As soon as my computer runs the program, it is very stuck, and the host is always roaring very loudl

The booming sound you are talking about must be the sound of the cooling fan in the chassis rotating, and this sound will get louder and louder over time, this is because of the lack of lubrication of the fan bearing, so it is necessary to keep the host clean, the fan also has regular lubrication, and there are many reasons for running the program card, 1, too much system garbage, too much hard disk fragmentation, insufficient space on the C disk, 2, there are viruses, Trojans or malicious plug-ins in the system, 3, software and hardware compatibility, 4There is too much dust in the main machine, which causes the operation to be too slow.

The solution, antivirus, clean up the garbage, clean up the dust inside the host, check the C disk space, and then reinstall the system or restore the system. Of course, everything must be built under the condition that the hardware facilities are ideal

First of all, we have to see if the sound is made by **. I think it's very likely that the CPU fan and the power supply fan are ringing all the time or sometimes, the former try to change the fan or add some oil, the latter is fine, and my computer is also very.

Since the landlord's description of the sound is not very accurate, give 3 answers.

1. The noise of the CPU cooling fan.

2. The hard disk has bad sectors.

3. The machine is placed in an improper position.

Now the hardware of the computer has been intelligent, in the general working state, it can automatically adjust the speed of the CPU fan, when the workload of the computer is very large, the CPU computing speed surges, and the power consumption also surges, so the CPU fan will also automatically accelerate the operation to increase the heat dissipation to ensure the safety of the CPU. Of course, this kind of automatic operation will also appear on some graphics cards and memory.

Generally, the wind destroys the fan and does not sound like this, but sometimes (for a short time) it will sound like this.

Other reasons: It may be that when the fan is working, that vibration is causing the chassis to resonate. This situation is more common in some non-dismantling chassis (no screws, no buckles).

The problem of the optical drive, when the optical drive is read and the disk is adjusted and rotated, it will make a loud sound. (The disc forgot to pop up in the CD-ROM drive).

Problems with hard disks: Under normal circumstances, if the hard disk is not fixed firmly, it will also vibrate greatly under heavy load.

In addition, the chassis design is not perfect, and sometimes the resonance is strong.

If there is a boom, it should be the problem of the fan (CPU fan, power supply fan). If it squeaks, it's a hard drive. If the hard disk rings, the finch pants have a bad sector, and the hard disk with a bad sector is almost going to hang up. Open the case and listen to it.

Computer parts will generate a lot of heat in operation, among which the CPU, graphics card talk, hard disk is more prominent, so the CPU wind is rotten bridge fan (some have a graphics card wind buried fan) is the main sound of the **, different CPU fans The sound size is also different, and there are also some brands of hard disks that are louder when running, but mainly fans.

It should be celebrated as a power supply, and the Yuqi cover will remove the power supply to see.

Is it that the shell is loose, or the power supply fan is lubricated with some oil or something.

There is also whether there is a fan on the graphics card.

I. The electric hand brain is the fan on the graphics card.

The main considerations are optical drives and power supplies.

Just remove the disc drive and take out the empty disc.

Maybe if you knock it down, it won't sound like it.

If that's the case, it's the fan of the power supply.

Hard disk problems, you open to see.

It may be broken.

The hard disk has a bad sector.,Repair it to see if it can be recovered.,If you can't recover it, it's a damaged hard disk.。

If there is a problem with the hard disk, it is recommended to go to the repair computer to debug it, otherwise it will not be adjusted well if it is broken.

It may be that you accidentally opened some messy software, just turn it off.

1. Reload to see if it will.

2. If you can repair the hard disk, it is recommended to use MHDD

May be 1. For poor heat dissipation, it is important that the CPU is well ventilated. Working too long can also lead to: CPU heat dissipation problems are also an important cause of computer failures.

2。There is too much dust inside the case. Please clean it in time and keep the inside dry and clean. 3。It may be that the memory module is loose, and it should be pulled out to check whether it is damaged.

Aging or improper use of hard drives is also one of the reasons. Professional software can be used to troubleshoot the problem, and if the damage is serious, the hard disk can only be repaired or replaced. 4。There are compatibility issues with hardware and software. 5。If the memory usage is too large or the memory space is too small, it needs to be replaced.

End unnecessary programs or low memory configuration.

5。Hard disks are logically or physically pure and not bad.

6。Virus Rock Detection.

Infiltrate the anti-virus software. 7。If there are too many junk files or fragmented files, it is recommended that you clean up the system junk regularly.

Check to see if the capacitors in your computer's motherboard have burst. 9.Reinstall the system.

Copy must be reported.

Shame on copying.

Analysis of computer crash phenomena.

If your computer is newly built, do you see the light on the chassis panel or hear the fan inside the case when you turn on the power switch on your console?

1: I didn't see the panel indicator light on the case, I didn't hear the fan, and the computer didn't respond at all.

If you find.

Computer cases. The indicator light on the panel is not lit and you don't hear the fan turning, indicating that your computer is not plugged in, please check the power supply.

2: I saw the indicator light on the case panel and also heard the fan turning.

I saw the indicator light on the case panel and heard the fan turning, which indicates that the computer is plugged in. Then the monitor's.

Power indicator.

Is it lit? a) The indicator light of the monitor is not on.

If the monitor's light doesn't light up, check that the monitor's power cord is plugged in and turn on the monitor's power switch. [It should be noted that there are some monitors whose power indicator is not lit when the main unit is not emitting a signal.] ]

b) The indicator light of the monitor is on, is there any text displayed on the screen?

There is no display on the monitor screen, please check whether the signal cable of the monitor has been connected to the main unit, and please connect the signal cable securely.

on the interface of the graphics card. And confirm that your case horns are intact and ready to sound.

The horn was heard:

If it is the horn that emits a "tick......Tick ......"Two consecutive beeps are relatively short, and the alarm sound is repeated.

Explain that your graphics card is not plugged in, or.

Poor contact. At this time, please turn off the power, open the case, reinsert the graphics card, and set the .

Screwing tightening. Some.

The chassis of the compatible machine is not designed reasonably, if the screws on the AGP graphics card are tightened, one end of the graphics card will be warped, resulting in poor contact, so you have to do it yourself and find a way to fix the graphics card. If it still crashes, and continues to make the sound mentioned above, it may be that there is a problem with your graphics card, it is recommended that you take it to another machine to try it, if it still doesn't work, then you need to change the graphics card.

If the horn sounds "......Tick ......Tick ......"Each sound is long and repetitive.

This sound is made because the system did not detect it.

Memory module, it is possible that there is a problem with the memory module, it is best to reinsert the memory module and try it on a different memory slot. If that doesn't work, replace the memory module.

No horn sound was heard.

In this case, we have to check the cables and the individual accessories one by one. First turn off the power to the main unit, then unplug all the cards (including the graphics card) plugged into the motherboard, and then count the hard drives.

Unplug the data cable, floppy drive data cable, and reset cable on the chassis panel (keep the power switch cable and speaker cable). Only the CPU and memory are left on the motherboard. Because sometimes res

The ET switch is jammed, causing the motherboard to always be in a reset state, and the computer will not boot. In addition, if the data cable of the hard disk is reversed, it will also cause the host to be unresponsive.

Then turn on the power again, and pay attention to whether the speaker is making sound.

50% of the hard drive is faulty.

Try to fix it (Norton Disk Repair).

Otherwise, see if the memory module is not plugged in properly and whether there is ash on it.

Hardware issues.

Open one end of the chassis box.

When it rings again, listen to whether it is the hard disk ringing.

If yes, just a C drive.

Then the GHO file restore will do it.

1.It may be caused by the CPU suddenly occupying 100%, and the computer is stuck and cannot be operated.

2.Out of memory, you may have too many processes running and consuming a lot of memory.

3.There is a problem with the hard drive, and the computer cannot turn over the data.

It feels like the problem is poisoned. If there's nothing to clean up the virus.

It's a good idea to check if there's something wrong with your keyboard and mouse.

1. I can't give a definite answer to the Internet, it depends on how your device is connected, and whether there are any special restrictions on the users of the account on the telecom side.

2. After redoing the system, it will automatically restart after running for a period of time, it may be that the G version of the system you use is incomplete, and it is recommended to re-use the installed version to make the next system. There is time to detect whether the hard disk has bad sectors.

3. Check whether the hardware has poor contact, especially the memory.

4. Check whether the CPU radiator fan is normal.

5. Dust the chassis.

Hello, please analyze and solve it from the following aspects.

1 Computer poisoning or malware may also cause computer abnormalities, the solution is to upgrade the anti-virus software, anti-virus, if it really doesn't work, reinstall or restore the system. Reinstalling or restoring the system can completely resolve the software side of the problem.

2. Unreasonable configuration, uncoordinated, and incorrect BIOS settings will also cause computer abnormalities, so you should find more professional personnel to solve the problem when installing or upgrading hardware. You can send the configuration down to help you see if the configuration is reasonable.

3 The high temperature of the computer will also cause the computer to be abnormal, it is recommended to use Master Lu software to measure the temperature of the hardware, and then solve it.

4. Due to the voltage instability point, the power supply is not enough, and it will often cause computer abnormalities, if it is caused by these reasons, configure a voltage regulator, and replace the high-power power supply to solve the problem.

5 Caused by running large software and programs, such as playing big games, using large software, watching Blu-ray movies, etc., it should be caused by poor computer hardware configuration. The only solution is to upgrade the computer configuration and optimize the computer system.

6 Old computer Because there is too much dust in the case, it is easy to cause computer abnormalities caused by short circuits. Clean the inside of the chassis frequently.

7 Old computer Due to the long period of use, the capacitance of the motherboard circuit is aging, which will also cause abnormal problems in the computer. Only sent for repair or replacement.

8 Old computer hard disk will also fail after a long time, causing the computer to crash, which requires the use of hard disk testing software to test the hard disk, repartitioning the installation system can repair the hard disk logical bad sectors, can not be repaired, and only to replace the hard disk.

If it helps, please choose the answer you are satisfied with!!