Safety Supervision Chief Engineer What is the position 20

The safety supervision engineer shall carry out the work under the guidance of the chief engineer, and his job responsibilities include:

1. Fully implement the "safety first".

1. Prevention first, comprehensive management", the implementation of safety monitoring of the project.

2. Review the safety qualifications of the construction team, and review the establishment and improvement of the safety management and supervision system.

3. Review the safety and civilization (environmental protection) construction measures and special safety measures in the construction organization design and supervise the implementation.

4. Participate in the technical disclosure meeting and put forward supervision opinions;

5. Inspect the improvement of safe and civilized construction facilities and equipment, and supervise the improvement;

6. Inspect the "safety permit" of large construction machinery, and it is strictly forbidden to use it without a license;

7. Do a good job of daily inspections, stop violations and violations in a timely manner, issue written notices in a timely manner according to the actual situation, and supervise rectification;

8. Track and monitor important processes and major hoisting operations and the dismantling and assembly of main construction machinery;

9. Monitor the fire protection project and participate in the acceptance work;

10. Organize or participate in safe and civilized construction picket team activities, on-site safety inspections, etc.;

11. At the regular meeting of the project supervision department, organize the study of relevant documents and regulations on safe and civilized construction, and put forward the safety work opinions that should be monitored in the supervision work;

12. Responsible for collecting, remittating and sorting out information on safety supervision, and participating in the preparation of monthly supervision reports;

13. Complete other tasks assigned by the chief engineer.

Looking at the institutional setup, it can basically be considered that it is under the safety manager, with a few brothers below, which is higher than the engineer position.

I don't know, it should be similar to the supervision engineer in the project, but it is only in charge of safety production.

The supervising engineer is the representative of the owner to monitor the project quality, project progress, investment control, and the management, safety management, organization and coordination of the family, and is the bridge between the owner and the contractor.

Job Responsibilities. 1. The safety supervisor is the main implementer of the daily supervision of the project safety production, and performs the duties of project safety production supervision on behalf of the chief engineer in the process of project engineering supervision.

2. Safety supervisors should conscientiously implement the "Regulations on the Management of Safety Production in Construction Projects", implement the guidelines and policies, laws and regulations, norms and standards of labor protection and safety production, and do a good job in publicity, education and supervision of safety production.

3. The safety supervisor has the right to participate in the review of the construction organization design (plan) and safety technical measures plan, and supervise and inspect the implementation of the plan.

4. Safety supervisors should do a good job of daily safety inspections and grasp the dynamics of safety production.

5. The safety supervisor shall participate in the supervision of safety inspection activities and make records of safety activities.

6. The safety supervisor has the right to inspect the construction personnel holding certificates, and has the right to stop the unlicensed work of special types of workers.

7. In the process of supervision, the safety supervisor has the right to stop illegal command and illegal operation; If it is found that there is a hidden danger of safety accidents, it has the right to require the construction unit to rectify it, and shall report to the supervising engineer in a timely manner; If the situation is serious, the construction unit shall be required to temporarily stop the construction and immediately report to the chief engineer.

8. The safety supervisor shall supervise and inspect the implementation of the safety rectification notice of the construction unit. The right to verify the content of the rectification notice reply form, and if the rectification requirements are not met, the right to request continued rectification, and report the verification situation to the superintendent.

The difference between safety supervisor and safety officer: the division of labor in the project is different.

1. Safety supervisors focus on safety, including on-site inspections, side stations and the establishment, collection, sorting and archiving of safety supervision data. This is according to the division of labor of the project director, and a supervisor on the project is designated to be responsible for safety, then he is the safety supervisor.

2. The supervisor is mainly responsible for learning and implementing the relevant construction supervision policies. Supervisor is a position that refers to a person who has been trained in supervision business, has relevant professional knowledge of similar projects, and is engaged in specific supervision work.

Supervision is to inspect and supervise the responsible area; It does not involve the implementation of rectification of specific projects, and the nature of industry supervision on behalf of Baixing.

The project supervision unit refers to the service organization established in accordance with the law and obtained the qualification certificate of the engineering supervision and combustion management enterprise issued by the competent construction department, and is engaged in construction project supervision and related service activities.

The construction project supervision unit is entrusted by the construction unit to control the quality, cost and progress of the construction project in the construction stage in accordance with laws and regulations, engineering construction standards, survey and design documents and contracts, manage the contract and manuscript information, coordinate the relationship between the relevant parties of the project construction, and perform the service activities of the statutory duties of construction project safety production management.

In addition to supervision and inspection, the safety officer should also carry out specific management and rectification of the responsible area, which belongs to the nature of enterprise management.

The construction safety officer is responsible for inspecting and inspecting the safety status of the construction site, and is responsible for safety education and safety disclosure for new entrants. All potential safety hazards found on the construction site should be reported to the foreman, project manager or relevant leaders immediately and have the right to stop the construction work.

The safety officer has the right to check the internal information, logs, records and other documents related to safety and urge relevant personnel to improve and improve. The safety officer and the project manager are the first safety responsible persons on the construction site, and the safety officer does not have direct command over the construction.

The safety officer is obliged to accept the inspection of the construction site and internal information by the administrative department. All personnel on the construction site should actively cooperate with the safety officer.

Safety engineer refers to professional and technical personnel engaged in safety production management, safety engineering and technical work or providing professional services for safety production.

Security Engineer Jobs:

1. Formulate safety production rules and regulations, safety technical operation procedures and operating procedures.

2. Investigate the hidden dangers of accidents, formulate rectification plans and safety measures.

3. Formulate a safety training plan for employees.

4. Select and distribute labor protection equipment.

5. Investigation of production safety bystanders.

6. Formulate major hazard detection, assessment, monitoring measures and emergency rescue plans.

7. Other safety production work matters.

Safety engineer is the national safety management practice qualification, after passing the examination jointly organized by the Ministry of Human Resources and Social Security and the State Administration of Work Safety, after the employer has been registered and approved by the audit and approval, the practice qualification certificate can be practiced. Only then can you use the title of national registered safety engineer.

Safety engineer refers to the person who has obtained the qualification certificate of the registered safety engineer of the People's Republic of China, engaged in safety production management and safety technology work in the production and business operation unit or engaged in the professional service of safety production in the safety production intermediary agency, and has obtained the practice certificate of the registered safety engineer of the People's Republic of China in accordance with the regulations.

Identify unsafe behavior and take steps to educate others.

The chief engineer of the safety supervision department is the first person responsible for the technical management of the safety supervision department, and must organize and carry out safety inspections, safety technology management and other work under the leadership of the director of safety supervision. Article 1 The Coal Mine shall be fully responsible for the safety and technical management of the Work Safety Supervision Department, and shall ensure that the coal mine shall comply with the national laws, regulations, rules, systems, standards and technical specifications related to safety production in the process of safe production. Article 2 Organize the preparation of monthly, quarterly, and annual plans for mine safety inspections to ensure the regularity of safety inspections.

Article 3 Participate in the review of the operating procedures of the mining face, the prudent implementation of safety technical measures, the mine disaster prevention and treatment plan, the production operation plan and various plans related to safety production. Article 4 analyzes the safety status of the coal mine according to the actual situation on site, and puts forward specific opinions to the director of safety supervision. Article 5 should often go deep into the scene, find and solve potential safety hazards in a timely manner, report to the director of safety supervision in a timely manner, and put forward treatment suggestions.

Article 6 Assist the chief engineer and the director of safety supervision to do a good job in the investigation and treatment of major accidents, and report them in a timely manner according to the regulations. Article 7 is responsible for the safety and technical supervision and inspection of the whole mine. Article 8 is responsible for the establishment and management of technical files for coal mine safety inspections.

Article 9 Participate in the investigation, analysis and handling of accidents. Article 10 Assist the relevant departments in carrying out the training of employees in safety technology, education and special types of work. Article 11 Regularly check the implementation of the three major regulations.

Article 12 must be conscientious and put an end to the phenomenon of "three violations of the law with a wide ruler".

The responsibilities of the safety engineer of the director's office are very important, in his position to seek his job and travel, understand the details of his position, and do a good job in each operation link in order to do the best. Zhongda Consulting will talk to you about the responsibilities of the safety engineer of the General Appeal Sales Supervision Office.

1) Responsible for supervising the establishment of the safety risk management system of the project department, and checking the safety status of each construction bid section and site. (2) Prepare the safety supervision plan and the implementation rules for safety supervision. (3) Supervise and inspect the construction and implementation of the safety risk management system of the construction unit, and evaluate the organization, personnel, qualifications, equipment and effectiveness of the monitoring implementation of the construction monitoring.

4) Review the safety special construction plan, monitoring plan, emergency plan and environmental protection measures prepared by the construction unit, and submit it to the director for approval. (5) Inspect the safety inspection and execution of the construction site, and be responsible for the coordination and organization of safety risk assessment, early warning and information reporting. (6) Review and supervise the monitoring, evaluation, early warning, information reporting and early warning response and disposal of the construction unit.

7) Responsible for the preparation of safety supervision report. (8) Responsible for strengthening supervision and inspection of the handling of risk projects in the yellow comprehensive warning state, and reporting the results and changes to the monitoring and management sub-center in a timely manner. (9) Drafting and issuing the "Supervision Notice" on safety supervision with the authorization of the Superintendent; (10) Prepare the content of safety supervision in the monthly report of audit supervision.

Formulate safety production rules and regulations, safety technical operating procedures and operating procedures;Investigate the hidden dangers of accidents, and formulate rectification plans and safety measures;Develop a safety training plan for practitioners;Selection and distribution of labor protection equipment;Investigation of production safety accidents.

1. The registered safety engineer shall be appointed by the employing unit, and practice within the prescribed scope of practice in accordance with the registration category, and at the same time sign and affix the practice seal on various documents and reports issued.

2. The following safety production work of the production and business operation unit shall be attended by a registered safety engineer and signed by the opinion:

1. Formulate safety production rules and regulations, safety technical operation procedures and operating procedures.

2. Investigate the hidden dangers of accidents, formulate rectification plans and safety measures.

3. Formulate a safety training plan for employees.

4. Select and distribute labor protection equipment.

5) Investigation of production safety accidents;

6. Formulate major hazard detection, assessment, monitoring measures and emergency rescue plans.

7. Other safety production work matters.

3. The employing unit shall establish a file of practice activities for the registered safety engineer and ensure the authenticity of the content of the file.

With the strict regulation of safety issues in various fields of the country, the demand for registered safety engineers in the market will gradually increase in the future. The development prospects of Zhu'an are certainly bright, and this certificate will become more and more popular and valuable.

With the continuous improvement of people's living standards, and the society has become more and more attached to safety, the gradual standardization of safety management is also destined to lead to the rapid increase in the current market demand for registered safety engineers in China. Demand determines the market, at present, the number of people with safety engineer certificates in China can not meet the market demand, the market is in short supply, and the value of the certificate will naturally follow.

After obtaining the Registered Safety Engineer certificate, you can meet more friends in the construction circle, and even meet experts and leaders in multiple industries, which will not only increase your knowledge, but also broaden your network.