What is the reason for the overcurrent protection of the spiral water cooled air conditioner?

Overcurrent is a common fault of the air conditioner, if it trips, you first look at the power of the press, detect the starting current of the press, measure the normal current of the air opening connected to the air conditioner, first eliminate the problem of air opening, if the starting current is large, detect the suction and exhaust pressure of the press, and reasonably control the refrigeration dose.

There may be many reasons for overcurrent, such as system blockage and over-dirty external heat sinks, which cause the most overcurrent faults, and the aging of compressor windings.

If the spiral water-cooled air conditioner is too stayed, then his protection is caused by his own air conditioner automatically getting on a safe vehicle.

Some are water-cooled air conditioners for protection from exposure, what is the reason? This should be caused by overheating or cooling.

Now the spiral, its water cooling, its air conditioning including its flow protection, we still need to adjust the reason, or can cooperate.

The main thing is to protect the coil from overload problems.

The reason why spiral water-cooled refrigerators are protected by flow is because it circulates heat dissipation.

What is the cause of spiral water-cooled air conditioner explosion overcurrent protection? I think it's probably just flowing too high, so it's probably going to be protected now.

What is the cause of the overcurrent protection of the water-cooled air conditioner? It should be the heating system of the air conditioner.

Spiral water-cooled, water-cooled air conditioner reports overcurrent. What is the reason for this protection, you can consult the staff of the air conditioner.

There are several causes of overcurrent:

1. The refrigeration area of the room is too large, so that the air conditioner cannot be shut down.

2. The outdoor unit of the air conditioner is placed in a very hot place.

3. Too much refrigerant is added in the machine, which makes the condensation pressure rise and the load is too heavy.

4. The fan speed of the outdoor unit is too slow, and the heat dissipation is poor.

5. The fluid valve and air valve of the new air conditioner have not been opened.

You first look at the power of the press, detect the starting current of the press, measure the normal current of the air opening connected to the air conditioner, first eliminate the problem of air opening, if the starting current is large, detect the suction and exhaust pressure of the press, and reasonably control the refrigeration dose.