The width of the skates will not affect the skating effect

The wide skates will cause uncomfortable feet and uneven force when skating, which will not only affect the skating effect, but also may cause serious consequences.

How to choose skates:

First, see whether the knife body is straight.

Hold the skate upside down, hold it up, the cuff down, and use one eye to see if the blade is in a straight line, the straighter the better. Whether the blade has a deep cut, if there is a deep cut on the blade, it will affect the skating.

When buying new shoes, you should try to choose skates with shallow cuts.

2. Look at the connection between skates and skates.

Generally, when viewed perpendicular to the ice hockey shoes, the skate blade should be located in the middle of the skate, and the left foot knife of the speed skating shoe should be slightly deflected to the right by about 15 degrees, and the right foot knife should be slightly deflected to the left by about 15 degrees.

3. See if the skate blades are shiny.

Some skates due to poor steel or silver plating, the surface of the knife body begins to rust, the silver plating has fallen off, a good skate should be very bright, no rust marks on the surface.

Fourth, see if the number is appropriate.

The number of skates must be suitable for me, neither too big nor too small, when trying on shoes, the shoelaces should be loosened and then tightened in turn, and the number must be determined to be suitable to buy, and must not be compromised.

Fifth, see whether the bearing is smooth.

Each wheel should have a bearing on both sides, separated by a sleeve in the middle. Generally, single-row shoes use plastic sleeves, and more advanced ones use metal sleeves; The metal has less friction and gives the bearing maximum rotational capacity, so the wheel turns at a higher speed.

It doesn't matter if it's wide, but if it's long, it will have an impact.

It won't affect you, but only if your feet don't shake inside.

Generally, buy roller skates, too big is not good, too small is not good, big affects the skating, if it is to practice flat fancy, big, some difficult actions can not be done.

If it's too small, the comfort won't work, and it will squeeze out paronychia

There are several reasons why skates won't learn:

1. Insufficient friction between the sole and the ground: The sole material does not correspond to the ground material, and the friction is insufficient, so it will be very difficult to learn to skate.

2. Improper force: learners cannot use the strength of their legs to form enough force, which will also affect the effect of learning.

3. Unskilled technology: Learners' failure to master the correct techniques, such as gripping the ground, changing the direction of travel, etc., will also affect the effectiveness of learning.

4. Lack of patience: Learners' lack of patience and fear of injury will also affect the effectiveness of learning.

To learn to skate well, you need to wear the right skates, be patient, take safety measures, practice, and especially remember the correct technique and use the strength of your legs.

Learning to skate requires patience and training, but sometimes it can be due to technical issues, such as insufficient grip on the feet, lack of balance in the body, or lack of skating skills. Sometimes it can also be due to technical issues, such as poor quality of skates, insufficient friction in the skating rink, or lack of skating skills, etc. Also, learning to skate can be due to lack of training, not enough practice, or not enough patience, etc.

In conclusion, learning to skate requires patience and training, as well as being aware of technical issues, as well as lack of training and lack of patience, among other things.

There are many reasons why skates don't learn. First of all, if you don't master the technique enough, you will do it inaccurately, and the control and balance will not be good, so you need a certain basic study and practice to master the technique. Secondly, the body posture should be correct when skating, so that the force can be better controlled, and the mind must be linked to the body movements, so that the technique can be more easily mastered.

There can be a variety of reasons why a person can't learn to skate, including not being patient enough, not being able to keep up with technique, or not having enough physical strength, etc. It is recommended to start with basic movements and accumulate a certain foundation before you can become proficient in using the skills.

Hello, learning to skate requires a certain amount of time and patience as it requires you to master many tricks such as sliding, turning, jumping, etc. You need to practice slowly in a safe environment, step by step, and practice often so that you can better master the technique and eventually achieve the purpose of skating.

Ice skating is a technical sport, and when it is learned, it requires scientific training and skilled practice, and correct footwork can be learned well. If you don't master the technique and footwork correctly, you won't be able to learn.

The answer is as follows: because you really don't do it as well as others casually because you go all out, and you don't have talent, so you can't learn.

In the process of learning to skate, it is not uncommon for practice to be effective in mastering new skills. In general, you can try to change the method of technical learning, show learning with graphics or tasks, add diversified exercises, and provide timely feedback, so that students can feel the satisfaction brought by progress, and gradually let students build proficient skills.

The difference between the two is mainly due to the braking settings of single-row skates such as pattern and top speed, which are explained as follows

There are two types of skates on wheels: roller skates and roller skates.

1. The sole of roller skates is two rows of four wheels, and there is a cylinder in the middle of the toe (for physical brakes), both shoes are available, and there is little difference between the left and right of this kind of shoes.

2. The soles of roller skates are a row of four wheels, and generally only one brake is on the right foot (as shown in the figure below), because for beginners, it is easier to lift the toe of the right foot in sliding; For taxiway enthusiasts who have learned to ride independently, the brakes can be removed (there is no difference between the two after removing the brakes).

If there is a little difference in appearance, it is normal, some manufacturers deliberately design the two shoes differently, but the general difference is not big, but if the size is different, then it is wrong

It's different. The length is something else, if it's a speed skate, only one has brakes, so it's a little different. It's normal.

Because one of you wears a fancy shoe, and the other wears a four-by-side one. That is, wearing two different kinds of skates.

1. Exercise leg strength.

When skating, the center of gravity of the body is down, and the whole body is basically supported by the strength of the legs, so before learning roller skating, you can strengthen the strength of the legs, such as zama steps, running, etc.

2. Learn how to stand.

The way to stand with roller skates on is different from the way we usually stand with shoes on, and it is easy to fall if you just start learning to stand directly on a stool with roller skates on. The basic way to stand is to put on your roller skates, squat on the ground, put your left heel against the inside of your right foot, form a T-shape, support each other with your left and right feet, and then slowly stand up with your hands on your knees.

3. Walk on the spot.

If you want to be able to skate, you must first be able to stand firm and walk slowly. When practicing stepping, you can stand on the ground with friction on the grass or carpet, step forward with your feet from the T-shaped to the outer figure-eight, shift the center of gravity to the left leg, stretch the right leg back, shift the center of gravity to the right leg, stretch the left leg back, and repeat the exercise with the center of gravity on the left and right legs.

4. Gliding practice.

The basic movement of gliding is to lunge with your left foot in front of you, push your right foot back to the side, lean your upper body forward slightly, and put your weight on your left foot. Then retract your right foot to the inside of your left foot, slide your right foot forward, push your left foot back to the side, and shift your weight from your left foot to your right foot.

5. Master the method of stopping.

Roller skates are wheels under the wheels, stop is not we simply stand can stop, the general stopping methods are: middle cut method, A-word stop, T-word stop, turn sharp stop. What beginners need to master is the middle cut method, with the feet parallel, push the foot with the brake forward, and the toe is slightly upward, so that the brake can grind to the ground.

6. Learn how to fall with less damage.

Beginners are inevitably able to wrestle, so keep your body forward when you fall, avoid falling backwards or let one part of your body fully withstand the impact to reduce the degree of injury to a certain area.

Skate skating tips:

Clause. First, you should choose shoes with smaller wheels, with a diameter of about 60mm, small wheels that are easy to control, and wheels that are soft.

Clause. Second, you must practice straight braking first, and then practice turning. Practicing your turns more helps you improve your technique.

Clause. 3. Use the outer figure-eight feet when standing. Putting your legs together inward prevents you from slipping forward, and spreading your legs outwards prevents you from slipping backwards. The ground should be level, the small wheel has high requirements for the ground, there is no slope, there should be fewer people, there should be no car, pay attention to safety, and wear protective gear.

Clause. 4. Double-row skating is the foundation of all ice skating styles. If you are sliding on your own, then put on your shoes and try to step first, and then slowly slide forward by holding on to the railing, of course, it is easy to fall.

The skates look like this:

Ice skates belong to a kind of recreational sporting goods, which are divided into three types: skate shoes, roller skates, and roller skates. The sole of the skate shoe is a sharp blade, the sole of the roller skate is two rows of four wheels, and the sole of the roller skate is a row of four wheels, which uses the principle of rolling and sliding to allow people to glide at high speed and make all kinds of gorgeous movements.

The skates are made up of white shoes and silver skates. The shoe on it is different from ordinary shoes, its upper is very high, it is used to protect the ankle, so that it will not be injured when wrestling, it is full leather on the outside, and the inside is full hair, which is comfortable and warm on the foot, and there is a shoe cover on the outside of the shoe, which is used to protect the shoe.

The color of the shoe cover is based on your hobbies and the color of the clothes, and my shoe cover is my favorite rose red. And it is made of steel, the front of the skate blade has a tooth, which is used to slow down and jump, and the skate also has a knife sleeve, which is put on the skate blade when resting, so that you can walk smoothly and protect the skate.

Every time I put it on, I am happy, and this joy makes me skate as fast as the wind on the ice rink. After each ski, I use an absorbent cloth to dry the ice cubes off my skates. Then put that beloved pair of skates in a beautiful case and let it rest so that it can bring me joy next time!

Care of skates:

1. After each skating, wipe the knife surface with a soft cloth and put it into the skate sleeve to avoid moisture or damage.

2. Skate blades should not be in contact with acidic substances to prevent rust.

3. Wet skates should not be roasted over fire, but should be wiped and dried.

4. After winter, wipe the skates and put some butter on them before collecting skates and skates; Wipe the stains on the skates with a cloth dipped in detergent, dry the shoes, rub a layer of shoe polish to protect the leather, and stuff the shoes with paper balls to absorb the moisture inside the shoes. If it is an artificial leather skate, you can remove the stain with a normal detergent.