Lenovo 20161 laptop how to connect to TV

Dear Lenovo users, hello!

Normally, after connecting, you can directly cut the screen through the shortcut key. If there is a problem, change the cable first. Or let the laptop connect to the desktop monitor test, if it can't be cut out, please go to the service station to check the machine interface.

If there is no problem, it may be a compatibility issue.

IDEA Forum.

Think Forum.

Lenovo Community.

Driver Genie installation (plugged in HDMI at that time)

Take a look at the TV's setup manual?

First of all, there is a VGA connector on the notebook,You find this header and then connect the GA cable to this socket,Then connect the other head to the TV's GA socket,You can complete the image projection。

As for the sound, you can use a headphone to a lotus head cable, connect to the audio input cable of the TV, and then you can synchronize the sound of the computer.

You can also use an active speaker directly and connect its headphone jack cable to the jack of the computer, and then you can also emit the sound of the computer.

Speaking of laptops,Everyone should know,Some people ask how to cast the screen of the laptop to the TV,Of course,Some people want to ask how to dim the laptop screen,What the hell is going on? In fact, how to project the screen of the computer to the TV wirelessly,Next,Let's teach you 5 ways to project the screen of the laptop to the TV,I hope you will like it。

5 ways to cast your laptop to TV.

Problems with laptop to TV?

Teach you how to cast the screen from your computer to your TV.

How can I wirelessly cast my laptop screen to a TV?

This can be done by following the steps below.

Projecting the laptop screen onto the TV,The premise is that the TV must have HDNI or VGA interface,Today's LCD TVs have this interface。 Here's how:

1. Use HDMI data cable, or VGA data cable, connect the computer and the TV, if the computer and the TV interface do not match, you can use the transfer interface, as shown in the following figure:

2. Press and hold the win key on the keyboard after powering on, and then press the p key, as shown below

3. Switch on the interface that appears, as shown below:

1. By default, both the computer monitor and the projector have signals.

2. Computer only: Select this option to turn off the projector.

3. Projector only: Select this option to turn off the computer monitor.

4. Copy: The monitor and projector display the same picture.

5. Expansion: The monitor and projector display different screens.

1. Set the resolution on your laptop to the best resolution supported by your external TV.

3. Press the Win+P key combination to call out the switch display option:

You can buy an HDMI cable directly, and you can connect the computer and the TV together, so that the computer can be directly projected to the TV for display.

1. First point the TV remote control at the TV, press the signal source button to pop up the signal source menu option of the TV, find the HDMI mode, select and press the confirm button to switch.

2. After switching, press the function combination key on the laptop to switch the display mode, such as FN+F5 or F7 key (the switch button is different for different computer models) to synchronize the content displayed on the computer screen to the TV for **.

3. Note that some TVs do not have plug-and-play characteristics, and there may be no response (no sound or no image), so you need to restart the computer once after connecting the cable to identify the TV; Also, the screen resolution of your computer should be set to a resolution range that your TV can support.

1. Plug the HDMI cable into the HDMI port of the laptop, as shown in the figure below.

2. Plug the other end of the HDMI cable into the HDMI 1 port of the TV, as shown in the figure below.

3. Turn on the TV, and then click and press the "Source" button on the remote control, and select "HDMI 1", as shown in the figure below.

4. Open the laptop, right-click on the blank space of the desktop, and select "Screen Resolution", as shown in the figure below.

5、In the "Personalized resolution""Multi-monitor"Settings"Select"Copy these displays",Then click OK,The desktop screen of the notebook will be projected to the TV。