What should I do if the temperature probe of the wall hung boiler fails?

1. If there is a short circuit or poor plugging in the temperature sensor line, it can be reconnected as long as the wire is replaced and the line is soldered.

2. If the temperature sensor is damaged inside, it is recommended to replace it with a new temperature sensor. If the temperature controller fails, replace the main controller.

3. If the insulation layer connecting the wire is damaged, the wire can be replaced.

The reason why the temperature of the wall-hung boiler cannot go up is introduced here, if there is a failure of the temperature sensor, it is necessary to pay attention to distinguish.

The failure of the temperature probe of the wall-hung boiler will have a certain adverse impact on the overall use, so in order to ensure that the wall-hung boiler is more scientifically and stably applied, it must be replaced in time.

Find a replacement temperature probe after sales service.

The plate changer is in a relatively low position in the whole wall-hung boiler, and it also has a certain water capacity, taking the commonly used 12-layer board changer as an example, its water storage is about 300ml.

When the water in the plate is frozen, the plate will expand, and the sealing surface matched with the waterway valve body will also be convex and deformed, resulting in the loosening of the fixing bolts, resulting in gaps and water leakage.

The pump seat cavity has the largest water storage capacity, so the most common freezing cracking site is the pump seat. Whether plastic or metal, it is not immune to the tremendous expansive force of water condensing into ice.

In severe cases, the shield inside the motor may break. If not replaced in time, leakage will occur, which can lead to serious personal safety accidents with serious consequences.

The heating probe is inserted or stuck on the water supply or return pipeline of the wall-hung boiler, first confirm whether it is an icing fault, to confirm that it is a fault, then you need to detect whether there is a problem with other parts of the wall-hung boiler, the wall-hung boiler will not cause freezing under normal use, the water will become ice, the volume will increase, confirm whether the pipeline interface is leaking. Then you can remove the heating probe and wipe it down to confirm that the heating probe fits the pipe. Basically, the heating probe and the probe are connected to the board interface or the board is faulty.

It is best to contact the after-sales service in case of the freezing failure of the heating probe of the wall-hung boiler.

Summary. Hello, the common faults of the wall-hung boiler thermostat are: 1. The temperature measurement is not accurate.

2. The wiring between the thermostat and the wall-hung boiler is abnormal.

3. The thermostat will run out of power.

The wall-hung boiler temperature controller is suitable for controlling the wall-hung boiler heating system. Its working principle is the thermal element on the thermostat, the resistance changes with the temperature, by detecting the room temperature and the comparison of the set temperature, when the resistance changes to a certain calibration value, the relay can switch the action, and the output controls the start and stop of the wall-hung boiler.

What are the common faults of wall-hung boiler thermostats?

Hello, the common faults of the wall-hung boiler thermostat are: 1. The temperature measurement is not accurate. 2. The wiring between the thermostat and the wall-hung boiler is abnormal. 3. The thermostat will run out of power.

The wall-hung boiler temperature controller is suitable for controlling the wall-hung boiler heating system. Its working principle is the thermal element on the thermostat, the resistance changes with the temperature, by detecting the room temperature and the comparison of the set temperature, when the resistance changes to a certain calibration value, the relay can switch the action, and the output controls the start and stop of the wall-hung boiler.

If you have a problem, you can check it carefully.

Sincerely answer every question for you! Best if you're satisfied! If you have any questions, please keep asking!

Have a great day! Happy every day

The heating probe is inserted or stuck on the water supply or return pipeline of the wall-hung boiler, first confirm whether it is an icing fault, to confirm that it is this fault, then you need to detect whether there is a problem with other parts of the wall-hung boiler, the wall-hung boiler will not cause freezing under normal use, the water will become ice, the volume will increase, confirm whether the pipeline interface is leaking. Then you can remove the heating probe, wipe it, and make sure that the heating probe fits the pipeline. The state head is basically the heating probe and the probe connecting the circuit board interface or the circuit board failure.

Do the math how much it will cost you to renovate your home

With the change of times, the wall-hung stove has become one of the items that countless buyers must buy when decorating their houses. However, when the wall-hung boiler sounds an alarm during use, many owners feel anxious and overwhelmed. So, what's the alarm of the wall-hung boiler?

How to choose a wall-hung boiler? Let's find out together!

1. What's the alarm of the wall-hung boiler?

The alarm of the wall-hung boiler indicates that it has failed. Generally, the reasons for the alarm of the wall-hung boiler are: the water pressure is not enough, the water shortage in the pipeline, the wind pressure of the fan is wrong, and so on.

If the water pressure is insufficient, a booster pump can be installed to solve the problem. To sell other problems, it is recommended that you have the best professional repair personnel to solve.

2. How to choose a wall-hung boiler?

1. Consider**.

When screening wall-hung boilers, the first thing we have to think about is our own economic situation. In fact, the wall-hung boilers on the market are already very good in terms of quality and technology. Therefore, when you are buying a wall-hung boiler, you can choose the right type according to your budget.

2. Choose a brand.

In recent years, there have been a dizzying number of brands of wall-hung boilers. Therefore, when you screen wall-hung boilers in shopping malls, it is best to choose a brand with a good reputation. Because the wall-hung boiler with a good reputation not only lasts longer, but also is more convenient.

3. Check the energy saving.

Since 2017, we have been calling on everyone to buy environmentally friendly and energy-saving wall-hung boilers. But it is precisely because of the call of ** that all kinds of wall-hung boilers on the market are now flocking to the market. And when we buy, we have to buy the type with high thermal efficiency, because such a wall-hung boiler is more energy-efficient and can save a lot of electricity bills for the family, so it kills two birds with one stone.

Enter the area and get the decoration for free**].

Enter the area and get the decoration for free**].

1. The temperature measurement is inaccurate, 2. The wiring between the thermostat and the wall-hung boiler is abnormal, and 3. The thermostat is out of power. That's all I know, and I hope it helps!

Generally the problem of incorrect temperature calibration, you can see if your thermostat is far away from the refrigerator, radiator, oven, window and aisle and other ventilated places, such areas will affect the temperature calibration.

The LCD of the switch thermostat is not displayed

The waterway alarm of the wall-hung boiler refers to the automatic alarm when the waterway failure of the wall-hung boiler occurs in the process of using the wall-hung boiler. In the process of normal operation of the wall-hung boiler, there may be many reasons for the occurrence of the waterway alarm.

First of all, the wall-hung boiler waterway alarm may be caused by the water pressure being too high or too low. When the water pressure is too high, the wall-hung boiler system will automatically alarm, which is usually caused by the failure of the pump, water pipe, or other waterway components. And when the water pressure is too low, the wall-hung boiler system will also give an alarm, which is usually caused by the failure of the water pressure gauge, the failure of the water pump, the leakage of the water channel, etc.

Secondly, the wall-hung boiler waterway alarm may also be caused by the waterway failure, such as the waterway blockage, waterway blockage and other problems. Some failures are usually caused by the wall-hung boiler waterway cleaning or filter replacement is not as good as the trapped potatoes or incorrectly.

In addition, the wall-hung boiler waterway alarm can also be caused by the failure of the water pump, the temperature of the waterway is too high or too low, etc. In the process of using the wall-hung boiler, if the temperature of the water channel is too high or too low, it will cause the system to fail, which will cause the water channel alarm.

In short, there may be many reasons for the alarm of the waterway of the wall-hung boiler, which needs to be investigated and dealt with according to the specific situation. In order to ensure the normal operation and use of the wall-hung boiler, it is recommended to carry out regular inspection and maintenance, clean the waterway, replace the filter, fill the water in time, etc. At the same time, when using the wall-hung boiler, it is necessary to pay attention to maintaining water pressure balance, normal temperature and other conditions, so as to reduce the occurrence of failures.