-
Is there any open detectable ah, dear.
-
This one is simple.
Law. 1. In "Settings" > "Bluetooth", first try to switch on and off the switch, turn on and off Bluetooth several times, maybe the problem will be solved.
Law. Second, again, in "Settings" > "Bluetooth", delete the device that is in question, and then add it again after the day.
Law. 3. Solve the problem that other Bluetooth devices cannot be searched when compared with other non-"ios6"version of the device, first turn off Bluetooth on iPhone 5 ("Settings" > "Bluetooth" > "Off"). Then once the request signal from the other device is sent out, turn on the Bluetooth of your iphone5s.
Law. Fourth, Bluetooth compatibility issues ensure that the device you are trying to connect to is compatible with Bluetooth. As mentioned earlier, in the iPhone 5 Apple introduced the use of new standards, resulting in many devices only working Bluetooth, with the iPhone 5S not functioning properly.
If that's the case, you'll have to buy a new device (e.g. a Bluetooth device for a car lift, or a new receiver for a new one).
-
Since Bluetooth devices generally come with their own miniature batteries, and will have an automatic power management program, when it is not used for a certain period of time, it will enter a sleep state or automatically shut down to save power consumption. If you see this prompt on your iPhone, check that the Bluetooth device you want to connect to is turned on.
If you're sure your Bluetooth device is turned on, try turning off the Bluetooth switch on your iPhone. Because sometimes the Bluetooth of the system will also be chaotic, resulting in the inability to connect to the Bluetooth device normally. In the settings, open the Bluetooth interface, turn it off and on again, and then try to connect the Bluetooth device.
If that doesn't work, we can also try turning the Bluetooth device off and on next. In this way, temporary failures of the Bluetooth device itself can be resolved. The general Bluetooth device may have only one button, usually long press to turn off, and then long press to turn on.
If not, refer to the manual of your Bluetooth device.
If that doesn't work, turn your iPhone off and on again. Press and hold the power button at the top of your iPhone, and when the power off slider comes out, slide the slider to power off. After turning it back on, try to connect the Bluetooth device again to see if it can be successfully connected.
If you have tried the above four methods and still don't work, it is recommended to use another mobile phone to connect the Bluetooth device. If other devices can't connect to the Bluetooth device, it's likely that the Bluetooth device is malfunctioning. If there is a functional failure of the Bluetooth device, the only way to solve the problem is to find the Bluetooth manufacturer.
-
Only Apple devices can be connected, and Bluetooth must be turned on on both parties.
-
That's how Apple doesn't work with other phones.
-
First of all, you have to know that Apple can only connect to Apple Bluetooth, if it is Android, it can't be connected, it can only be connected to iOS devices.
-
I also have this problem, I want to ask if this problem is solved?
-
I go, I too....I also want to buy a better Bluetooth headset, but now I can only buy a wired one.
-
1. In "Settings" > "Bluetooth", first try to toggle the ON OFF switch. Turning on and off Bluetooth a few times may solve the problem.
2. Again, in "Settings" > "Bluetooth", delete the device that is in question and then add it again.
When with other non-"ios6"version of the device, first turn off Bluetooth on iPhone 5 ("Settings" > "Bluetooth" > "Off"). Then once the request signal from the other device is sent, turn on the Bluetooth of your iphone5.
4. Bluetooth compatibility issues.
Make sure that the device you are trying to connect to is Bluetooth compatible. As mentioned earlier, in the iPhone 5 Apple introduced a new standard that caused many devices to only work Bluetooth, and the iPhone 5 did not work properly. If this is the case, you can only buy a new device (such as a Bluetooth device in your car, or buy a new receiver).
-
Apple Bluetooth is not able to transmit things, only to play games and headphones unless you jailbreak.
So if you want to send something to other phones or something, he can't find it.
-
Power off your iPhone5 phone and restart it once.
-
1. Bluetooth can also be turned on here in the mobile phone control center.
2. Then go to the phone settings and tap to enter Bluetooth.
4. Use another mobile phone to connect to match the Bluetooth of the Apple phone.
5. Match successfully, click to connect.
-
Dear,Apple's mobile phone Bluetooth can't pass things to each other.,You can only play games in a connected way.。
-
Apple uses AirDrop to transmit, which is equivalent to Bluetooth, but requires devices above iPhone5, above the system.
-
Apple's Bluetooth is a decoration, basically there is none, you can listen to songs.
-
Apple's Bluetooth can't be used to connect with each other to transmit things, yo, it can only be connected to Bluetooth devices.
-
Check the Bluetooth headphones.
1First of all, please check the indicator light of the Bluetooth headset to see if it is flashing. If you don't use the Bluetooth headset for a long time, the Bluetooth headset will be in standby mode and disconnected from the iphone5s in order to save power. If this is the case, press the on/off button of the Bluetooth headset to activate the headset and connect it to your iPhone5S.
3 Another situation is that the Bluetooth headset does not have enough power, resulting in automatic shutdown. At this time, please use the charger to charge the Bluetooth headset, and then turn on the device to connect with the iPhone5S.
Re-pair your phone with the Bluetooth headset.
1If you can turn on normally after charging, but you still can't connect with your iPhone5S, please open the Settings app on your iPhone, as shown in the figure.
6Next, please refer to the operating instructions of your Bluetooth headset to let the headset enter the pairing state, and let the iPhone and Bluetooth headset pair again. Under normal circumstances, press and hold the on/off button of the Bluetooth earset for more than 5 seconds, and see the indicator flash, indicating that it has entered the pairing state.
-
Then you restart your phone and Bluetooth.
-
It's normal that the bluetooth of the iphone should not be able to search the surrounding Apple devices, I used to want to connect with my classmates, so two iPhones, an iPad, and three machines want to do Bluetooth connection, but unfortunately, we can't search each other.
But you can borrow a machine of other brands, you will find that the iPhone is very easy to search, but it can't be connected, simply put, iPhone, iPad, iPod Bluetooth does not have a transmission function, so there is basically no possibility of connecting with mobile devices. (Except for dedicated Bluetooth headsets).
So, it's not that you use it, it's that the machine is originally set up like this.
-
The operation method may be wrong when Bluetooth pairing.
Look at the small white dot assistivetouch
Settings >> General >> Accessibility AssistiveTouch" to turn on the small white dot. The Home button logo of the iPhone 5S is not the same as the iPhone 5, but if the fingerprint unlock of the iPhone 5S is broken, it will also become the same as the iPhone 5. In fact, you can't see it after this jailbreak installs the plugin. >>>More
iPhone 6 on the basis of iPhone 5S screen size, LED backlight, body thickness, screen resolution, screen material have been improved, so if iPhone 5S we just bought whether to change to iPhone 6, the following detailed comparative analysis, with a rational purchase. >>>More
Want to know the authenticity of your Apple machine? >>>More
In the latest iOS system, the description file has been canceled, and the software permissions have been entered in Settings-General-Device Management. >>>More
Hello, you are now using the iTunes version of the mobile phone manager, because the harassment interception and other functions need to control the underlying system, so you need to get permission after jailbreaking to achieve it, and because these cannot be launched in the AppStore, so the iTunes version of the manager does not have system-level functions such as interception. If your iPhone is jailbroken, it is recommended that you search for "Tencent" on Cydia and find Tencent Phone Manager Pro to install it.