JCDecaux tile adhesive type 2 can be pasted with bricks

JCDecaux type 2 tile adhesive is mainly pasted with large bricks, 600*600 and 800*800 tiles can be pasted, if more than 800*800 tiles need to be pasted with the use of partners. Tile adhesive is recommended to choose Keshun home waterproof C300 reinforced tile adhesive, the tile adhesive is preferably cement, refined fine aggregate, and added polymer and a variety of special additives to formulate. The product has excellent water retention performance, which is more convenient and faster than traditional cement mortar construction.

The product has good adhesion to medium-sized tiles.

Precautions: 1. Before construction, the firmness, verticality and flatness of the base surface should be confirmed;

2. After the tile adhesive is scraped on the base surface, the pasting of the tile must be completed within the drying time;

3. After the tile is pasted, when it needs to be adjusted due to dislocation, it must be adjusted within the adjustment time to avoid affecting the strength;

4. The excess tile adhesive in the construction process should be removed before hardening;

5. Check the mortar layer on the back of the brick in time to ensure that there is no hollowing phenomenon, otherwise the slurry should be replenished in time;

6. This product is suitable for use in the environment of 5 -35, and it is forbidden to add water to stir the dried glue for reuse.

If you want to know more about tile adhesive, it is recommended to consult Keshun home waterproofing. Keshun Home Waterproof has the production capacity layout of the country's top ten production bases and a fast-response logistics service system. Through dealer channels, e-commerce channels, home improvement channels, etc., it covers the national market, provides one-stop home improvement auxiliary material solutions for thousands of households, and protects a better life for consumers.

Check out the future waterproof market dividends.

Tile adhesive type 2, that is, we often say strong tile adhesive, has stronger adhesion and can pave 600*600mm, 800*800mm these relatively large tiles, and whether it is full glaze, polished tiles, antique tiles and other types are no problem.

Here are the detailed construction steps:

1. Pour the porcelain sticker powder into clean water and stir it into a paste (mixing ratio: 20kg powder 6kg water), after stirring, it needs to stand still for about 10 minutes, and then stir slightly before use, which helps to increase the adhesion force.

2. Use a toothed scraper to apply the glue on the working surface to make it evenly distributed and form a toothed shape.

3. Knead the tiles on the top during the drying time.

There are three main differences between JCDecaux tile adhesive type 1 and type 2: stickiness, object of use and location of use.

1. Adhesion: First of all, the adhesion of the two types of tile adhesive has been improved, the adhesion performance of type 1 (strong type) is greatly improved compared with that of traditional cement mortar, and the adhesion of type 2 (super strong type is more than 2 times higher than that of cement.

2. Object: The size of the tile area for these two types of tile adhesive is not the same. Type 1 needles are fired on small tiles under 300 mm x 300 mm. Type 2, on the other hand, is aimed at large tiles of 300 mm x 300 mm or more.

3. Location: Type 1 tile adhesive is suitable for ceramic mosaic or glass products. Type 2 is used in a wide range of locations, such as stone paving, pavement construction, etc.

What should I pay attention to when using tile adhesive?

When pasting tiles with tile adhesive, you must remember not to add cement mortar to the tile adhesive. Tile adhesive is made of excellent liquid air cement and other materials, we only need to add appropriate water according to the product instructions to stir it evenly. If we add cement mortar to the tile adhesive, it will affect the bonding effect of the tile adhesive.

Can JCDecaux tile adhesive type 1 paste 400*800 wall tiles?

Hello, JCDecaux tile adhesive type 1 can be pasted with 400*800 wall tiles, JCDecaux type 1 tile adhesive can be pasted with wall tiles, not only strong and firm, stable and stable, no cracking, no falling off, no warping, no glue! Very strong and strong, stable and strong! Beautiful atmosphere!

The surface is smooth and delicate without flawless orange defects, the tile adhesive type is very good, it can be bonded and solidified in a short time, the fixation is particularly strong, the operation is simple, convenient and fast, and the ruler is economical and durable.

Can JCDecaux tile adhesive type 1 paste 400*800 wall tiles?

Can JCDecaux tile adhesive type 1 paste 400*800 wall tiles? Hello dear, 400*800mm specifications of ceramic tiles belong to the large trillion file Xun block tile, suitable for the use of type two adhesives, higher bonding strength, improve the quality of bonding. Precautions for tile construction 1

Before the tile is bonded, it must be brushed with adhesive, evenly coated, and paved after the adhesive strength is formed. Hope it helps!

Degao tile adhesive type 1 can not be pasted oh, normal are two types of JCDecaux type 2 tile adhesive is mainly pasted with large bricks, 600 * 600 and 800 * 800 tiles can be pasted, if more than 800 * 800 tiles are needed to be pasted with the partner. Generally, the tiles on the wall of the beam yard can be pasted with slag. If my answer is helpful to you, I look forward to your like, your efforts are important to me, and your support is also the driving force for my progress.

If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a happy mood!

A bag of 20 kg tile adhesive can be paved squarely. No. 3 tile adhesive has large adhesion, more flexibility, can resist the stress caused by thermal expansion and contraction of the adhesive layer, and is suitable for pasting tiles on gypsum board, fiberboard, plywood or old finishes (tiles, mosaics, terrazzo), etc., as well as the adhesive bending of various stone slabs of larger sizes. In addition to gray, tile adhesive can also be provided with a white appearance of the remaining band, vertical reed is suitable for light or translucent marble, tile and other natural stone.

1. Different performances.

Compared with traditional cement mortar, the performance of JC tile adhesive TTBI (strong type) has been significantly improved; JC tile adhesive TTBII (super strong type) has more than twice the reinforcing power of cement.

2. The applicable position is different.

JC tile adhesive TTBI (strong type) can be used to paste ordinary tiles, ceramic mosaics, small natural stones, clay tiles; Suitable for floor or interior wall paving; JC tile adhesive TTBII (super strength) is suitable for pavement size less than 600x600mm, ordinary marble, natural stone and all kinds of ceramic tiles with greater water absorption.

3. Different effects of additives.

JC tile adhesive TTBI (strong) and JC tile adhesive mate (DL) are less effective; JC Tile Adhesive TTBII (Extra Strong) and JC Tile Adhesive Mate (DL) additives do not work well. Better yet, you can stick the tile on the tile, i.e., on the tile.