What are the tips for renovating home floors, and how to renovate old floors is the most trouble fre

1.After all the things in the room are moved out, the original floor is polished, and the original surface of the floor is polished off by 1-2mm, so as to ensure that the renovated floor is smooth and delicate;

2.After sanding, scrape the putty, and mix the sawdust of the floor into the putty, which can ensure that the original color of the floor is guaranteed, and the floor can also be protected from being scratched;

3.Generally speaking, the primer is brushed once and the topcoat twice. Where there are blemishes and micro-damage on the surface of the floor, you can apply the primer several times. Note that the primer should be painted with a special floor paint.

Almost every home in the city has a floor.

The floor is generally renovated.

Bridal chamber. The floor accompanies our lives, it can be used for a long time, most homes can use it for 5 to 10 years or even longer. Because the floor needs to be used for a long time, we will pay more attention to it, after a period of use, the floor will have a lot of problems, so we need to renovate it regularly, the renovation of the floor is a lot of expenses, here we will take a look at how to save more money on the renovation of the floor.

How to save money on floor renovation? Steps for floor renovation

Shovel old bricks. If the old floor tiles before.

The surface enamel has been damaged by wear and tear, or many places have been hollowed out and peeled off, or even have been seriously contaminated by stains, in these cases, simple repair is generally not effective, it is best to put the ground.

bricks are removed and replaced. However, there is a problem here that is more troublesome, because if only those damaged floor tiles are replaced.

If so, the difficulty is relatively large, because these floor tiles were laid many years ago, and it is difficult to find floor tiles of the same color, style and model after many years.

Directly pave new floor tiles.

With the development and innovation of science and technology, some things are becoming easier and simpler, just like there are already special ones on the market.

The walls and floor tiles are refurbished with new materials. Like tiles.

Surface treatment agents, tiles, mosaics.

Binders, these materials can be directly applied to the floor tiles, and then the new floor tiles can be laid on top, saving the time and effort of shoveling the old floor in the middle.

Keep the old floor tiles.

The floor tiles are basically not damaged, but there is a problem with the joints between the floor tiles, and in the face of this situation, it is only necessary to remove all the floor tile joints and redo them. Because in the process of long-term use, a large number of bacteria and dirt will breed in the floor tile joints, which must be removed, otherwise it will not only affect the beauty of the ground, but also endanger health.

Wooden floors are laid on top of old floor tiles.

If you don't want to continue to use floor tiles and want to lay wooden floors on the old ground, then you also need to clean the original floor tiles thoroughly, otherwise the floor tiles under will become a breeding ground for microorganisms and bacteria, which is very unfavorable to the future living environment and the health of your family.

There are many kinds of materials for the floor, the method of floor renovation of different materials is not the same, relatively speaking, the renovation of the wooden floor may be easier, because the cleaning of the old floor will not have too much trouble, but the ceramic is different, so we should usually pay more attention to maintenance, the maintenance of the wooden floor basically relies on essential oils, and the maintenance of the porcelain floor is mainly to avoid contact with water, as far as possible to keep the air dry, so as to reduce the possibility of some cracking, Even after renovation, you need to pay a lot of attention.

The easiest way to renovate old floors

1. Keep the old floor tiles.

If the color of the floor tiles at home is not particularly complicated, there are the same models on the market, if you want to save costs, you can shovel off the seriously worn and broken bricks, and keep the corners or furniture with no wear or less wear. However, the floor tile joints must be shoveled and redone, because it takes too long, the dirt is too heavy and too heavy, and the joints must be re-hooked, and it will be more beautiful after re-hooking.

2. Lay new bricks on top of old bricks.

If the original floor tiles are relatively thin and you feel that it is too troublesome to shovel them, you can try to directly lay the new floor tiles on top of the old floor tiles. Brush the surface of the old floor tiles with tile surface treatment agent, tile mosaic.

adhesive and then laying new floor tiles can save a lot of time and effort.

3. Recolor.

If you don't want to smash it, it is recommended to paint it on the floor tiles with coloring, so that the floor tiles can return to the previous luster and smoothness, but to remind you that when painting, you can not paint it into the seam, which affects the overall appearance.

4. Paste adhesive stickers.

This method is a new way to renovate floor tiles in recent years, and the operation of this method is very simple, and it is necessary to buy stickers on the floor tiles. At the same time, you can also choose a variety of styles, colors, and patterns, which can not only cover the unsightly part of the original floor tiles, but also choose another style and pattern for the floor at home.

5. Lay new tiles.

You can try to lay new tiles on top of the old ones, or you can pick up the original tiles and re-lay them. This part still needs to find a professional decorator to operate, because after all, they are more efficient and can be laid more beautifully.

There are the following methods for floor tile renovation:

1. Recolor.

After a long period of wind, sun and rain, the tiles are easy to fade and crack.

If you do not want to crush the heavy floor and resurface it at this time, it is recommended to color and beautify the tiles with a special enamel paint to restore the shine and smoothness of the tiles of the past.

2. Paste the adhesive sticker.

Whether it's online or in stores, they're going to ** this kind of floor sticker. Its operation is also relatively simple, just stick it on the tile, not only to cover the tile, but also to add a lot of life to the room thanks to its colorful patterns.

3. Lay new tiles.

If you don't want to get rid of the old tiles, you can also use some special decorative products to directly glue the new tiles to the old tiles such as adhesives.

Due to the low cost of floor renovation, many second-hand home owners plan to renovate all the old floors in their homes. However, it is only possible to renovate hardwood floors, parquet floors and bamboo floors with a surface thickness of up to 4 mm. As second-hand housing continues to heat up, second-hand housing decoration has become a hot spot, and decoration methods such as floor renovation and stone renovation have also become popular.

So what are the problems of renovation, how to do a good job of renovation, and what are the places that need everyone's attention? The following Tianjin Capital Decoration will be analyzed in detail for you.

Partial renovation is not good.

The overall renovation effect of the floor in a house is better, and the effect of the new floor can be basically achieved, but the partial renovation will cause the difference between the old and the new floor, and the longer the service life of the floor, the more obvious the difference between the old and the new.

Damaged, mildew, and deformed conditions do not necessarily make it possible to renovate. Floor mildew generally penetrates deep into the interior of the floor, and there will still be mildew spots on the surface of the floor after polishing; Deformation and damage to the floor cannot be remedied by sanding.

The renovation period will take 4 days.

Floor renovation is divided into five steps: sanding, scraping putty, coloring, painting, waxing and polishing. When sanding, the grinder should use 40 mesh, 80 mesh and 120 mesh sandpaper in turn (the larger the mesh, the smaller the sandpaper particles, the less obvious the scratches left by the sanding) three times, and then scrape putty to level the floor, and then paint or tone the floor. Since the texture of the surface layer of solid wood is natural, it is impossible to change the color of the décor, and only the depth of the color of the floor can be adjusted.

Tianjin Capital Decoration reminds you to move out of the house before renovation to ensure that the house is clean and dust-free when painting. Floors generally need to be primed once and topcoat twice. If there are still defects on the surface of the sanded floor, it is necessary to brush the primer several times according to the situation.

The first paint is completely dry before the next paint can be brushed. Therefore, it generally takes 4 days to renovate the floor. In terms of construction technology, the primer and topcoat are now mostly environmentally friendly UV light-curing paint, which does not contain harmful solvents, and consumers do not need to worry about the non-environmental protection of floor renovation.

The thickness of the surface layer should be up to 4 mm.

Floor renovation is to restore the old floor to new condition by sanding, scraping putty, painting, waxing and polishing the surface of the floor. Compared with buying a new floor, the old flooring adapts to the indoor environment and has better stability; The cost of renovation is also much cheaper.

There is a layer of aluminum oxide wear-resistant layer on the surface of the laminate floor, and the refurbished floor will destroy its wear-resistant layer, causing the floor to deteriorate, so the laminate floor cannot be renovated. Tianjin's first decoration reminds that only solid wood flooring, parquet flooring and bamboo flooring with a surface thickness of 4 mm can be renovated. Because the surface layer of the floor will be polished off 1-2 mm after several times of polishing, if the surface layer of the floor is too thin, the middle layer will be polished, affecting the service life of the floor, so it is necessary to ensure that the surface thickness of the floor is greater than 4 mm.

Renovating a floor requires five steps: grinding, sanding, painting, painting, and polishing wax. The grinding should be sanded three times with an order of 40, 80, 20 mesh sandpaper, then putty scraped on the floor, and then paint on the floor again. Since the surface of the planks is natural, only the color of the floor can be adjusted.

It is necessary to empty all the items in the house to decorate and ensure that the house is clean and tidy. The floor needs to be primed twice. If the floor is defective or needs to be polished, you need to apply more primer.

When the paint is dry, it's time to move on to the next step. So it takes four days to finish the floor decoration.

If the floor is renovated, it can improve the decoration effect of the room, but the decoration will lead to the difference between the old and the new, and the larger the size of the floor, the greater the color difference.

Moldy, deformed, and damaged floors cannot be renovated. Moldy flooring will corrode deep layers, and there will be mildew spots on the surface of the floor after polishing; If only a small part is damaged, moldy and deformed, the floor of the same color can be replaced. If the damage to the floor is extensive, you have to buy a new one.

Solid Wood Floor Renovation Steps:

1. Before the renovation of the old floor, ensure the cleanliness of the house and remove all the items in the house.

2. Polishe off the original surface of the floor by 1-2 mm.

3. Then scrape putty, color, paint, wax and polish. We should pay special attention to the step of painting, generally brush the primer once, twice the topcoat, and brush the primer several times when there are defects on the surface of the floor.

Notes on the renovation of solid wood flooring:

1. It should be noted that not all floors can be renovated, only solid wood floors, parquet floors and bamboo floors with a thickness of 4 mm or more on the surface of the floor can be renovated. The initial grinding will wear off 1-2 mm, too thin flooring is easy to polish out the middle layer, affecting the life of the floor, so before renovation, go to the seller to understand the surface thickness of your own floor.

2. If the color on the solid wood composite parquet block is not the soaked color but the surface coloring, or the colored wood bark layer is relatively thin, it will destroy the parquet effect after polishing, and it is recommended not to renovate.

3. If it is a laminate floor, it cannot be renovated, because there is a layer of aluminum oxide wear-resistant layer on the surface, and the renovation will destroy its wear-resistant layer and aggravate the aging of the floor.

4. If the floor has been damaged, mildewed or deformed, it is generally difficult to renovate and remedy the more serious situation.

5. In order to ensure the quality of floor renovation, please ask a more professional renovation company or cleaning company to be responsible for this project.

Generally, there are several steps in the renovation of sports wood flooring.

1. Use a trolley to remove the sports equipment on the wooden floor of the gymnasium.

2. Remove the string tape, logo and other attachments on the surface of the sports wood floor.

3. Use a professional refurbishment machine to polish and smooth, and the grinding thickness depends on the degree of wear and tear of the floor.

4. Use putty powder to smooth and fill the floor.

5. Wait until the putty powder is dry, and then use fine sandpaper to further polish the sports wood floor.

6. Mix putty powder and floor powder into putty with the same color as the floor.

7. Use a polishing machine to polish the sports wood floor, and use a vacuum cleaner to clean the floor.

8. Wait until the paint is dry before oiling and waxing the floor.

9. Paint, mark and draw logo for sports wood flooring according to customer requirements

Remove the old flooring and replace it with a new one.

1. On-site preparation.

Before the renovation of the wooden floor of the basketball court, it is necessary to clean up the wooden floor of the renovated basketball court. According to the situation of the construction site, remove the construction obstacles or stickers on the surface of the wooden floor.

2. Rough grinding.

First, use professional grinding tools to rough polish the wooden floor of the basketball court; After the rough grinding is completed, the belt grinder is used for medium and fine grinding; Use a corner grinder to do corner grinding on the corner area.

Wooden floors in the basketball hall.

3. Grinding and caulking.

After the wooden floor of the basketball court is sanded, some small gaps will appear. A mixture of putty and wood powder can be used for caulking.

4. Polishing. After the wooden floor of the basketball court is polished three times in coarse, medium and fine, the floor is polished again by using a polishing machine and sandnet abrasive.

5. Polishing the floor and cleaning.

After the grinding and polishing steps of the basketball court wooden floor are completed, the basketball court wooden floor is completely cleaned by using the vacuum cleaner Kaijie floor cleaning system.

6. Polishing and lacquering.

In addition to cleaning the wooden floor of the basketball court after polishing, you can use environmentally friendly water-based paint, paint the wooden floor panel of the basketball court, apply more than two sports primers, and ventilate and dry for 12 hours.

7. Underlining and logo

After the basketball court wood floor is polished and renovated, the next step is to mark the basketball court wood floor and draw the logo.