-
From the monitoring of other data on the computer, there is no change, is there a problem with my CPU?
Hello, not necessarily. According to what you say. Please pay attention to whether it is caused by CPU heat dissipation problems.
It is recommended to use software to observe the speed of the CPU fan, or the best thing to do is to open the case and observe whether the CPU fan is working properly. Remove the fan and observe whether the CPU silicone grease is applied evenly, it is best to wipe off the original silicone grease and reapply it. Take care to apply evenly.
A pack of CPU silicone grease is only 1 2 yuan).
Do a good job of cooling the heat of the CPU (eliminate excessive dust and clean it up).
OC three Red Sea mini HP-825 50 yuan.
Overclocking three standard version HP-928 65 yuan.
If there's anything you don't understand, you can hi me. I'll talk to you!
-
It's not that there's something wrong with your CPU, it's that there's something wrong with your CPU fan.
**Format conversion is very CPU resource intensive, so 100% occupancy is normal, it is recommended that you clean up the dust of the fan and check whether the fan speed is normal.
-
There is a problem with heat dissipation.
1.The heatsink and CPU are not in good contact.
The fan doesn't turn anymore.
-
First kill the virus, and then use your hands to feel the wind blowing from the fan of the following CPU, whether it is very hot.
It's best to change the fan.
-
Summary. Heatsink failure: If the CPU fan is not working properly or there is too much dust, it will lead to poor heat dissipation. The solution is to clean the radiator and replace the faulty fan.
Heatsink failure: If the CPU fan does not work properly or there is too much dust, it will lead to poor heat dissipation. The solution to the judder is to clean the radiator and replace the faulty fan.
I'm still a little confused, can you be more detailed?
Overclocking: If the CPU is overclocked too much, it will cause the CPU temperature to rise. The workaround is to reduce the CPU frequency to a safe range.
Aging of heat dissipation material: If the heat dissipation material is aging, the heat dissipation paste on the heat sink needs to be replaced. The function of thermal paste is to fill the gap between the CPU and the radiator and improve the heat dissipation effect.
Hardware wheel call: If the CPU overheats, it may also be caused by hardware failures such as power supply and motherboard. At this point, the faulty hardware needs to be replaced.
Ambient temperature: If the ambient temperature is too high, it may also cause the CPU temperature to be too high. In the hot summer weather, you can turn on the air conditioner or install a case fan to reduce the ambient temperature.
-
The high temperature of the CPU is usually caused by the following reasons:1Thermal system failure:
Failure of the cooling system to cool down effectively enough, including the heatsink not being cleaned, the fan not working, etc., will cause the CPU temperature to rise; Overload: Running under high load, such as running complex applications or running multiple tasks at the same time, will consume a lot of computing resources and cause the CPU temperature to rise. 3.Obsolete hardware devices:
An old heatsink that doesn't match the new CPU can also cause the temperature to get too high; 4.Too high ambient temperature: If the working environment temperature of the CPU is too high, then the temperature of the CPU will also increase accordingly.
Solutions include: cleaning the radiator, replacing the cooling system, reducing CPU usage, and purchasing professional cooling equipment.
-
How to solve the high CPU temperature? Check it out, it's definitely a good one.
-
The CPU is generally at a normal temperature between 50-80, even if it reaches more than 100 degrees, don't worry, because the general BIOS is overheated and protected, and it will automatically shut down if it exceeds the temperature, and it cannot be turned on if it does not drop to the normal temperature. If your CPU temperature is too high, please install a high-power CPU fan, such as a CPU liquid cooling radiator, copper radiator, etc., even if it is a new computer, the configuration inside is sometimes just the basic configuration.
-
You can't see the screenshots. It is advisable to check the heat resistance film on the CPU connector, if it is worn out, it means that your machine is too old and needs to be replaced!
-
What software you use to test it may not be accurate.
-
How did you calculate that the CPU temperature was too high Are you sure that the automatic shutdown is because the CPU temperature is too high?
If yes, then go ahead.
What model is your CPU You didn't say - as far as I know, the temperature of the dual-core CPU is less than that of the Ben 4 and the hottest CPU known so far is the Ben D series.
In other words, if you're a Ben D CPU, there's no way around it, it's just so hot, you have to change a very, very good fan.
If it's other CPUs, the temperature is high when playing games, and there are only two reasons.
1 is that there must be a problem with your CPU fan, or you re-apply the glue, if you don't know how to wipe it, be sure to check the method on the Internet, don't wipe it yourself. Or you can buy an expensive fan with a big heatsink and buy a fan, and the heatsink on the fan, which is much better than the fan, and the small fan basically doesn't have the effect of lowering the temperature, and the focus is on the heatsink.
2. There is a problem with the BIOS settings If the motherboard is not broken, you need to check whether your motherboard BIOS supports smart fan speed on the Internet, when the CPU temperature exceeds 45, it will turn at high speed, and when it reaches 55 degrees, it will turn at full speed.
Of course, if the quality of your fan itself is not good, it doesn't matter how you set it up.
A good CPU fan with an even speed will not let the CPU exceed 50.
Hope it solves your problem.
-
The radiator and the CPU are not in good contact, put more silicone grease to contact and try it, it really doesn't work, it is a problem with the motherboard, and the repair report says that the heat is too large.
-
It may be that there is a problem with the motherboard**, see if the parts are broken, and upgrade the BIOS. If it doesn't work, take it for repair.
-
Mine too, the master went to the computer after-sales maintenance for a while, and then it was fine! You go check it out too!
I have been silently guarding you behind you.
Check out if they need help.
First prepare a *** thermal paste, such as overclocking three A2 diamond-level thermal paste, and then in the case of shutting down and unplugging the power cord, disassemble the chassis, remove the CPU radiator, separate the fan from the metal radiator, wipe off all the dust of the fan, the maximum speed of the fan of 9 cm should reach 5000+, if the maximum speed can only reach 3000+, then change to a new fan with a maximum speed of 5000+, and then put the metal radiator in the water to scrub and rinse, and then take it to dry, Then scrape off the old silicone grease on the surface of the CPU, wipe it clean, then squeeze out a little new thermal paste in the middle of the CPU surface, then install the sun-dried radiator and fan, install it back on the motherboard, check whether the installation is correct, plug in the fan power supply, and test the temperature when powered on. >>>More
Zhang Xinzhe singing; The rain kept falling.
You should now find out what he said when the system first started.