Such as assembling an outdoor tent? How to set up and install an outdoor tent

2) Methods and techniques for pitching tents.

Once you have chosen a place to set up your tent, you can easily set it up with four people working together in order, so it doesn't take much time. In order to consider the condition of the tent when it is removed, it is more convenient to write down the initial situation.

There are many different types of tents, and at the same time, there are different ways to make, mix and match. Small tents, A-shaped tents, and wall-shaped tents are combined with cables due to the order of construction, while the recently developed and improved warhead and hut-type tents are "modular tents".

The following is an example of one of the basic tents, which is a popular wall tent, to illustrate how tents can be set up.

1) Location decision. After considering the wind direction and terrain, choose a flat place.

2) Inspection of tent equipment. Pour out the items stored in the bag and inspect each part one by one. For the convenience of removing the tent and not to leave anything out, it should be recorded in advance.

3) Lay the floor mat. After the floor mat is laid, the four corners are fixed with nails. If it is in a humid area, spread the mat first, and then lay a mat on top of it.

4) Erect the pillar and pull the main rope apart. At the same time, the tip of the upper part of the pillar is inserted into the holes of the two pillars of the curtain pillar, and the left and right main ropes are pulled up to avoid tilting left and right. In this way, the main body of the tent is formed.

5) Adjust the main rope and pull up the corner rope and waist rope. With a rope attached to the main rope, adjust the shape of the tent and place the two pillars vertically on the ground. Secondly, the corner rope and waist rope are adjusted with the branch rope to make the shape of the tent appear.

6) Fix the wall. Connect the bottom cloth of the tent, the floor mat and the lower part of the wall.

The above is the order of setting up a wall-type tent, and the four people work together, and it can be completed in about 10 to 15 minutes in a proficient state.

Usually, in order to reduce the impact of wind, rain, sun exposure and severe cold, a roof cover is added. When inserting the pillars into the holes at both ends of the building, first add the roof cover, and then pull the main rope up, after the main rope is fixed with nails, take the end of the roof building as the apex, form the two sides of the equilateral triangle, and pull the length of the bottom edge into the same length as the pillar. From the top of the roof, the corner rope should be on the extension of the diagonal, and the waist rope should be in a straight line with the corner rope.

In the past, when the tent was set up, ditches could be dug around it. Now, from the standpoint of protecting nature, we will no longer dig ditches except in water depressions.

1. Open the steel frame bundle and handle it carefully;

2. Install the top of the tent, first install the herringbone beam, and then put the drawing on the herringbone beam. Connect the herringbone frame with a beam, then tighten the wire drawing with a flange, and finally put the large top tarpaulin on it and fix it;

3. Insert the upright rod (side leg) at the junction of the beam, and both sides are the same, both are plugged in, and then the ground beam pipe is erected;

4. Install the pole at the door, so that the tent frame is installed, and then install the mountain and wall cloth in a good position;

5. Install the tent rope and ground anchor (so that the tent can be fixed), and then use soil around the tent to make it waterproof and wind into the tent.

The above is the installation method of outdoor construction tents, if you still don't understand, please ask,

1. Floor cloth. Spread on the ground before pitching the tent.

2. Moisture-proof mat. Once the tent is set up, it is placed on the ground inside the tent, like a mattress at home.

3. Sleeping bag. For sleeping, it is equivalent to the mat and cover at home, which is placed on the moisture-proof mat and used by people.

4. Stoves and tableware. For cooking, if you bring your own dry food and cooked food, you can do without it.

These are the 4 standard kits that can be used with the tent. Among them, the accessories of the tent itself include ground nails, wind ropes, repair subsidies, etc., which belong to the content of the tent itself.