How Konka IPTV syncs with laptop display

The method is very simple, connect your laptop and TV with a VGA cable, and then right-click on the computer desktop - properties - settings, at this time, you will see two blue boxes marked with the numbers "1" "2", "1" represents your current main monitor (notebook), "2" represents the second screen you want to expand the display (Konka IP TV), left-click the box "2", then the "extend the Windows desktop to this monitor (E)" below becomes optional, You put a checkmark in the box in front of you, and you're good to go. Of course, you can also set the screen resolution appropriately according to the screen size of your TV, display pixels and other specifications, and the best display effect has been achieved. If it is set up as it is, it still does not show up on the TV screen, then restart the notebook (refresh) and it is OK.

Please ask the specific model of your TV,Konka TV can be connected to the computer through the VGA,HDMIinterface,Use as a computer monitor,You need to adjust the resolution of the computer to the permitted range of the TV,Adjust the refresh rate to60Hz,Switch the signal of the TV,Turn on the TV,Turn on the computer after using,Thank you for your consultation,I wish you a happy life!

It's too complicated for the wind and rainer.,What he's talking about is synchronous display.,Generally, it's the default dual display after connecting online.,If not, you can press fn+f (or win+p) to achieve screen switching。 But looking at the meaning of his question, it seems to be to achieve network synchronization,I don't know how to achieve all the network TV uses,But what software should be used。

According to the description, the case of this dual-screen display is extended mode, where the laptop and LCD TV screens together are a complete display screen. To make the laptop and LCD TV display the same full picture, you just need to change the display mode to copy.

Taking win10 notebook as an example, the detailed operation steps are as follows:

1. Click the notification icon in the lower right corner of the desktop.

2. Select Projection in the pop-up window.

3. Then select the copy mode among the four modes in the pop-up side window.

4. You can also directly bring up the window of step 3 directly with the shortcut key Win+P key that comes with the Windows system.

5. Then select Copy.

The method and detailed operation steps are as follows:

1. In the first step, turn off the computer and TV, see the figure below, go to the steps below.

<>5、The fifth step,After performing the above operations,Use the TV remote control to select the signal source,See the figure below,Go to the steps below。

6. The sixth step, after performing the above operations, the laptop and TV can be displayed synchronously, see the figure below. In this way, the problem is solved.

You set the external second screen of the display output to extended screen mode, right-click on the desktop, Properties, go to the display properties page, and change the output mode of the second screen to synchronous mode.

Hello, it is recommended to use the shortcut key win+p to switch, set to copy mode to make the screen and the external monitor display the same content.

Dear Konka users:

1. The resolution of the computer should be within the range of the TV (such as 1024*768, etc.);

2. The refresh rate of the computer should be 60Hz;

3. Turn on the TV first, put the TV on the computer, VGA, PC, HDMI (according to the dialog box pop-up in the remote control menu of the TV, different TVs display different computer signal sources, such as the TV menu has the option "computer" to select the computer) state, and then start the computer host to let the TV automatically identify the signal of the computer. (Note: Do not turn on the computer first and then turn on the TV, that may not have a picture);

4. Please connect a PC audio cable separately (a one-point cable, that is, a single-pin, pin-connected cable at both ends) as the output of the sound.