Can the PSP remove the battery and play?

You can remove the battery and play directly with the charger! If you haven't tried it, don't talk nonsense.

It is also possible to put the battery on, and the charger will not be charging after the battery is fully charged. Its impact on the battery can be ignored.

No way! Playing while charging will affect the life of the battery and the machine! Some things will turn bricks! So don't charge to play PSP

No, it doesn't. Don't plug the battery into the power supply and it will automatically shut down after less than a few seconds.

It's okay, the PSP charging and power supply lines are not the same. There is no impact.

Some people say that it will reduce the power, but it is not that the battery has been used for a long time at all. Lithium batteries are meant to have a number of times. Generally at 1000 times you rush to play fine.

Of course, you can't take it out, it's just that playing while charging affects the capacity of the battery, and you won't be able to save the power in the future!

PSP has three output pins, in addition to the positive and negative poles (left and right), that is, a signal pin (middle), PSP during work or charging, its signal pin has been communicating with the host (everyone in the boot state to check [battery information], see [battery remaining time] will change, is the result of communication).If the battery signal foot cannot receive an effective signal (including all kinds of abnormal charging, discharging and storage) during charging and discharging, the CPU inside the battery will activate the protection circuit to lock the battery and cannot continue to output it externally, which is"Lock up"Causes. After the locked raw electricity is loaded into the machine, there is no reaction when the power button is pushed.

Many people have always thought that Sony's involvement in the game industry was accidental,[1] and in fact, Sony has long coveted this fat. [1] In 1988, Ken Kutaragi of Sony's Home Appliance Department proposed a plan to develop a portable game console [1], and the console named "Game Man" was similar to the Game Boy in terms of design [1] , with a vertical design and the same low-power black and white liquid crystal, [1] Ken Kutaragi once considered using cutting-edge infrared technology for communication battles, [1] but due to the first Game Boy to sweep the market,[1] this console was put into the Imperial Slow Cold Palace.

The day after the PSP was officially announced, Nintendo's ** plummeted, and many people were convinced that Sony would devour Nintendo's last territory. [2] Nintendo remained unusually calm, with high-level figures such as Satoshi Iwata and Shigeru Miyamoto claiming on various occasions that they were secretly developing a "heterogeneous main filial piety machine" that subverted the idea. 2] The following year's E3 show, Sony and Nintendo's respective portable game consoles were exhibited at the same venue, and it was discovered that the biggest selling point of Nintendo's console, known as NDS, was the dual screen and touch screen.

At 15:30 p.m. on September 21, 2004, SCE's PlayStation Business Briefing 2004 grand future strategy presentation scheduled for the Palace Hotel in Tokyo [2] was postponed until 17 minutes later. [2]

According to the post-disclosure, SCE was originally going to announce the specific details of the PSP** and release date, but for some reason it was changed urgently. [2] Sony's original plans were completely disrupted by Nintendo's sniping, which announced the official release date and ** of the NDS an hour before the start of the SCE strategy conference. Nintendo's aggressive offensive forced SCE to adjust its strategic deployment, drastically reducing console pricing and bringing forward the release date to the end of the year and the beginning of the year.

The 1000 original current unlocking method is to completely discharge.

2000 & 3000 Raw Power Unlocking Method:

1. Leave it alone, put it externally for an afternoon, let it discharge by itself 2. Disassemble a simple lighter to take out the electrical appliances, and hit the positive and negative poles of the battery once or twice 3. Find copper wires and small bulbs or small motors, and add PSP batteries to make a small circuit discharge.

Also: an overview of how PSP batteries work.

PSP battery adopts Li-ion battery, which is developed from lithium battery.

Lithium-ion batteries generally have a management chip and a charging control chip, in which there are a series of registers in the management chip: storage capacity, temperature, ID, charging state, discharge times and other values, these values will gradually change in use. The charging control chip mainly controls the charging process of the battery.

The power statistics chip can sample and calculate the power of the battery by recording the discharge curve (voltage, current, time).

Why is it "locked up" - the battery is locked?

PSP has three output pins: in addition to the positive and negative poles, it is a signal pin (in the middle of the positive and negative poles). The PSP's signal pins are always in sync with the PSP during working or charging, which is why the PSP can check the battery level.

However, if the signal pin cannot receive effective signals (including various abnormal charging, discharging and storage) during charging and discharging, the CPU inside the battery will activate the protection circuit to lock the battery and cannot continue to output it externally. This is the reason for "locking the power", the locked original power is loaded into the machine and pushes the power button without any response, and it can be turned on after connecting the power supply.