Computer audio problems are urgent!! win7 system

You select Recording Device on the right side of the volume icon in the taskbar - Recording --- Listen - remove the listening check, and you won't be able to hear the sound of walking! As for your headphones and speakers, they both have game sounds and **** device listening to song sounds. This is because your sound card is not driven correctly, it may be that the sound card is old-fashioned, you can use the driver wizard to re-drive the sound card!

Find the right driver for your computer!

Before using the microphone, many people like to remove the "mute" option from the "Microphone" column in the volume control panel and turn the microphone volume to the maximum. In fact, this approach is wrong, the "mute" option of "microphone" does not control the sound of the microphone, but controls whether the speaker and headphones feedback the sound of the microphone. Therefore, it is recommended that when you use the microphone, select the "Mute" option!

This eliminates noise and echoes in the headphones for better speech.

Method Step 1: The detailed setup steps are as follows:

1) Double-click the "Horn" icon in the lower right corner of the Windows desktop with your mouse to open the "Volume Control" window.

2) Click on the main menu item "Options" (upper left corner) and select "Properties" to open the "Properties" dialog box.

3) Select a mixer from the "Mixer" drop-down list. Most computers have only one mixer, and some have two: one for setting up recordings; One for the setup**.

For cases where there is only one mixer, there are generally two valid radio buttons in the radio button under "Adjust Volume": ** and Record; In the case of two mixers, only one of the radio buttons under "Adjust Volume" is active, ** or recording. 2** Settings:

2) Tick all the boxes under "Show the following volume controls".

3) Click OK to open the Volume Control window.

4) Except for the selection boxes under "Volume Control" and "Waveform", all other selection boxes are ticked (muted).

Click on the main menu item "Options" (upper left corner) and select "Properties" to open the "Properties" dialog box.

1) Select the radio button "Record" under "Adjust Volume".

2) Tick all the boxes under "Show the following volume controls".

3) Click OK to open the Recording Control window.

4) Except for the checkbox under "Microphone", all other checkboxes are not checked.

5) Adjust the slider in the slider of the microphone to adjust the recording volume (usually maximum). 4 Microphone Advanced Properties Settings for Computer Headsets:

a.If there is no "Advanced" button under the microphone settings, then tap "Options" -- Advanced (if it is active).

b.Click the "Advanced" button to open the "Advanced Microphone Controls" dialog box.

c.If your microphone has a low recording volume, it is recommended to check "micboost" in front of it.

d.If the recording of your computer's headset microphone is noisy, it is recommended to leave it unchecked before "micboost".

1. Check whether the sound card, cable, speaker and other devices are connected normally.2 Reinstall the driver of this device to solve the problem;

4. No sound and no speaker, open the control panel, add and remove programs, add and delete windows components, check the number before renting "Accessories and Tools", click "Next", and then, shut down and restart, the system prompts to install new hardware, and install according to the prompts;

5. Uninstall the sound card driver and reinstall or upgrade it.

6. When the first card driver of the sound cheat is installed, the prompt "AC chip cannot be found" appears, it may be that the computer is poisoned, or the sound card driver is deleted in violation of the operation, and the internal software conflicts. The solution is to reinstall the system and drivers.

7. After shutting down, wait for a period of time to restart the device"

See if you have the wrong holes!

This is not a driver problem, it is an audio glitch.

Suggestion: 1 Poor contact - test your audio jack with the light green of the host until the sound is normal (it does not have to be plugged in rigidly); Otherwise, the audio equipment is malfunctioning

2 If it is a new computer that you have just bought, find a merchant for after-sales warranty;

3 If it is a computer equipped by yourself, you need to find a merchant to replace the motherboard (the audio is on the motherboard) 4 Also, if you change the audio, there are also cases of audio failure;

5 If it is a speaker that comes with the notebook, you need to replace it with a new one.

Workaround:

1.Reinstall the sound driver.

2.Pay attention to whether the socket connecting the speaker to the computer is faulty.

3.Send the speaker to the manufacturer to check if there is any fault.