An expository essay about a computer Kneeling and begging!!!!!!!

It's okay, this is a system self-test, there are two people upstairs who said yes, you don't care, the computer will automatically enter the desktop after the self-test, and the computer self-test will generally be suddenly powered off, forced shutdown or automatically start this program every once in a while to detect whether the hardware and system software are normal, don't worry.

It's going to be a little longer.

Wrong shutdown, sudden power failure, is the computer abnormal shutdown, the next time the machine is turned on, it will be automatically detected, generally about 2 minutes will be detected, it will automatically enter the system, after this detection is completed, the next time into the system will not be detected.

When the computer is turned on, the blue screen and English appear when the computer system is self-checking, you don't press the enter key and wave the esc key during the self-test, and wait for the self-test to enter the system by yourself, and the next time your computer restarts, there will be no blue screen and English.

You should have just pressed the main engine to turn it off, right?

After an illegal shutdown for various reasons, the computer reboots and detects this abnormality, triggering a self-test program for the disk.

The characteristics of this "fake blue screen" are: there is a partition drive letter, there is a self-test percentage in the step, and when it is completed, it can be.

In general, the user should not interfere (there will be false stagnation in the middle of the process), and let it automatically complete the disk self-test operation.

If the disk self-test cannot be completed properly (the time is too long), you can also press the enter key to interrupt the disk self-test.

If the disk self-test will be carried out every time the computer is turned on, this is an abnormal phenomenon, and the self-test can be set in the registry to stop, the method is as follows: Start Run Input: regedit Enter (or press OK) to open the registry, and set the Yufinch position to :

subkey, then find the bootexecute key-value key in the right window, clear its value, and finally press the F5 key to refresh the registry to take effect.

Before clearing the data, you can copy the value under the name bootexecute: autocheck autochk*

Then click Add to Favorites on the toolbar to paste the data from the value name into it. In the future, if you want to automatically invoke disk self-test, you can restore this data according to the figure.

360 has System Repair-Blue Screen Repair very well used.

It's good to fix it.

It's really not possible for a human expert to help you fix it, it's free.

This is a problem with the disks, please fix it (fix it for each disk or just fix c).

Built-in disk repair method:

The specific steps are as follows: select the drive letter in my computer, right-click to select the properties, select "Tools Start Checking" in the pop-up drive properties window, and select "Automatically repair file system errors" and "Scan and recover bad sectors", and then click Start, the scanning time will vary depending on the disk capacity and scanning options (after doing it according to the above method, a box will pop up, the point is, repair after automatic shutdown at boot, win7 select the disk check button according to the plan).

Bad sectors on the hard drive will lead to corruption or loss of computer system files, computer failure to boot or freeze. Hard disk bad sectors can be repaired using NDD Disk Utility or Scandisk.

If the fault persists, please restore the system or reinstall it (it is still not possible to format the hard disk and repartition and reinstall it, if it doesn't work, you will have to replace the hard disk, or overhaul it).

Clean up your browser cache: Start Control Panel Internet Options Browsing History Delete Tick Items to delete.

Hover over your account, go out of the menu later, and then click the hi icon on the right to see the relevant information.

Method: Open the cmd command prompt. Or win+r enter cmd enter, there will be a cmd command prompt, and then enter chkdsk x c: enter, it will prompt in the next start.

c:\documents and settings\administrator>chkdsk /x c:

The file system is of type NTFS.

The current drive could not be locked.

Because another process is using this volume, you can't run chkdsk. Do you plan to check this volume the next time the system restarts? (y/n)

Enter y enter.

Do you plan to check this volume the next time the system restarts? (y n) y will check the volume the next time the system restarts.

Then restart your computer and wait for the hard drive to be repaired. Just wait for it to go to the desktop.

Start – Run – cmd

Then enter chkdsk c: f r

Carriage return runs. There will be two prompts, select y for both

Use with caution, though.

Sue you for an easy way.

Click on the C drive, right-click - "Properties", find "Tools", and click "Start Check".

Tick the boxes in front of "Automatically fix file system errors" and "Scan and fix bad sectors" Click "Start" It will prompt you to restart the automatic detection You then restart the computer and a blue screen will appear Auto Detect will be fine after the detection is done.

If that still doesn't work, try this tool.

Start – Run – cmd

Then enter chkdsk c: f r to run enter.

There will be two prompts, select y for both

This is QQ upgrade file corruption.

Uninstall the Q software,Reinstall Q,Don't install the C disk,Try it.,But your problem,I feel that the chance of your poisoning is not small.,Or it's a more important file corruption.,As for how it's damaged.,I guess it's poisonous.。

Like my computer, it is recommended to leave him alone for the time being, or find a friend to help you reinstall the system.

You can find the folder, single click right to repair it and take a look, or you can take the comments of the landlord above