There s no problem with the data cable, but it just can t rush in

First of all, if you are sure that there is no problem with the data cable, you can change the phone to flush it. If you still can't rush into the charge, then try another charging head. If it can rush into the power, it means that the charging head is broken and has to be replaced!

If you still can't charge it, it means that your previous judgment is wrong, and the data cable is bad.

The data cable is not broken, but it does not power up, so it is easy to repair.

1 .First check whether the charging interface at the bottom of the mobile phone is in good contact with the data cable, if the contact is not good, it will not be able to charge, and you can also check whether there is a foreign object blocked in the interface at the bottom of the mobile phone, which leads to poor contact with the data cable from Honghui. 2 .

Try to replace the power cord or data cable, it may be a fault of the data cable or the charging of the electrical appliance, and replace them separately to identify what the problem is. 3 .If the above methods are not carried as follows, it is recommended to turn it on again after shutting down.

The reason why a cable is plugged in but cannot be charged is that the internal wires of the cable may break, the cable connector may be loose or damaged, and the connector and jack of the cable may have dust or dirt.

1. The internal wire of the data cable may be broken: when the wire is broken, the power will not be transmitted from the charger to the device, resulting in the device being unable to be charged.

2. The connector of the data cable may be loose or damaged: If the connector connecting the charger and the device is loose or damaged, the power cannot be transmitted stably, and the charging will be interrupted or unable to be charged.

3. There may be dust or dirt on the connector and jack of the data cable: these dirt will reduce the transmission efficiency of low power transmission of Hexian fiber, resulting in slower charging speed or no charging.

Precautions for charging mobile phones

1. Do not use inferior chargers.

Inferior chargers may have problems such as unstable voltage, excessive current, and excessive charging speed, which will cause serious damage to the phone's battery and may even lead to the battery**. In order to ensure the safety of mobile phone charging, we should buy a regular brand charger and avoid using a charger from an unknown source that is too low.

2. Don't overcharge your phone.

Some people think that the longer the charger, the better, and use it until it is 100% used before unplugging, but this is a misconception. Lithium batteries for mobile phones usually stop charging automatically when they are fully charged, so overcharging is not only not beneficial, but may reduce the life of the battery significantly. Generally speaking, when the phone battery reaches about 80%, you can unplug the charger.

3. Avoid using your mobile phone while charging.

When the mobile phone is charging, the use of the mobile phone will cause the mobile phone to heat up faster, because at this time the mobile phone circuit board and battery are working, and the charger will also heat up due to excessive current, double heating can easily cause the mobile phone to overheat. Overheating may cause your phone's battery life to be shortened or even damage to the hardware parts inside your phone. Therefore, we should develop a good habit of not using the mobile phone when we receive it for charging.

Either the data cable is damaged, or the charging head is damaged, it is recommended to change the data cable or change the charging head to try it.

Summary. Here are a few ways to fix the problem of not being able to rush into the electricity:1

Replace the cable or device port. If the data cable or device port is found to be damaged, the user needs to replace them in time. This will help the user to use the device normally and ensure that the data cable is charged and data is transferred properly.

2.Check if there is a problem with the device system. If the device system fails, the user needs to check and fix the problem.

Users can try restarting the device or updating the device system to resolve the failure. 3.Check that the power supply** is working properly.

If there is a problem with the power supply, the user needs to check that the power supply is working properly. Users can try replacing the power supply** or check if the power cord is damaged.

Hello, I'm asking Teacher Seven, a digital talent.

Here are a few reasons why a data cable may not be able to rush into power:1The device port is damaged.

The device port may be damaged due to prolonged use or improper plugging and unplugging of the cable. If the device port is damaged, the data cable will not be able to connect to the device normally, and the power will be solved, so it will not be able to charge or transmit data. Poor eggplant ruler big reveal 2

The data cable itself is damaged. Data cables can be damaged due to prolonged use or frequent bending. If the data cable is damaged, the power will not be able to be transmitted to the device, so it will not be able to charge or transfer data.

3.The equipment system is faulty. If the device is falsely elevated and the system fails, it may cause the device to fail to charge or transfer data properly.

In this case, the user needs to check whether there is a problem with the device system so that the problem can be solved in time. 4.Power supply issues.

If there's an issue with the power supply**, it may prevent your device from charging properly or transferring data. In this case, the user needs to check that the power supply** is working properly.

Here are a few ways to fix the problem of not being able to rush into the electricity:1Replace the cable or device port.

If the data cable or device port is found to be damaged, the user needs to replace them in time. This key hosiery hob will help the user to use the device normally and ensure that the data cable is charged and transferred data properly. 2.

Check if there is a problem with the device system. If the device system fails, the user needs to check the manuscript and solve the problem. Users can try restarting the device or updating the device system to resolve the failure.

3.Check that the power supply** is working properly. If there is a problem with the power supply, the user needs to check that the power supply is working properly.

Users can try replacing the power supply** or check if the power cord is damaged.

When a PISHEN cable cannot be charged to power, users need to understand what may be causing the problem and take appropriate measures to solve the problem. If the problem cannot be solved by the pure method of burning the grip, the user can consider seeking professional help.