A series of questions about ME525 50

1. The camera that comes with the system is automatically saved after taking pictures; You can re** a software with what photo processing or the like, it has settings that can tell you whether to save it after each photo, I use other camera software.

2. It cleans the process that the system has not run for a long time and does not delete junk files.

3. Install the Android optimization master.

4. It's up to you, because I'm not using a 3G card, I usually go up and down the computer, and I copy it at the end.

5. You can go down, just operate step by step.

6. I didn't use Unicom's card, so I don't know.

Oh, I also plan to start this machine in the future, now using Symbian, Android is not very well understood, don't worry, I recommend a system software, mobile phone Kingsoft Guard, garbage cleaning I think it's okay,

Next**Ah, go to Sogou.

1. Router settings.

1) Use the settings page to log in to the wireless router and enter the corresponding password (the default is admin admin);

2) Open the "Wireless Parameters" item on the left, and set the corresponding SSID (i.e. the identification of the wireless network) in the basic settings, here it is set to MX401; Due to the use of MAC address filtering, you can not set the "account opening security settings" item, as shown in the following figure;

3) If you don't know the MAC address of DeY, you can connect to the wireless network directly without setting the MAC filter, and check the main MAC address of the connection in the "Host Status" page, where A4-ed starts with the MAC address of Moto Defy;

After completing the settings in the picture above, restart the router in "System Tools", and here you will complete the setup of Mac filtering. Of course, before activation, you also need to enter the MAC address of the wireless network card of the corresponding laptop.

Second, the settings of the mobile phone.

1) Go to your phone's settings menu.

Press the "Menu Key" at the bottom left of the phone, and then hit the "Settings" button on the phone screen; Click to enter the settings menu.

2) Go to the Wi-Fi Settings menu.

Click "Wireless & Network" under the "Settings" menu, and then the corresponding settings interface will be carried out:

As you can see from the figure below, WLAN (wireless LAN, that is, commonly referred to as wifi) is not activated, click the select button behind to turn on WLAN;

After the Wi-Fi (Wi-Fi (Wireless Local Area Network) function is enabled, click Wi-Fi Settings to select a wireless network.

Remember: the wireless network SSID set earlier in the wireless router is WX401

3) Select Wireless Network.

Open the WLAN setting is to let you choose which wireless network to connect with, some are with a lock pattern to indicate that you need to enter a password to connect, here MX401 is not locked, it means that you can connect directly, click "MX401", to connect to this wireless router, here will pop up the confirmation interface:

Click "Connect" in the confirmation dialog box in the image below to connect to the MX401.

If the settings are correct, you will see a new icon on the left side of the "3G 1X" place at the top, which means that you have connected to WiFi and can access the Internet.

Maybe the landlord may ask, can other moto defy mobile phones can be directly connected to your home wireless network to surf the Internet, this is not possible, because each network device connected to the network has a different MAC, you set only your mobile phone can be directly connected, and other mobile phones are not accessible.

It's a problem with the wireless router settings, and it has nothing to do with the phone settings, as long as the phone can be connected to the router. Mine has solved the wireless Internet problem, and after an afternoon of research, UC can finally open the web page. Change the transmission mode in the wireless connection of the wireless router to the penultimate one, and the default setting will definitely not work.

You see, what network is your QQ UC priority, does your router need to specify the IP (that is, the user), this is very important, if you need it, you must specify it, otherwise it can't be used if it's connected, I hope it can help you.

Choose a static IP, and the automatic IP is removed

Hello 1Motorola ME525 already has a lot of folk Android ROMs,At the same time, the official has also been upgraded to ME525 (that is, the Android version of ME525+),If you are licensed,You can get the customer service to upgrade。 If you have a strong do-it-yourself ability, you can also watch the tutorials on the Blade forum and upgrade yourself.

2.At present, there is no news that ME525 can upgrade Android, and the civilian ROM has not yet come out. In fact, not only me525, but now many Android phones do not have ROMs that can be upgraded to, I personally think or they are enough.

After flashing, it can support up to 10 points of touch, but daily 2 points of touch is enough, playing games, software or something, 2 points of touch can already be satisfied.

You can upgrade to now. Then you can upgrade in the air to upgrade no play. 2-point touch is normally sufficient.

There are indeed a considerable number of me525+ on the market that are brushed out of me525. Because the hardware is pretty much the same.

The CPU of ME525 is TI OMAP3610 (800) and ME525+ is TI OMAP3620 (1G), and it remains to be verified whether the two CPUs are one or the other. Moto plays the numbers game entirely. The ME525 CPU unlocks to 1G without any problems at all.

Even the ultra-high is not too stressful. And the most suspicious thing is that they use exactly the same GPU SGX530, in fact, it is natural for the CPU to bind the GPU, but with a graphics card, it has to make people suspect that the two CPUs are the same model, but Moto is not honest.

And the ME525 will automatically become ME525+ after the official system is released, and the CPU will also be unlocked to 1G. It makes people wonder if their hardware is exactly the same. Because in other respects, the ME525+ has hardly changed at all, except for a slight change in the color of the red and white shell.

At least the black ones are completely unrecognizable on the outside. As for the gameplay, because the two architectures are exactly the same, the graphics card is the same one, and the CPU is actually the same, and the performance under the same system is almost impossible to see the difference.

One thing is certain, though. The battery of the ME525+ is indeed large. From 1500mAh to 1650mAh. So at present, the only thing that can be preliminarily distinguished by the naked eye is the battery capacity.

As for whether the battery of parallel goods has been replaced, this is unknown, and it can only depend on the character. Normal use is basically not much different. If you want to check in more detail, check the origin of the machine through the imie serial code on the mobile phone.

Maybe it will give you a comfort. If you believe the packaging, I don't think there's any need for them to replace the ME or MB525 shell with the ME525+ for this profit. Even if it is directly said to be MB525, it still does not affect the sales of mobile phones, because most people who know DEFY know that ME525 is ME525+ after brushing.

It makes no difference at all to use.

First of all, the parallel import is MB, not ME, and ME is a licensed model.

If you want to see the version, you can check the Internet by looking at the mobile phone IMIE serial code, IMIE can be seen in the fuselage, and you can also enter it in the dial interface. Enter this serial code online to see the place of sale (country of sale).

Of course, 525 can also be overclocked and flashed to 525+, but generally conscientious sellers will not do that. After all, it is two models and it is easy to goof.