What should be paid attention to when using JCDecaux tile adhesive

1. During the construction period and within one day of completion, the base and ambient temperature should be 5 35, and the materials that have just been constructed should be avoided from drenching for a day.

2. This product shall not be diluted with water and mixed with any other substances, and the mixed materials shall be used up within the specified time, and shall not be mixed and used again after overtime.

3. After the construction is completed, maintenance and protection should be done to prevent pollution, collision and damage.

4. This product should be stored in a cool and dry environment to avoid moisture and rain.

5. The storage temperature is 5 40, and the storage period is about 6 months.

Tile adhesive is an adhesive material directly painted on the back of the tile, which can effectively improve the bonding strength between the tile and the adhesive material, and solve the common hollowing and falling off problems in the wet paste of the tile.

Tile adhesive is made of high-quality polymer emulsion material and inorganic silicate composite products, ceramic tile adhesive can be used in combination with a variety of adhesive materials to form a ceramic tile paste system, greatly improve the adhesive force of ceramic tile and base layer, ceramic tile adhesive has good performance in standard concrete slabs and glazed tiles, and the safety performance is greatly improved. It is specially used for the back treatment of wet vitrified bricks, which can effectively improve the bond strength between vitrified tiles and adhesive materials, and solve the common hollowing and falling off problems in wet pasting of vitrified tiles. It is also suitable for the back treatment of stone and other bricks with low water absorption, dense texture and smooth surface.

Precautions for the use of tile adhesive.

1. The construction temperature is 5 35, and it is not suitable for construction in dusty and rainy weather;

2. The base surface should be kept clean and firm, free of dust, oil, batik, etc.;

3. Keep the knot surface clean and dry, avoid working in rainy days, avoid tile pasting in a humid environment, and try to keep the environment dry;

4. Add water uselessly, open the barrel and stir evenly before using it directly;

5. After painting on the back of the tile, it is necessary to wait for the coating film to become transparent before applying cement mortar or other adhesive materials for paving;

6. When pasting tiles, ensure that the tiles and mortar are tightly attached to avoid hollowing;

7. Pay attention to the protection of finished products to avoid damage caused by subsequent construction operations.

How to use, convenient and simple.

1. JCDecaux vitrified brick adhesive is a two-component brick back interface agent. Powder + water agent is stirred evenly according to the ratio, and the ash knife is thinly coated to the back of the brick, and the tile adhesive can be directly applied to the brick.

2. The specific construction method is: the first step is to completely remove the dust, oil, release agent, etc. on the back of the brick. In the second step, add 16kg of powder to 4kg of emulsion, and use an electric mixer to fully stir, and no cement, sand, water and other substances can be added.

The third step is to scrape the adhesive batch to the back of the brick with a gray knife, with a thickness of about 1 mm, and there is no need to wait for drying. The fourth step is to use tile adhesive for thin tiling.

Precautions for the use of tile adhesive (also called tile adhesive):

1. Workers generally do not add water and stir according to the specified ratio, resulting in the binder being too thick or too thin, and cannot achieve good construction and pasting effects. This will lead to quality problems, so be sure to use it according to the manufacturer's product instructions. Some engineering experts have told the staff that some workers add cement, sand and rubber powder to the binder without permission, which destroys the proportion of the original formula, and the binder will fail or fail to achieve the original paste effect.

2. When the flatness of the wall does not meet the requirements, the workers do not level it in advance, and directly add it to the amount of binder for "thick paste", and the uneven wall is one of the reasons for the hollowing of the tile. The correct way is to level the wall, the flatness should be less than 3mm, and the thickness of the tile adhesive paste is 3-8mm, and the thickness of the paste should not exceed 8mm.

3. When workers use the thin paste method to pave, they often do not need to knead the tiles, thinking that only the tile surface can be neat, which can easily lead to the effect of the back of the tile not reaching the full paste. The correct practice is to check the degree of adhesive pasting on the back at any time, and reasonably choose the spatula and carding angle.

Compared with the traditional cement mortar, the use of ceramic tile adhesive is better, it has high bonding strength, water resistance, freeze-thaw resistance, aging resistance, and convenient construction. If you want to find a more cost-effective tile adhesive, it is recommended that Degao and Lou Gujia have good quality, I hope this can help you.

Do you need to sprinkle water on the wall when you put the exterior tiles?

The precautions for the use of tile adhesive are generally similar, and the base surface should be clean and free of dust.

There is no dust, release agent, etc. on the back of the tile.

After the adhesive is dry, it can be tiled with cement mortar.

Construction is not possible in extreme weather such as rain or snow.

Degao has never used it, and I have always used the adhesive of the Lougu brand for decoration.

I'm sorry, I haven't used Degao, I use Lougu, I don't know if it will help you.

Precautions for the use of tile adhesive.

1. The construction temperature is 5 35, and it is not suitable for construction in dusty and rainy weather;

2. The base surface should be kept clean and firm, free of dust, oil, batik, etc.;

3. Keep the knot surface clean and dry, avoid working in rainy days, avoid tile pasting in a humid environment, and try to keep the environment dry;

4. When used for tiling, attention should be paid to the cleaning of the base surface (such as brick back and wall), and the brick back should be brushed with glue at least twice to achieve full coverage;

5. It is strictly forbidden to mix other materials and dilute with water.

Base surface preparation: The base surface should be clean, no loosening, no grease, wax and other organic matter covering, such as the base surface is dry, first wet the base surface with water, the back of the brick should be clean, and there can be no other non-brick substance covering. If there is, it should be cleared.

If it is a brick with high water absorption, it should also be moistened with water to remove open water during construction.

Brushing: Brush or roller directly on the back of the brick, leave the edge when brushing to prevent the liquid from flowing to the brick surface, the thickness of the brush is 1mm, and then use ordinary Portland cement wet paste construction when it is dried into a translucent package.

Dosage reference: 1 kg brush 10 square meters.

But this is not Degao, I haven't used Degao, only Lougu.

Precautions for the use of adhesive for the use of floor solid tiles: first, the base surface needs to be cleaned, the second needs to wet the wall before tiling, and third, uniform cement mortar is needed when tiling.

Summary. Dear, hello, I am glad to answer for you whether the degao tile adhesive is good or strong.

Answer: JCDecaux tile adhesive is good for the whole school.

The appearance is different from the inside. The super strong tile adhesive is designed in red and blue packaging barrels, while the strong ceramic tile adhesive is designed in red and orange packaging barrels. JCDecaux super strong tile adhesive emulsion is blue, JCDecaux strong tile adhesive emulsion is milky white, relatively speaking, blue adhesive is more conducive to the construction and acceptance of tiling masters, reducing the occurrence of missing brushing.

Be careful. JCDecaux tile adhesive is good or strong.

Dear, hello, I am glad to answer for you Degao ceramic tile adhesive full effect or strong good Answer: Degao ceramic tile adhesive school good outer section of the rock banquet is different from the internal appearance. The super strong tile adhesive is designed in red and blue packaging barrels, while the strong ceramic tile adhesive is designed in red and orange packaging barrels.

JCDecaux super strong tile adhesive emulsion is blue, JCDecaux strong tile back emulsion is milky white, relatively speaking, blue jujube potato adhesive is more conducive to the construction of tiling master and check the silver collection, reducing the occurrence of missing brushing. Be careful.

One is low water absorption vitrified bricks.

The second is the all-effect water-resistant type, which is better.

Kiss the all-effect water-resistant type with a good one.

Summary. Which is better between the old stubborn tile adhesive and the JCAUX tile adhesive? JCDecaux tile adhesive is better, JCDecaux currently sells large and has a good reputation, you give different adhesive ingredients are certainly not reciprocal, mainly depending on the master's habits, JCDecaux tile adhesive is relatively speaking, word of mouth, sales, credibility are better, but tile adhesive is the interface treatment agent on the back of the tile, not the main material of the tile, pay attention to it!

Degao tile adhesive is better, its temperature resistance, weather resistance, water resistance, aging resistance are relatively good.

Which is better between the old stubborn tile adhesive and the JCAUX tile adhesive? Degao tile adhesive is better, Degao is currently selling large and has a good reputation, you give different glue ingredients are certainly not equal, mainly depending on the master's habits, Degao tile adhesive is relatively speaking, word of mouth, sales, credibility are better, but Zhongqi tile adhesive is the interface treatment agent on the back of the tile, not the main material of the tile, pay attention to it! "Degao tile adhesive is better, its temperature resistance, weather resistance, early water and land resistance, aging resistance are relatively good.

1.The old stubborn tile adhesive is a second-tier brand ruler Zen early. 2.

Is the old stubborn tile adhesive good: The old stubborn industry **** is a company integrating R&D, manufacturing, sales and technical services, focusing on providing overall solutions for high-quality building auxiliary material systems for Keling birds.

A construction temperature is kept between 5 and 35 degrees. No construction in dusty weather, rainy weather. The second base surface is kept clean, firm, no dust, no oil stains, etc.

Three. Keep the knot surface dry and smooth. Four.

No need to add water, open the bucket and stir well. Sun Naiwu. After the back of the porcelain is brushed with glue, the cement mortar can be smeared when the glue film becomes transparent.

Six. Paste the bricks to fit tightly.

Summary. Yes, but it is not recommended to use adhesive when laying tiles on the outside of the wall. Because the adhesive belongs to the pure rubber category, compared with cement mortar, the weather resistance of the adhesive is not very good, so it is recommended that you use cement mortar to pave the tiles outside the wall, and you can also use a special tile adhesive for paving.

Hello. Yes, but it is not recommended to use adhesive when laying tiles on the outside of the wall. Because the adhesive belongs to the pure glue category, compared with cement mortar, the weather resistance of the adhesive is not very good, so it is recommended that you use cement mortar to pave the porcelain Bi Xun brick outside the wall, and you can also use a special tile adhesive pants spike knot to pave Hu Shubu.

That's the case for me. The exterior walls used to be bricked, and now they have to be painted. Can I brush the adhesive?

Yes, yes, but not recommended.

The adhesive is not as easy to use as cement mortar.

If you use adhesive, it is best not to use it outdoors.

First of all, the tile adhesive is the back treatment agent of the tile, and the main material of the tile has to be the tile adhesive, and the adhesive is only used to deal with the auxiliary material of the tile hand and the filial piety surface; Secondly, this product should be used for indoor walls and floors, if it is used outdoors, wind and rain, the performance of the product may not be enough.

Which is better between the old stubborn tile adhesive and the JCAUX tile adhesive? : If you have a good budget for Degao, you can choose Dermaco, Nippon quality can also meet the needs of home decoration. Nippon Paint and Degao are both big brands, but the areas of expertise of the two are slightly different, Nippon Paint is mainly based on paint and coatings, Degao is based on dry mortar, and ceramic tile adhesive belongs to the field of dry mortar, so relatively speaking, Degao tile adhesive is better, after all, there is a specialization in the industry.

JCDecaux: Tile adhesive is the first choice in the market, and he also has ceramic tile adhesive. JCDecaux is also a leader in the field of waterproofing, and has participated in the compilation of national standards such as Chinese ceramic tile adhesives and cement-based waterproof coatings.