How to connect the mini bluetooth adapter and bluetooth headset to listen to songs?

Upstairs is too complicated, and at first glance it was copied from somewhere else.

In fact, the reason is very simple, that is, you are not matched.

I guess you haven't read the instructions of the headphones properly!

First, turn on the pairing function of the earphone (see the earphone manual for details), and then search with the software - right-click to search for the earphone icon - pairing - enter the password (see the earphone manual for details) - right-click the earphone icon again - refresh the service - connect.

At this time, the earphone will prompt "**" access, press the turn button of the earphone to use.

1.In the Control Panel - Hardware & Sound - Select Add Device - Add Bluetooth Device.

2.Tap the Bluetooth icon in the lower right corner of the system and select "Add Device". Select the Bluetooth headset you want to add, and you will be prompted that it is connecting with a Bluetooth adapter.

3.Then it prompts to add successfully, click "Start" - "Devices and Printers", and you can see the added Bluetooth headphones.

4. Right-click on the Bluetooth headset, select "Properties", select "Service" in the pop-up window, and check the option of the headset, then you can use the Bluetooth headset. Turn on the ** device and other devices to use the headphones normally.

When the earbuds have just been bought and have not been connected to other devices, they will generally automatically enter the pairing state when they are turned on. If you need to connect with a device other than the device you just successfully connected, you need to manually make it enter the pairing state.

Different headphones have different ways to enter. If your headphones only have one button, then after powering off, press and hold the function key until the indicator light is always on, which is the pairing state. If there are multiple keys with separate function keys and power buttons, then after powering on, press and hold the function keys until the light is always on.

Of course, some headphones don't use always-on to indicate the pairing status, so you should pay attention to it yourself. And the above operation method is only a more common way, and it cannot represent everything.

After the earphones enter the pairing state, the mobile phone turns on Bluetooth, searches for the earphones, pairs, connects, if you need a password, it is generally 0000, and there may be no password, but this kind of mobile phone and earphone Bluetooth protocol are both versions or above.

The Bluetooth adapter is an interface converter for various digital products that can be used for Bluetooth devices.

The Bluetooth adapter is connected to the Bluetooth headset as follows:

3.Come out and add the Bluetooth setup wizard window.

5.Turn on the Bluetooth of the mobile phone, and this Bluetooth will be able to search for peripheral Bluetooth devices.

6.Set the pairing Bluetooth password, you can also set it without it, and let the system automatically generate the key.

7.The system will automatically generate a key, enter this numeric password into the mobile phone, and the pairing can be successful.

The first thing to see if your Bluetooth adapter supports the current Bluetooth headset. Some are unsupported, so it's best to make sure first.

Requires a software ivt bluesoleil File size: