0 and 1 shrinks the object.

The shortcut key for CAD scaling is SC, which can be scaled proportionally or referenced to scaling. There is also a command that can also be scaled, which is aligned to al, which is a form of reference scaling.

CAD on a computer. Enter the sc command in the command window and click Enter on the keyboard. Select the component you want to scale, press the spacebar to confirm, and left-click a vertex of the rectangle as the base point.

Finally, enter the scale factor, enter a positive number less than 1 to reduce it, and if you enter a positive number greater than 1, it is to zoom in.

Enter sc (full name of the command) on the command line of the method of proportional scaling in CAD, select the block object, specify the left end of the line in the block as the base point (you can also select other points, here for the convenience of selecting this point), type r (reference option) when the scale factor is required, and take the two endpoints of the line in the block to get the reference length.

Open Mega Computer-Aided Design, and the following illustration shows the graphics in Computer-Aided Design. The size of the painting is comparatively smaller. By scrolling the middle scroll wheel of the mouse, you can zoom in and view the graph.

If you want to multiply the actual size of the shape, drag the shape first to select it all.

The methods of CAD scaling are family fibers: use the Scale command; Use the Zoom In command; Use the Stretch command; Use the Copy Zoom command to use the Copy Zoom command.

Here's how scaling works in CAD:

Preparation tools Materials: Windows 10, OMEN 8 Pro, ZWCAD software.

1. Open the computer auxiliary manuscript to disturb the round aid design, and the following figure shows the graphics in the computer auxiliary key collapse design. The size of the painting is comparatively smaller.

2. By scrolling the middle scroll wheel of the mouse, you can zoom in and view the graph.

3. If you want to multiply the actual size of the shape, please drag the ** shape first to select all of them.

4. Then in the command input box below, type SC and press Enter.

5. In the specified scale factor input box at the back of the graph, enter the number of times you want to zoom in, and enter any number of times as needed.

6. In this way, the size of the graph will be enlarged according to the input multiple and the proportional column of the whole graph. The original size of the boundary line in the image below is 8, and after five inputs, the value will be approximately equal to 40.

The operation method of CAD equal scale is as follows:Computer: Lenovog460

System: Windows 11

Software: CAD

1. Open the CAD software.

2. Click on the top to zoom.

3. Select the scale object, and click the Enter key after selection.

4. Then enter the specified scale factor deficit book, this number should be greater than 0, and the figure is entered. Pin shed macro.

5. Then click the Enter key to get the scaled graphics with the stool.