Law major, graduated in 08, can I take the supervision engineer exam?

According to the regulations, it is not possible, the major does not meet the requirements, and it must be a major in engineering technology and engineering economics to apply for the examination.

1. Registration conditions:

1) Conditions for taking the examination of all subjects (four subjects):

Citizens of the People's Republic of China, in good health, law-abiding, with one of the following conditions, can apply to participate in the supervision engineer qualification examination.

1. College degree or above in engineering technology or engineering economics.

In accordance with the relevant regulations of the state, obtain an intermediate position in engineering technology or engineering economics, and serve for 3 years.

2. In accordance with the relevant provisions of the state, obtain senior positions in engineering technology or engineering economics.

Graduated from a secondary school in engineering technology or engineering economics before the year (including 70 years), in accordance with the relevant provisions of the state, obtained an intermediate position in engineering technology or engineering economics, and served for 3 years.

2) Conditions for exemption from some subjects:

Candidates who are engaged in engineering construction supervision and have the following four conditions at the same time can be exempted from the two subjects of "Engineering Construction Contract Management" and "Engineering Construction Quality, Investment and Progress Control".

Graduated from technical secondary school (including technical secondary school) or above in engineering technology or engineering economics before the year (including 70 years);

2. In accordance with the relevant regulations of the state, obtain a high degree in engineering technology or engineering economics.

level position; 3. Engaged in engineering design or engineering construction management for more than 15 years;

4. Engaged in supervision for 1 year.

All citizens of the People's Republic of China, law-abiding and have one of the following conditions, can apply to participate in the national supervision engineer qualification examination:

1. College degree or above in engineering technology or engineering economics, in accordance with relevant national regulations, obtained intermediate positions in engineering technology or engineering economics, and served for 3 years;

2. In accordance with the relevant provisions of the state, obtain senior positions in engineering technology or engineering economics.

Graduated from technical secondary school in engineering technology or engineering economics before the year (including 1970), in accordance with the relevant provisions of the state, obtained intermediate positions in engineering technology or engineering economics, and served for 3 years.

After graduating from a junior college and working for 6 years, you can apply for the exam.

The application conditions for registered supervision engineers are as follows:

A) where abide by the Constitution of the People's Republic of China, laws and regulations, with good professional quality and moral character, with one of the following conditions, can apply to participate in the supervision of the engineer professional qualification examination:

1. Have a college degree (or higher vocational education) in various engineering majors, and have been engaged in engineering construction, supervision, design and other business work for 6 years;

2. Have a bachelor's degree or degree in engineering, management science and engineering, and have been engaged in engineering construction, supervision, design and other business work for 4 years;

3. Have a master's degree or professional degree in engineering, management science and engineering, and have been engaged in engineering construction, supervision, design and other business work for 2 years;

4. Doctoral degree in engineering, management science and engineering.

Approved to carry out the pilot area, apply to participate in the supervision engineer professional qualification examination, should have a bachelor's degree or above.

Exemption conditions: B) with one of the following conditions, to participate in the supervision engineer professional qualification examination can be exempted from the basic subjects:

1. Has obtained the qualification certificate of highway and water transportation engineering supervision engineer;

2. The qualification certificate of water conservancy project construction supervision engineer has been obtained.

Those who apply for exemption from some subjects should provide the corresponding materials when registering.

After graduating from junior college, you need to be engaged in engineering construction, supervision, design and other business work for 6 years to register for the supervision engineer examination.

The following are the conditions for the supervision engineer to apply for the examination:

Those who abide by the national constitution, laws and regulations, and meet one of the following conditions, can apply to participate in the supervision engineer professional qualification examination:

1) Have a college degree (or higher vocational education) in various engineering majors, and have been engaged in engineering construction, supervision, design and other business work for 6 years;

2) Have a bachelor's degree or degree in engineering, management science and engineering, and have been engaged in engineering construction, supervision, design and other business work for 4 years;

3) Have a master's degree or professional degree in engineering, management science and engineering, and have been engaged in engineering construction, supervision, design and other business work for at least 2 years;

4) Doctoral degree in engineering, management science and engineering.

In 2020, in Beijing and Shanghai, we will carry out pilot work to improve the registration conditions for the professional qualification examination of supervision engineers, and the pilot major is civil engineering and construction engineering (traffic and transportation engineering and water conservancy engineering majors do not participate in the pilot), and candidates in the pilot area should have a bachelor's degree or above. Those who originally participated in the 2019 supervision engineer qualification examination, with a college degree or below, and have passed the subject within the validity period, can continue to register for the examination in the pilot area.

First, the examination of all subjects:

Those who abide by the Constitution, laws and regulations of the People's Republic of China, have good professional quality and moral character, and have one of the following conditions, can apply to participate in the professional qualification examination of supervision engineers:

1) Have a college degree (or higher vocational education) in various engineering majors, and have been engaged in engineering construction, supervision, design and other business work for 6 years;

2) Have a bachelor's degree or degree in engineering, management science and engineering, and have been engaged in engineering construction, supervision, design and other business work for 4 years;

3) Have a master's degree or professional degree in engineering, management science and engineering, and have been engaged in engineering construction, supervision, design and other business work for at least 2 years;

4) Doctoral degree in engineering, management science and engineering.

2. Exemption conditions for some subjects:

With one of the following conditions, participating in the supervision engineer professional qualification examination can be exempted from the basic subjects:

A) has obtained the highway and water transport engineering supervision engineer qualification certificate;

2) has obtained the qualification certificate of water conservancy project construction supervision engineer.

A junior college requires more than 6 years of work experience before applying for the Registered Supervision Engineer examination.

Those who meet one of the following conditions can apply to take the examination: (cancel the title requirement) 1) Have a college degree (or higher vocational education) in various engineering majors, and have been engaged in engineering construction, supervision, design and other business work for 6 years;

2) Have a bachelor's degree or degree in engineering, management science and engineering, and have been engaged in engineering construction, supervision, design and other business work for 4 years;

3) Have a master's degree or professional degree in engineering, management science and engineering, and have been engaged in engineering construction, supervision, design and other business work for at least 2 years;

4) Doctoral degree in engineering, management science and engineering.

After graduating from a college degree, he has been engaged in engineering construction, supervision, design and other business work for 4 years, after graduating with a bachelor's degree, he has been engaged in engineering construction, supervision, design and other business work for 3 years, and after graduating with a master's degree, he has been engaged in engineering construction, supervision, design and other business work for 2 years.

There are 4 subjects in the supervision engineer examination, and the sub-bridge sedan is "Basic Theory and Related Regulations of Construction Engineering Supervision", "Construction Engineering Contract Management", "Construction Engineering Target Control", and "Construction Engineering Supervision Case Analysis". Among them, "Case Analysis of Construction Project Supervision" is a subjective question.

The supervising engineer is divided into three professional categories: civil engineering and construction engineering, traffic and transportation engineering, and water conservancy engineering. Among them, the Ministry of Housing and Urban-Rural Development is responsible for the major of civil engineering and construction; The Ministry of Transport is responsible for the traffic and transportation engineering major; The Ministry of Water Resources is responsible for the major of water conservancy engineering.

Supervision bridge engineer is a highly professional profession, with important supervision and management responsibilities for the quality and progress of engineering projects. Obtaining the supervision engineer qualification certificate can enhance personal professional ability and competitiveness, so many undergraduate graduates have the idea of obtaining this certificate. However, there is no fixed time for supervising engineers to obtain the qualification certificate, it depends on the individual's learning ability, work experience and learning progress and other factors.

Generally speaking, the few years after graduating from a bachelor's degree can be a good time to obtain a supervision engineer qualification certificate. During this time, you can accumulate a certain amount of work experience and practical experience to improve your professionalism. By participating in various types of engineering projects, you will be able to understand and master the technology and knowledge in different fields, and at the same time be familiar with the relevant laws and regulations and project management standards.

In terms of personal learning, you can take part in a number of training courses or seminars related to construction engineering to learn the knowledge and skills required of a supervising engineer. These training courses can help you gain a deeper understanding of the key issues in the construction process and improve your ability to supervise the project.

In addition, you can prepare for the qualification exam for the Supervising Engineer. This exam usually consists of two parts: a theory test and a practical test. The theoretical exam covers the knowledge of construction engineering management, engineering laws and regulations, engineering construction technology, etc.

Practical exams require you to solve problems in real-world engineering projects, demonstrating your technical ability and practical experience.

It takes a certain amount of time and effort to obtain the supervision engineer qualification certificate, so you need to develop a reasonable learning plan and maintain continuous efforts and persistence in the learning process. At the same time, it is also very important to actively participate in engineering projects, continuously learn and improve your professional quality.

In general, the examination time for the supervision engineer qualification certificate varies from person to person, mainly depending on the individual's learning ability, work experience and learning progress and other factors. By accumulating work experience, attending training courses, and preparing for qualification exams, you can obtain a supervision engineer qualification certificate and become a qualified supervision engineer a few years after graduating from your bachelor's degree.

A few years after graduating from a junior college, you can take the supervision engineer exam as follows:

After graduating from college, it takes 6 years to take the supervision engineer examination. Among the conditions for the supervision of engineers, there will be requirements for the candidates' majors, academic qualifications and working years, and candidates with college degrees need to have 6 years of work in engineering construction, supervision and design.

Supervision engineer junior college can be reported for a few years.

College graduates as long as they meet the 6 years of work experience in engineering construction, supervision, design and other business can apply for the supervision engineer, and the supervision engineer work in the hail calculation is divided into full-time education and liquid block high part-time education, full-time education only counts the working years after graduation, part-time education can accumulate before and after graduation working years.

Supervision engineer application conditions stipulate that with a college degree (or higher vocational education) in various engineering categories, engaged in engineering construction, supervision, design and other business work for 6 years, can register for the supervision engineer examination.

Full-time college graduates must graduate at least 6 years before they can take the supervision engineer examination, and full-time college candidates need to start engaged in engineering construction, supervision, design and other businesses from graduation, while part-time college graduates before engaging in engineering construction, supervision, design and other business years can be counted in the supervision engineer examination working years, so after graduation as long as you meet the six-year working years can apply for the examination.

The distribution of question types in the supervision engineer examination subjects.

There are a total of 4 subjects in the examination for supervising engineers, 2 basic subjects and 2 professional subjects. The details are as follows:

Contract Management: Multiple choice questions, multiple choice questions. Among them, there are 50 multiple-choice questions and 30 multiple-choice questions.

Theoretical Regulations: multiple-choice questions, multiple-choice questions. Among them, there are 50 multiple-choice questions and 30 multiple-choice questions.

Objective Control: multiple-choice questions, multiple-choice questions. Among them, there are 80 multiple-choice questions and 40 multiple-choice questions.

Case Analysis: 6 case analysis questions.

Six years. With a college degree (or higher vocational education) in various engineering majors, engaged in engineering construction, supervision, design and other business work for 6 years can apply to participate in the supervision engineer professional qualification examination. Applying for the supervision engineer must meet the requirements of professional, educational and working years, and the three are indispensable.

Those who abide by the Constitution, laws and regulations of the People's Republic of China, have good professional quality and moral character, and have one of the following conditions, can apply to participate in the professional qualification examination of supervision engineers:

1) Have a college degree (or higher vocational education) in various engineering majors, and have been engaged in engineering construction, supervision, design and other business work for 6 years;

2) Have a bachelor's degree or degree in engineering, management science and engineering, and have been engaged in engineering construction, supervision, design and other business work for 4 years;

3) Have a master's degree or professional degree in engineering, management science and engineering, and have been engaged in engineering construction, supervision, design and other business work for at least 2 years;

4) Doctoral degree in engineering, management science and engineering.

The junior college needs to work for 6 years before you can take the supervision engineer exam. Supervision engineer working years must be engaged in engineering construction, supervision, design and other business work years, college degree examination supervision engineer needs to study the major for the engineering majors.

How many years can you take the supervision engineer exam after graduating from a junior college depends on the form of education, and the full-time college must graduate at least 6 years before you can apply for the supervision engineer, because you need to meet the 6 years of working experience; If the part-time junior college meets the 6 years of working experience, you can apply for the supervision engineer examination after obtaining the graduation certificate.

It is pointed out in the conditions for the supervision engineer to apply for the supervision engineer with a college degree, and the major required to study is the major of various engineering categories, and at the same time, it is also necessary to engage in engineering construction, supervision, design and other business work for 6 years.

Calculation method of the working years of the supervision engineer: calculated by year, the deadline is generally December 31 at the end of the year of application.

The registration for the supervision engineer certificate examination needs to meet one of the following conditions:

1. Have a college degree (or higher vocational education) in various engineering majors, and have been engaged in engineering construction, supervision, design and other business work for 6 years;

2. Have a bachelor's degree or degree in engineering, management science and engineering, and have been engaged in engineering construction, supervision, design and other business work for 4 years;

3. Have a master's degree or professional degree in engineering, management science and engineering, and have been engaged in engineering construction, supervision, design and other business work for 2 years;

4. Have a high doctorate degree in engineering, management science and engineering.