How to set up bluetooth headphones, how to set up bluetooth headphones

Tap your phone to turn on Bluetooth.

Taking the iPhone 8 mobile phone as an example, the method of setting the scum is as follows:

First, click "Settings" on the desktop of your phone.

2. After entering the settings interface, select the "General" option.

3. Then find the "Accessibility" item and click to enter the beam fiber.

Fourth, after entering, open the "audio call mode" item to enter.

5. Then check the "Bluetooth headset" item.

The Bluetooth headset can be used after normal matching and connection, and the matching connection method is as follows:

1. Under normal circumstances, when the Bluetooth headset enters the pairing state, you only need to keep holding the power button for about 10 seconds and don't let go, and the headset will change from off to on.

Then turn to the pairing state, which appears as a headset indicator (solid on). Then search for the Bluetooth settings with your phone, and you can find the headphones. For example: wep200, wep310, bh980, bh320

BH330 and so on.

2. The factory settings of some headphones are more complicated, such as the HBH-602 HBH608 of Sony Ericsson

HBH610A and Nokia's HS-36W, etc. 602 When the code is matched, you should first turn on the earphone, and then press and hold the +, - sign at the same time for about 10 seconds, then the indicator light will flash red and green alternately, so that you can use your mobile phone to search for Bluetooth devices. 36w is after the earbuds are turned on, press and hold the power button and the + sign at the same time for about 10 seconds, and the other steps are the same as ordinary earphones.

3. After the earphones enter the pairing, the mobile phone should search for Bluetooth devices, and the general mobile phone can search for the earphones in about 5 seconds, and then select the Bluetooth headset you find on the mobile phone, and the mobile phone will prompt you to enter the password. Most of the mobile phone passwords are 0000 or 1234, but there are some that are specially set by the manufacturer, and there will be a detailed record in the earphone manual.

4. When the mobile phone searches for the headset, and at the same time, after entering the password correctly, it does not mean that the mobile phone can use the Bluetooth headset to answer**. Now the finger bucket in many mobile phones in the Bluetooth device after the need to connect with the headset, if the phone is not connected to the headset in the settings, or can not answer**. Of course, there are also mobile phones such as Motorola's V3, there is no need to connect the headphones, as long as the pairing is successful, the mobile phone will connect the headphones very intelligently.

Summary. Hello, 1.

To make the Bluetooth headset in the power-on state, you need to press and hold the on/off key of the Bluetooth headset;

Until the indicator flashes blue and red alternately, then release.

At this time, the Bluetooth headset and the mobile phone will enter a matching state;

After the Bluetooth headset is displayed on the phone, click OK to connect;

After the mobile phone and the Bluetooth headset are successfully matched, the sound of the mobile phone will come out through the Bluetooth headset.

Set up Bluetooth headphones.

Hello, I have received your question, and I will answer it for you immediately!

Open the lid. This has a flashing headset on one side.

What's going on on with the other side not flashing.

Hello, 1.Turn on the Bluetooth function on the mobile phone, go in and search for the status of the blue Huai Kaiya earphones; 2.To make the Bluetooth headset in the state of opening and calling, you need to press the on/off key of the Bluetooth headset; 3.

Until the indicator flashes blue and red alternately, then release. 4.At this time, the Bluetooth headset and the mobile phone will enter a matching state; 5.

After the Bluetooth headset is displayed on the phone, click OK to connect; 6.After the mobile phone and the Bluetooth headset are successfully matched, the sound of the mobile phone will come out through the Bluetooth headset.

The other side didn't respond no matter how you got it, only one side could be connected.

Hello, if this situation exists and you can't connect all the time, you can go to the Bluetooth headset repair center for repair.

1. Under normal circumstances, when the Bluetooth headset enters the pairing state, you only need to keep holding the power button for about 10 seconds and don't let go, and the headset will change from off to on and then to pairing, which is manifested as the headset indicator (color change flashing). Then use your phone to search for Bluetooth settings, and you can find your headphones.

2. After the earphones enter the pairing, the mobile phone should search for Bluetooth devices, generally the mobile phone can search for the earphones in about 5 seconds, and then select the Bluetooth headset device you find on the mobile phone, and the mobile phone will prompt you to enter the password. Most of the mobile phone passwords are 0000 or 1234, but there are some that are specially set by the manufacturer, and there will be a detailed record in your earphone manual.

3. When the mobile phone searches for the headset and you enter the password correctly, it does not mean that your mobile phone can use the Bluetooth headset to answer**. Nowadays, many mobile phones still need to connect with the headphones after finding the Bluetooth device, if your phone is not connected to the headphones in the settings, it still can't be answered**. Of course, there are also mobile phones such as Motorola's V3, you don't need to connect the headphones separately, as long as the pairing is successful, the phone will connect the headphones very intelligently.

Pairing steps: Turn on the phone and select the Find Bluetooth device option (refer to the phone manual). Bluetooth Headset Step 1:

Press and hold the call button for about 8 seconds until the light stays on or flashes alternately, then release your hand. You'll hear a chime. (This method is the most popular, suitable for WEP150, WEP200, HS820, H500, Hw, HT820, C4, V3, etc.) Bluetooth headset step 2:

Press and hold the call button for about 5 seconds, and then press and hold the number button until the indicator light stays on, then release your hand. You'll hear a chime. (This method works for 36W) Bluetooth headset Step 3:

Fold the microphone and press and hold the call button for about 8 seconds until the light stays on, then release your hand and finally turn on the microphone. You'll hear a chime. (This method is suitable for foldable Bluetooth headset HS850, H700) Bluetooth headset Step 4:

Press and hold the call button for about 5 seconds, and then press and hold the and number keys until the indicator flashes alternately, then release your hand. You'll hear a chime. (This method is suitable for HBH602) The above 4 methods are used in most Bluetooth headsets Once the mobile phone finds the Bluetooth headset, there will be a prompt message:

Bluetooth". Follow your phone's prompts to pair. The pairing code (the password that your phone prompts you to enter) for this Bluetooth headset is 0000.

When pairing is complete, the indicator will turn green and the interval will flash at the same time. If you don't pair or are not in pairing mode within 3 minutes, the earbuds will automatically turn off. To pair, you must turn it back on and then enter the pairing state.