Why did the letters I typed out become like this 5

A: In written documents.

We 1, such as word, notepad program:

Typing the keyboard is easy to build German :

First go to the Windows Control Panel (Control Panel), open the Region and Language options, and you can add a German keyboard. Set up the method of chemical industry, look at it and understand, no longer repeat.

Set up. In fact, if your keyboard is English, the German conversion goes into it because some of the keys in the text and the actual output of the letters are not the same, and you feel inconvenienced. The most interesting thing is that the y and z positions are just swapped.

For this purpose, unless writing a long masterpiece, you should try to take another way of writing as allowed. For example? = 阂,?

Oe, u = ue, ? = ss, etc. ****2：

If you have to write a letter in Germany, you can use the key combination:

alt + 142 =？

alt + 152 =？

alt + 154 = u

alt + 132 =？

alt + 148 =？

alt + 129 = u

alt + 225 =

2：？The German alphabet avoids pages caused by garbled characters.

You may wonder why I put these particular letters written here is not gibberish? In fact, you can also write, but with some trouble, you have to use a text program like Notepad.

Such as writing their work by special coding:?

u u other words, written? , write text programming on the page when in use: ?

You'll have to send a screenshot to see what it looks like.

There are two possible reasons for this: (excluding the use of software such as keystrokes).

1.The keyboard has been used for a long time, and the keys have a problem with consecutive clicks due to dirt. That is, the key is struck once, and it appears several times; Or tap a few times, appearing 1 time.

Solution: 1) If it is a membrane keyboard, this problem rarely occurs, but the keyboard can also be disassembled, and cleaned up for the keys and alcohol + soft cloth that have problems.

2) If it is a mechanical keyboard, it is most likely to have a combo problem, so it is recommended to pay attention to maintenance at ordinary times; You can remove the keycaps and blow vigorously with a straw under the axis to let the dust flow out with the air.

3) For non-smokers, you can add alcohol to rinse, do not use WD40; If the problem is still only to be dealt with by changing the shaft.

2.There may be a problem with the input method,Set up the Larry mode,Two keys can type a word,One on behalf of the initials and one on behalf of the finals,Now most of the pinyin input methods have Larry mode。

Solution:You just need to reset the input method attributes,Remove Larry mode。 If it doesn't work, reinstall the input method.

word becomes a letter when typing? If you find that the typed text has become a word scrolling mother when you are typing, it may be because you have misoperated a shortcut key on the keyboard, or because of the autocorrect function of Word. Here are some of the reasons that can cause this to happen and how to fix it:

1.Check your keyboard: Check to see if there's anything wrong with your keyboard, such as some keys are stuck or triggered by mistake.

If there is a problem, you can try to change the keyboard or restart the computer. 2.Check the input language:

If you use more than one input language, it may cause the input text to become letters. Please check that you are using the correct input language and switch to the correct input language. 3.

Turn off the autocorrect function: Word comes with the autocorrect function of Zen Balance, which will automatically convert certain words into other words or symbols when typing. If you don't need this feature, you can turn it off.

Select "File" -> Option ->Proofreading" in Word, and untick "Auto-correct spellings" and "Auto-formatting". 4.Restore default settings:

If none of the above methods can solve the problem, you can try to restore the default settings of Word. Select "File" in Word - > option "-> Resources" and click "Restore Default Settings for Word". Hopefully, the above methods can help you solve the problem.

You have the numeric keypad turned on. Because some keys have two characters on them, they can be used interchangeably.

Method: Turn off the keypad, use the FN+NUMLOCK number lock key, first press and hold the "FN" key, and then press "NUM LK" to switch the keypad.

Extended Materials. What should I do if I can't type on my laptop keyboard.

2. After finding it, right-click it. In the settings bar, pull the mouse arrow to the bottom, and left-click the mouse in the properties area.

3. After clicking on the properties, a control panel will appear, as shown in Figure 1 belowThen look at Figure 2, where I marked with the red arrow, and find "Device Manager".

4. Then, left-click to open the device manager, and the following figure appears.

5. In this device manager, we find the keyboard from top to bottom. Click on the small triangle in front of the keyboard first, and a sub-management will appear. Then click on the red line.

6. Finally, in the control panel that appears, first find "Driver", then click "Update Driver" below, and finally click "OK". (We mark on the diagram).

First you check if your copy keyboard is in good condition, and if it is in good condition, probably.

Is your input method has a problem,Maybe you set up Larry,You just need to click on the QQ Pinyin toolbox,Then click on the attribute settings,Then the basic settings in the "Pinyin mode" in the selection of the spelling and Larry mode, as long as you remove the Larry,Hook on the spelling,If it doesn't work,You just reinstall QQ Pinyin to try it,I wish you a pleasant day,Thank you for adopting!!

Microsoft's own input method,At present, the automatic error correction is turned off,It is currently working。

The specific method is the W8 system,Find and change the computer settings in the lower right corner,Enter the region and language,In the options of Microsoft input method,Turn off automatic error correction。

Microsoft system and Microsoft input method compatibility problems,I've also encountered,Give up Microsoft input method。 There is no problem with other input methods.

1. Inside the keyboard. There's dust and the like. The keyboard is inflexible. 2、That's Larry mode,Two keys can be played inside a Rong word,One on behalf of the initials and one on behalf of the finals,Now most of the pinyin input methods have a Larry mode。。

If you are satisfied with Ya's reply, please choose to adopt it, and we will be encouraged to better answer for other netizens, thank you.

Maybe it's because you accidentally touched a key.

This happens for the following reasons:

There is no input method installed.

The input method did not switch to Chinese input.

Accidentally pressed the shift key when Chinese input was selected.

The caps key is locked.

Solution: Reinstall an input method.

Select the Chinese input method.

The status of the Chinese input method was pressed and the shift key was pressed. Workaround: Press the shift key again.

The caps key is locked. Solution: Unlock the caps key and press the caps lock key.

Common problems and solutions when typing are as follows:

Problem: When typing with a notebook, sometimes you will suddenly find that you are typing letters but you are looking for numbers.

The cause of the issue: Unplugging the keyboard without unlocking it when pressing "numlock" while using an external keyboard.

Workaround:

Reconnect the external keypad and press the "Numlock" key to unlock the numpad lock.

Just look for the fn and [numlk] keys on your laptop keyboard.