How to adjust the channel of Konka TV, how to call up the TV channel of Konka network TV

In other words, as long as your TV is not using 9012 as a remote control, the electrical channel will be changed. The exact method varies from TV to TV. Older 50462 and 3010 are used to work with the native buttons, and sometimes they need to be stored individually with fine-tuning.

No matter what kind of TV it is, it takes a long time to arrange his channel number for personal preferences (some TVs take more than 10 minutes).

In fact, it is sometimes not meaningful to artificially modify the electric channel, because we will re-search the TV from time to time. In this way, the programs that were adjusted before are generally canceled.

The general method of adjusting the channel of Konka TV is as follows:

1. Insert the TV [program signal cable] into the [antenna signal input interface] of the TV;

2. Start the TV;

4. After entering the [Channel Search] interface, you will see the two options of [Manual Search] and [Automatic Search], select [Automatic Search], and press the [Confirm] button to start searching for TV channels;

Summary. 1. Insert the Konka TV program signal cable into the antenna signal input interface of the Konka TV, and start the power button of the Konka TV.

2. Through the remote control, you can also directly enter the TV menu by the menu button on the TV.

3. Find the search option on the main menu of Konka TV.

1. Insert the Konka TV program signal cable into the antenna signal input interface of the Konka TV, and start the power button of the Konka TV. 2. Through the remote control, you can also directly call the menu button bent on the TV to enter the TV menu. 3. Find the search option on the main menu of Konka TV.

4. Click the confirm button on the remote control of the sock chain hail on Konka TV to enter the channel search interface. 5. After entering the channel search interface, you will see two options: manual search and automatic search, select automatic search, and press the confirm button to start searching for TV channels. 6. Search and wait for a period of time, and after the operation is completed, the power channel can be called. Thank you.

1. Insert the Konka TV program signal cable (such as cable TV signal or satellite TV signal) into the antenna signal input interface of the TV; 2. Start Konka TV; 3. Use the remote control of the TV to operate, press the menu button, and in the menu options that pop up.

Hello! Konka network TV tunes out the channel,Mu model Konka TV can adjust the channel through the following steps**: 1、First insert the Konka TV program signal line (such as cable TV signal or satellite TV signal) into the antenna signal infusion interface of the TV; 2. Start Konka TV; 3. Use the remote control of the TV coder to operate, press the menu button, and in the pop-up menu options.

Find the channel search,Press the confirmation key to enter the channel search interface4、After entering the channel search interface,See the two options of manual land search and automatic search and dismantling and flushing,General air destroyer selects automatic search,Press the confirm key to start searching for TV program channels5、After the TV automatic search program channel is completed, it will return to the ** interface of the TV program,It means that the program search has been successful,So you can start to select**TV program。

2.Press the "Power" button on the remote control and the TV will turn on. 3.

Press the "Menu" button on the remote control and select "Channel Settings" or "Channel Search" in the menu interface. 4.Select "Automatic Search" or "Smart Rent Manual Search" to select the corresponding search method according to the different TV signals.

Press the "number key" or "channel + - button" on the remote control spine lifter to switch the electric ** channel. Note: If the TV signal of Xiaoye Zhaoguo is not good or there is interference, it may cause the searched TV channel to be unclear or unable to watch.

Konka TV channel tuning method:1Plug the Konka TV program signal cable into the antenna signal input interface of the Konka TV.

2.Through the remote control, the vertical closure can also be directly on the menu key on the TV to enter the TV menu. 3.

Wait for a while and you're done.

1.First of all, insert the signal cable of Konka TV into the antenna signal input interface of Konka TV, and start the power button of Konka TV.

2.With the remote control, you can also go directly to the TV menu via the menu key on the TV.