Does it cost to change a meter? Is there a charge for changing the meter at the property?

At present, the power supply department is responsible for the purchase and replacement of smart meters, and replaces them free of charge for customers, without any cost to customers.

It depends on the situation, if the power supply bureau installs overload protection, as long as you have not changed the empty open, or leak the insurance, then the power supply bureau is responsible for the replacement, because the power supply bureau has several levels of protection, generally will not be broken, you can change the air or leak the insurance at will, not to mention that you are fully responsible, but also fines, trace whether there is electricity theft.

According to Article 77 of the "Power Supply Business Rules", after the installation of the metering meter, the user shall properly protect it, and shall not pile up items in front of the meter that affect the accuracy and safety of meter reading or measurement. In case of loss, damage or overload burnout of the billing energy meter, the user shall inform the power supply enterprise in time so that the power supply enterprise can take measures. If the charging energy meter fails due to the responsibility or force majeure of the power supply enterprise, the power supply enterprise shall be responsible for replacing the meter without charge; If it is caused by other reasons, the user shall bear the compensation fee or repair fee.

If the meter is burned due to overload, the user shall be responsible for compensation.

If you are a user of the power supply department in Guangdong Province who reads the meter to the household, and the meter is faulty, it is recommended that you can call the power supply customer service **95598 to reflect, and the power supply department will arrange the relevant account manager to follow up for you. However, if your meter is burned out, it is recommended that you bring the identity information of the head of household to the local business office to apply for meter replacement business.

Summary. Hello! We're happy to answer for you!

Kiss! Want. The electricity meter in the community is uniformly replaced, and the property in the community shall charge the fee for installing the meter.

Is there a charge for changing the meter at the property?

Hello! We're happy to answer for you! Kiss! To change the meter in the community, the property in the community should charge the cost of installing the meter.

The meter has been used for 10 years, should the property be charged for replacing the residential meter?

Yes. Charges for replacing electricity meters in the property.

Is 300 yuan reasonable If the meter is replaced, the charge of 300 yuan is reasonable, and the owner will pay for it. Property. The specific responsibilities of property service enterprises mainly include:

1. Maintenance and maintenance of the barricade industry and its supporting facilities. For the property, the mechanical and electrical equipment, air conditioning system, water supply and power supply system, telecommunication system, public facilities, etc., must be in good condition.

If the meter is damaged under normal use, you do not need to bear the cost of replacing the meter. If the electricity consumption in the community is directly supplied by the power department, the meter is broken and we are responsible for replacing the meter free of charge, but this community is a power supply community, and the residents belong to the property company to distribute the meter, which is managed by the property department, and the cost of replacing the meter should be decided with the property itself and the residents.

If the meter burns out due to improper use in the process of electricity use, you need to bear the cost of replacing the meter.

Legal basis. Article 26 of the Electric Power Law of the People's Republic of China (2018 Amendment) The power supply business institutions in the power supply business area shall have the obligation to supply power to the users in the business area in accordance with the provisions of the state; Units and individuals applying for electricity in their business areas shall not be refused to supply electricity in violation of national regulations. Applications for new installation, temporary use, increase of electricity capacity, change of electricity consumption and termination of electricity shall be handled in accordance with the prescribed procedures。

Power supply enterprises shall announce the procedures, systems and charging standards for electricity consumption at their business premises, and provide information on user notices。

The property company contacts the power supply bureau, and then the power supply bureau replaces the meter... If it is still temporary electricity, the electricity meter purchased by the property needs to be installed by the property management company itself, so that the property can measure and ask the owner to collect the electricity bill. If during the warranty period, the real estate company will give you a change, generally at the time of delivery of the warranty materials, out of the warranty period, the owner has to pay for his own money, the property will only change the public table.

Extended information] The procedures for new electricity meters installed by residents are as follows:

1. Residents should bring their original ID cards and their copies, and the original and their copies of the house ownership certificate to the power supply business window in person to receive the "Application Form for Installation by Telegraph", fill it out clearly as required, and submit it to the business acceptor at the window for registration.

2. If the ID card is lost or expired and not handled in time, the household registration book can be issued; If the house ownership certificate cannot be issued, you can fill in the "Application Form for Installation by Telegraph" and go to the village committee where the household registration is located to affix the official seal.

3. If the trustee entrusts another person to act on his behalf, the trustee shall present the power of attorney, the original and a copy of his ID card, and the original and a copy of the applicant's ID card.

2. After the window business acceptor verifies that the materials provided by the residents are correct, the original will be returned and the copies will be archived. Arrange on-site surveys according to the "Application Form for Installation by Telegraph".

3. The load surveyor goes to the residential electricity site to investigate the power supply conditions, verify the electricity demand, determine the electricity capacity, the nature of the electricity, the power supply mode, the power supply path, the metering method, the metering device configuration, etc., and formulate the power supply plan.

Fourth, the business acceptor will issue a notice of power supply plan to the customer, and within 5 working days from the date of issuance of the notice, the residents will go through the payment procedures, and the construction personnel will install the meter and turn on the electricity.

The last digit of the reading of a single-phase meter is generally a decimal place, (there is a decimal point, or a red number box, or a dotted box and other marks, so you should pay attention to the degree when looking at it.) In addition, it is equipped with a current transformer.

When reading a single-phase meter, it is necessary to multiply it by the multiple ratio of the transformer to be the actual electricity consumption. A very small number of long-term do not check the meter, when the meter reaches the maximum limit value of 99999, the meter will start counting from 00000, and the new degree at this time must be added to the original reading from the beginning to the maximum value to be accurate.

Useless.

The cost of electricity has nothing to do with the meter. It is always the actual electricity consumption that affects the amount of electricity billed, not what meter is used. You can see how many levels of energy consumption of household appliances in the room are, and usually, the higher the level, the more electricity is consumed.

Then there is the possibility to check whether the power supply line is aging and so on.

Introduction to Household Electricity Meters:Ordinary electricity meter: our household electricity meter is an active energy meter, which records the active energy consumed by electrical appliances, and the reactive energy is not recorded, and only active energy is consumed by ordinary bulbs, electric furnaces and other heating wire heating elements, and some inductive or capacitive loads (motors, televisions, air conditioners, fluorescent lamps, etc.), in addition to the consumption of active electric energy, there is also the consumption of reactive electric energy.

That is to say, the apparent power of the induced load is the vector addition of the active power and the reactive power, and the difference between them is 90 degrees, and the apparent "degree" work is of course greater than the active power recorded in the watt-hour meter.

The composition and working principle of electronic smart meters are very different from those of traditional inductive energy meters.

If you are a customer of Guangdong Power Grid Company, the meter belongs to the assets of the power supply enterprise, and the meter fails, please bring the identity certificate of the electricity customer to the local power supply business hall to apply for meter replacement business. If it is caused by other reasons, the user shall bear the compensation fee or repair fee, and the specific situation shall be subject to the on-site investigation by the staff.

If you have any other questions, please call the 24-hour power supply service **95598.

If the meter is damaged under normal use, you don't need to bear the cost of replacing the meter, and if the meter is burned out due to improper use in the process of electricity, you need to bear the cost of replacing the meter.

You will have to pay for this yourself. Because all the costs of installing the meter for the first time are borne by the developer, and if it is damaged during use, the owner needs to bear the responsibility for replacing it again.

If it is paid to the power supply bureau, the power supply bureau will replace the meter for you, and the property company that pays to the property company will change the meter for you.