Who can share some maintenance methods for industrial air conditioners?

Because the purchase cost of industrial air conditioners is generally relatively high, the appropriate operation mode and correct maintenance are conducive to prolonging the service life of air conditioners. Before turning on the machine, you must do a comprehensive "diagnosis" to check whether there is a "problem" with the air conditioner to prevent unnecessary damage caused by improper operation; After shutting down, pay attention to the outdoor unit and indoor unit before the air conditioner is turned off.

The maintenance method of industrial air conditioner must first be cleaned regularly.

Now they have a lot of ways to maintain industrial air conditioners, and they must choose some regular institutions to maintain them, so that the air conditioners can last longer.

Hello, to be honest, we don't have a good maintenance of the industrial air conditioner. Are you saying that the air conditioner cleaning staff may come over to clean the air conditioner every year, and the rest of the time he doesn't pay attention to him.

1. Check the air conditioner plugs and sockets frequently.

When using the air conditioner, it is necessary to check the plug and socket of the air conditioner frequently, and check whether the power lead wire or plug is hot, which is not only for your own safety, but also an important means to extend the service life of the air conditioner.

2. Check the pipeline interface.

The water system of the air conditioner should pay attention to whether there will be water leakage in the place where the pipeline is connected, if such a phenomenon occurs, it should be dealt with in time, and if there are oil stains, it means that there is a refrigerant leakage, and it should be treated in time.

Air conditioning line interface.

3. Clean the filter regularly.

When using the air conditioner, be sure to clean the filter screen of the water system and air duct machine regularly, generally once every 2-3 weeks, and the cleaning should be thorough, the filter screen should be extracted, and then the dust on the filter screen should be removed with a dry soft brush, and then installed in the air conditioner after drying.

Summer is coming, air conditioning is a household appliance with a relatively high frequency of use, Xiaomei friendly suggestion, it is best to turn on the air conditioner in advance to test whether there is a fault, such as not opening or not refrigerating, etc., if you wait until the summer maintenance season to find a problem to make an appointment to queue, it is estimated that it will be extended indefinitely......

In fact, the maintenance method of industrial air conditioner should be cleaned regularly, checked regularly, and some common causes of failure should be eliminated.

I think industrial air conditioning and commercial air conditioning are almost the same, the principle is the same, the usual maintenance is mainly to clean the filter screen to check whether there is any abnormal noise when the air conditioner is running?

The maintenance method of industrial air conditioner, because the industrial dust is relatively large, so the filter element of the air conditioner is not connected to the circulation system and needs to be replaced in time, or tilted.

Hello, this suggestion for you for example, where to buy the air conditioner at home, you can ask their after-sales staff, and they will tell you how to maintain it.

The maintenance method of industrial air conditioner must be regularly cleaned and standardized maintenance and testing to achieve better operation results.

Who can share some maintenance methods for industrial air conditioners? In the case of industrial air conditioners, we must first understand some of its structures and types, and then follow the correct method to maintain them.

You can share some maintenance methods of industrial air conditioners, and the specific maintenance methods should be explained by after-sales personnel.

1.Remove debris from the ventsEnsure proper ventilation. Observe whether the outdoor rack is loose, and clean the outdoor ventilation grille for foreign objects. At the same time, keep the vents unobstructed.

2.Indoor and outdoor heat exchanger surface cleaning to improve the efficiency of the heat exchanger. When cleaning the indoor heat exchanger, you should carefully remove the panel, scrub it with a soft rag, and use a small brush to gently scrub the heat exchanger of the internal machine, so as to achieve the purpose of removing dust and harmful accumulation of multiplying germs.

However, it should be noted that since the heat sink is a thin aluminum material, it is easy to deform after being stressed, so it should be carefully brushed.

3.Wash the dirt on the filter. When cleaning the filter, first cut off the power supply, and then open the air inlet grille; Take out the filter, wash the filter with water or a vacuum cleaner, the water temperature should not exceed 40 degrees, wash it with a hot damp cloth or neutral detergent, and then wipe it with a dry cloth, and do not wash the filter with insecticides or other chemical detergents.

4.Wash the drain from dirt and buildup. The drainage part is prone to dirt deposits, so it must be thoroughly disinfected regularly to ensure smooth drainage and prevent bacteria from multiplying.

5.Check for others. Including power supply lines, plug boards, switches; Check the condition of consumable parts, such as air guide plate, sterilization and dehumidification, photocatalyst and other components, to ensure that the air conditioner is in good condition and there is no abnormality.

The home appliances that are bought back should not only be used reasonably, but also carefully maintained and maintained. If the daily maintenance is not done well enough, the use of household appliancesLifespanIt will be greatly shortened, and then it will be a toss for people to repair, until the replacement of new appliances, which is laborious and costly. To give full play to the role of household appliances, it is necessary to maintain more and take precautions in daily life.

The maintenance tips for air conditioners are as follows:

When installing the air conditioner, try to choose a shady room or the shady side of the room to avoid direct sunlight on the air conditioner. If it is only sunny to the sun, a sun shield should be added to the air conditioner.

Dust should be removed from the air conditioner's filter frequently, which can keep the air clean on the one hand, and keep the air circulation system smooth on the other hand, protect the air conditioner, and save electricity at the same time.

The shorter the connecting pipe between the indoor and outdoor units of the split air conditioner, the better, and the connecting pipe should also be insulated.

Regularly remove the dust on the radiator of the outdoor unit, because too much dust will increase the power consumption of the air conditioner, and in serious cases, it will also cause the compressor to overheat and the protector to trip, which will cause the air conditioner to stop working. The remote control must be kept in a dry place, not squeezed, and the battery should be removed when not in use.

To clean the plastic frame and metal shell of the air conditioner, a soft cloth should be dipped in water below 40 or neutral detergent, gently scrubbed, and then wiped dry with a soft cloth, avoid cleaning with corrosive liquid, so as not to damage the paint and make the plastic age.

When storing the air conditioner, you should choose sunny weather, so that the air conditioner is in a ventilated state (the compressor is not working), so that the moisture in the machine is fully removed, and then cut off the power supply. If possible, it's a good idea to keep your collected air conditioner running in ventilated conditions for a few hours each month.