When you connect to a common mobile phone hotspot, you can t see it when you create a local game whe

The two mobile phones even hotspot game new system are pushed in order to fix some bugs and enhance the performance of the mobile phone, and different versions of the system have different pertinence, such as some versions are optimized battery life, some versions are optimized for fluency, and some versions are optimized for security. It is still necessary to update the system, generally speaking, the new system is to fix some bugs, enhance the performance of the mobile phone and push, different versions of the system have different pertinence, such as some versions are optimized battery life, some versions are optimized fluency, and some versions are optimized security. It is still necessary to update the system, generally speaking, the new system is to fix some bugs, enhance the performance of the mobile phone and push, different versions of the system have different pertinence, such as some versions are optimized battery life, some versions are optimized fluency, and some versions are optimized security.

You see, in the past year, the S system has always started with users, and through system upgrades, the user's mobile phone has been downclocked. After that, the battery is abnormally draining and the system slows down. So should the phone be upgraded?

Will the phone become stuck after the system upgrade? Will it drain faster than it did before the upgrade?

Yes, I too, don't know why!

Hello. It is recommended to use win7 to set up a LAN in the dormitory by yourself.

Here's the link that should be simple.

Second, please make sure that the war3 version is the same.

Please make sure that each computer is in the same IP zone.

For example, xx should be different, and others should be the same.

Have your own wireless router?

If there is a direct connection, if the dormitory is too far away, then - no way - -

Just refresh it, remember.

IP address problem,IP often occurs if you engage in automatic acquisition,You are connected to the network,Local connection,And then click on the protocol in the property,It's changed there,Upstairs has finished telling you,The rest have to ask other guys in your LAN their IP,I don't know what the IP is。

First of all, you need to turn off the window firewall of the machine, the specific operation is in the control page, find the window firewall and select close after opening;

Secondly, your IP address should be in the same gateway as other friends in your LAN, the same computer group, the specific operation is, in the IP attribute, if it is automatically obtained IP, check the status, and then manually set, for example, the IP of the host is then you are, and so on;

Again,Your version of the Warcraft game needs to be the same as the version of the host builder.,The specific operation is,Let the friend who sees the host open the game interface.,There's a game version code in the lower left corner.,If it's the same as yours, it's OK.,Copy one back.。

1.Turn off your window firewall, find the window firewall in the control panel, and select disable.

2.Your version of the game and the version of the map you're playing should be the same as the version of the host builder.

3.If that doesn't work, turn off the antivirus software's built-in firewall.

4.If it doesn't work, it's a network problem.

That's not refreshed.,Retreat and re-advance.,If it doesn't work, it's a problem with the version.,Patch it yourself.,And have you opened the battle platform?

How to set up a wifi hotspot on a notebook:

1. First of all, confirm that the wireless network card can be used, find "All Programs" in the start menu - Accessories - Command Prompt", and right-click "Run as administrator";

2. Enter "netsh wlan set hostednetwork mode=allow ssid=test key=0123456789" in the "command prompt", press enter, and the system will automatically create a wifi hotspot;

3. Open the Network and Sharing Center, click "Change Adapter Settings" on the left, and you will see that there is an extra network card;

4. Right-click on the local connection and click "Properties".

5. Switch to "Share", tick the box in the first box, and select "Wireless Connection*" in the selection box below, OK;

6. Also type "netsh wlan start hostednetwork" in the command prompt, press enter, and the wifi hotspot will be turned on;

7. Enter "netsh wlan stop hostednetwork" in the command prompt, press enter, and the wifi hotspot will be turned off.

Yes, but how much traffic do you have to drive? It's spicy to say that there are too many computers.

It depends on how many G networks you have. 3G doesn't work.

The simplest, most effective and cost-effective way is to clean the CPU cooler's fan with a brush and a leather tiger, which can effectively improve the cooling performance of the processor after the cleaning is completed.

What to do if the CPU temperature is too high.

What to do if the CPU temperature is too high.

2. Cleaning the fan is a matter that requires patience, and the dead corner of the fan is not particularly easy to clean, combined with the skin tiger, even the brush and then blow, I believe that only patience, the dust will soon go away, this trick can significantly improve the CPU heat dissipation capacity to a certain extent.

3 There is no technical content in cleaning the CPU fan by ourselves, the tools we use are nothing more than brushes and leather tigers, after we patiently and repeatedly clean, the original dirty radiator will also become new. This will result in a noticeable improvement in the heat dissipation performance of the radiator and a corresponding reduction in noise. For the cleaning of each board of the chassis, you should always have a small brush and leather tiger at hand, and it is more reasonable to clean it once every six months or so.

What to do if the CPU temperature is too high.

What to do if the CPU temperature is too high.

Second, reapply thermal grease.

1Sometimes, when the CPU temperature is not significantly improved after cleaning the CPU cooling fan, then we also need to re-apply thermal grease to the CPU, which will become dry and crack due to the longer use time, which will reduce the performance of heat conduction. Reapply thermal grease to allow the processor and heatsink to be tightly bonded to fully remove the heat from the CPU. In the application process, it should be noted that the thermal grease needs to be applied evenly to avoid uneven application and bubbles.

2. It is recommended that you use some professional gadgets to evenly coat the heat dissipation surface of the CPU with silicone, as shown below, which is our more commonly used CPU smearing tool, which is easy to buy in the computer city.

What to do if the CPU temperature is too high.

3. No matter what kind of air-cooled radiator, applying thermal grease is a very necessary homework. Only by applying thermal grease can all the heat of the CPU be transferred to the heatsink to ensure that the processor works within the normal temperature. At present, there is already a silicone-grease-free radiator, the radiator has been evenly smeared on the contact surface of the radiator and the CPU by the manufacturer when it leaves the factory, and after the machine is running, the heating of the CPU will evenly apply the thermal grease, which is very convenient and humane.

What to do if the CPU temperature is too high.

Third, combine the above two methods and then replace the cooling fan with a larger diameter.

If the CPU heat dissipation improvement in the above method is not very large, it is recommended to replace the cooling fan with a larger diameter. Replace the air-cooled radiator with a larger diameter and spend less on the upgrade budget; In addition, if the user has high requirements for heat dissipation, we recommend that you can also use some high-end heat dissipation configurations: water cooling and heat dissipation, which will also be the ultimate solution to solve the high CPU temperature.

Yes, if you play LAN connection, you can play with both machines connected, and if you play World of Warcraft, the mobile phone network speed must be fast enough.

Yes, take a laptop and connect it to a hotspot on your phone.

Try turning off your firewall or computer protection software, and the only thing that could be a problem is that the LAN is not connected or the game version is wrong.

This problem all appears in win7 and my dormitory has three ways to disconnect the broadband connection It is absolutely visible, and then connect to the broadband connection It doesn't matter. (The most convenient and simple way) 2 In the network settings, the wireless network card right click Attribute TVP IP4 Advanced Automatic hop Modify to 1 Don't check (because the network you connect to the broadband is the external network, the network you connect wirelessly is the intranet, the network connection order of the computer is first through the hop low, and then through the hop high, then as long as the hop in your wireless connection is lower than the hop in your broadband connection, it is generally automatic, you change the manual in the wireless connection to 1, the computer is the first to go through the intranet, Then you'll be able to see the host).

3 The next tool that can choose the network card For example, the flying pigeon book can choose your LAN IP (and the choice of hop should be a reason, mandatory to go to the intranet first.) ）

4 Go to the Internet to get patched, I haven't used it, but some people say it's feasible.

This is the method we use in our dorm room, and we hope it will help you.

Take a look at the firewall, turn it off, and install an IPX protocol.

If you can't see the other party, you can't see that the other party is not in the same LAN or because their wireless network cards are different.