How do I get a certificate of surveying? 5. How to obtain a measurement certificate?

I am the main road bridge survey, to take the test or to test the measurement engineer is the most practical, but the main thing is to have the ability, the staff unit does not look at your certificates, mainly to see the actual work ability, by the way, the responsibility of this industry is too great, the project has done a good job, there is nothing to measure, if there is a problem, it will all be pushed to the measurement.

Engineering SurveyorThe only issuing authority for the certificate is: the National Bureau of Surveying, Mapping and GeoinformationVocational Skills AssessmentGuidance Center. This certificate is issued by the Beijing National Surveying, Mapping and Geographic Information Vocational Skills Appraisal Guidance Center, and there is no certificate issuing agency in each province.

The conditions for obtaining the engineering surveyor certificate are: engineering surveying, surveying and mapping engineering.

and other surveying and mapping majors, college degree or above. Engineering surveyor refers to the professional surveying personnel who are engaged in the surveying and management of engineering. Responsible for the measurement of all stages of the project from start-up, construction and operation.

Job description. Carry out survey, selection of control points and burial of rocks in engineering surveys; Measurement and calculation are obtained to meet the specified accuracy level.

control point data.

Carry out observation, bookkeeping, and engineering topographic maps in special surveys such as engineering construction lofting, building construction surveying, linear engineering surveying, bridge engineering surveying, underground engineering construction surveying, water conservancy engineering dust return surveying, geological surveying, ** surveying, mine underground surveying, building deformation surveying, etc.

of mapping. Collation and budget estimation of field observation results, or drawing field topographic maps into original topographic maps; Verify the measurement results and provide measurement data and measurement charts.

Introduction to Engineering Surveyor Training.

Senior engineering surveyors should be able to carry out the measurement of underground penetration surveys and adjust the penetration errors.

Job responsibilities of engineering surveyor: responsible for the management of measuring instruments in the project department, and the establishment of measuring instrument ledger and maintenance ledger.

Engineering surveyors (technicians) should be able to carry out surveys and surveys of topographic maps of various scales.

Engineering surveyors (senior technicians) should be able to provide technical guidance to low-level engineering surveyors according to the difficult problems encountered in engineering surveying operations.

Engineering surveyors (senior technicians) should learn the knowledge of the technical regulations for the acceptance of topographic map surveying and mapping results.

Engineering surveyors (technicians) should learn the accuracy analysis and selection of construction lofting methods.

An engineering surveyor is a professional surveying professional engaged in the surveying and management of engineering.

Engineering surveyors need to have strong numeracy, judgment, analytical skills and spatial sense.

Engineering surveyors (technicians) should be able to conduct technical training according to the training plan and content.

Senior engineering surveyors should be able to carry out all kinds of engineering construction control network axis measurement, lofting and planning correction surveying inspection and sorting.

Engineering Surveyor: Junior, Intermediate, Senior, Technician, Senior Technician.

Property Surveyor: Junior, Intermediate, Senior, Technician, Senior Technician.

Cadastral Surveyor: Junior, Intermediate, Senior, Technician, Senior Technician.

Photogrammetry: Elementary, Intermediate, Senior, Technician, Senior Technician.

Cartographer: Beginner, Intermediate, Advanced, Technician, Senior Technician.

Geodetic Surveyor: Primary, Intermediate, Senior, Technician, Senior TechnicianThe only issuing authority for the Engineering Surveyor Certificate is: Vocational Skills and Knowledge Appraisal Guidance Center of the National Administration of Surveying, Mapping and Geoinformation.

This certificate is issued by the National Surveying, Mapping and Geographic Information Vocational Skills Appraisal Guidance Center, and only vocational skills appraisal stations in various provinces do not have certificate issuing institutions.

Engineering surveyors examined: junior, intermediate, senior, technician, senior technician.

Property Surveyor: Junior, Intermediate, Senior, Technician, Senior Technician.

Cadastral Surveyor: Junior, Intermediate, Senior, Technician, Senior Technician.

Photogrammetry: Elementary, Intermediate, Senior, Technician, Senior Technician.

Cartographer: Beginner, Intermediate, Advanced, Technician, Senior Technician.

Geodetic Surveyor: Elementary, Intermediate, Senior, Technician, Senior Technician.

Issued by the Ministry of Surveying, Mapping and Information: national network inquiry, nationwide.

There are five levels: Beginner (Level 5), Intermediate (Level 4) Skill, Advanced Skill, Technician (Level 2), and Senior Technician (Level 1). Application materials: a copy of the ID card, four two-inch color photos with a blue background, and a copy of the graduation certificate.

National Vocational Qualification Certificate System - The legal basis for the implementation of the vocational qualification certificate system by the National Department of Geographic Surveying and Mapping.

Article 69 of Chapter VIII stipulates: "The State shall determine the classification of occupations, formulate vocational skill standards for the specified occupations, implement the vocational qualification certificate system, and the assessment and appraisal institutions approved by the state shall be responsible for the implementation of vocational skill assessment and appraisal of workers." ”

Article 8 of Chapter 1 of the Vocational Education Law clearly states: "The implementation of vocational education shall be based on actual needs, in accordance with the occupational classification and occupational grade standards formulated by the state, and the system of academic diplomas, training certificates and vocational qualification certificates shall be implemented. "These regulations determine the legal basis for the implementation of the vocational qualification certificate system and the vocational skills appraisal of the State.

Nationwide network query information.