Calculation of the brush area of metal structures

1. The amount of metal structure oil brushing is calculated by weight according to different paint types and the number of brushing times.

2. The brush oil area of the metal structure is 58m t.

3. Some projects use quotas, which only need to be calculated according to the quota.

4. If you can't figure it out yourself, or don't have time to calculate, it is recommended to find a substitute for calculation, depending on the situation, the cost varies.

1. Other methods.

Little ant counting.

Able to do quantity calculation, budget, high quality and efficiency.

2. You can search for budget cost units on the Internet, and some units do better.

3. You can go to a third-party platform to entrust others to do it, pay attention to anti-fraud on the platform, you can find a unit, or you can find a person to do it.

Second, pay attention.

1. The calculation of the engineering quantity shall be calculated in accordance with the quota or prescribed standard of the project location;

2. Familiar with the quota and regulations for the calculation of engineering quantities is the basis;

3. It is the premise to see the drawings clearly before calculating the engineering quantity, and small notes should be paid attention to, so as not to miss the mistake and make an error in the calculation result;

4. In principle, errors are not allowed in the calculation of engineering quantities, and I hope that the engineering quantity will not be calculated with a fluke attitude.

3. Calculation method of steel structure engineering quantity (reference).

1. The engineering quantity of the steel structure is calculated according to the weight of the components (beams, columns, purlins, tie bars, etc.).

2. If it is section steel, it is calculated according to the theoretical weight of the design size of the component, and if it is a steel plate, the area is calculated according to the maximum size of the outer frame, and the theoretical weight of the steel plate is calculated.

3. For the connecting plate and the reinforcing plate, the quota is set together with the attached components (attached to the beam is incorporated into the beam, and attached to the column is merged into the column).

4. For the bolts in the steel structure, if they belong to permanent bolts (that is, bolts connected by bolts), they should be calculated separately according to the specifications, and only the main material can be calculated.

5. For the bolts used for installation (bolts for temporary fixation during production) do not need to be calculated separately, because the component system stability has been considered.

There is a provision in the "Installation Project Budget Quota" that the oil area of the metal structure is calculated at 58m2 per ton, so you can implement it, and you don't need to find a place.

Note: The "Civil Engineering Budget Quota" is not calculated according to 58m2 per ton, but according to different steel structures, it is calculated according to 14-48m2 per ton.

Hello, I'm glad to answer for you, 1. The amount of metal structure oil brushing is calculated by weight according to different paint types and the number of brushing times. 2. The oil brush area of the metal structure is 58m, and some projects use quotas, which only need to be calculated according to the quota. 4. If you can't figure it out yourself, or don't have time to calculate, it is recommended to find a substitute for calculation.

1. Other methods 1, you can search for the amount of small ants, you can do engineering quantity calculation, budget, high quality, high efficiency 2, you can search for the budget cost unit on the Internet, some units do better 3, you can go to the third-party platform to entrust others to do socks, pay attention to anti-fraud on the platform, you can find a unit, you can also find someone to do. Hope it helps.