0x066a3b5d Instruction Referenced 0x00000000 Error Memory cannot be read

In response to the different questions of many netizens, after a long time of modification and supplementation, the answer [original] is basically fixed, ?Reproduction is strictly prohibited&. Friend! If you have a problem that you have solved in other ways, please say it for other friends to solve. Thank you!

Take a look at what is wrong with your computer below, and only the right medicine can solve it.

There are several main aspects to this problem:

If you use a pirated system, there may be such a problem, it is recommended to use [Genuine].

If it doesn't affect your computer or [occasionally] it doesn't happen, restarting your computer will disappear automatically.

If it is caused by a virus, upgrade the anti-virus software to completely disinfect the computer.

The hardware is mainly caused by incompatible memory modules, and the memory should be replaced if necessary.

system or other software, check whether the computer year, month, and day are correct. [The ghost version of the system is prone to this problem].

If the driver is unstable, reinstall or update the driver in time. At the same time, using Optimizer, 360, and Master Lu to clean up junk files will also cause this problem.

You don't need to delete Windows IE, you can just use another browser. For example: 360 Secure Browser, Window of the World Browser, Maxthon, etc.

The general solution for other software is to uninstall the software and reinstall, upgrade or replace it with another version.

1) If there is a problem with the system itself, install the official patch in time, and [reinstall the system if necessary].

2) If there is a problem with a certain software, here is mainly to look at the software running at boot, [use 360 and so on to check the software running on boot, and remove the software that does not need to run].

3) Software conflicts, uninstall the problematic software. (e.g., when installing or running, upgrading, patching, replacing another version, or uninstalling the problem).

The following methods can be tried: if it doesn't work, the only way to do it is to restore or reinstall the system

Trial command exclusion.

Start Run Enter cmd -- Enter, and enter the following command in the command prompt.

for %1 in (%windir%\system32\*.dll) do s %1 enter.

When you're done, underneath the input.

for %i in (%windir%\system32\*.ocx) do s %i carriage return.

If you are afraid of typing mistakes, you can copy these two commands, then right-click the mouse button after the command prompt, hit "paste", press enter, and wait patiently until the screen scrolling stops. Restart your computer

Run regedit into the registry, under hkey local machine software, microsoft windows, currentversion, explorer, shellexecutehooks, there should only be one normal key, and delete the rest. [If there is another (default) leave it alone, it is usually empty.] 】

Jack-of-all-trades, which means that he didn't say anything.

If it doesn't appear often, don't worry about it, if it's serious enough to affect normal use.

Then reinstall the system, don't use ghost, install the driver, and use 360 to patch the system after installation, and install antivirus software.

If this doesn't work, there may be a problem with the memory or motherboard, change the memory first, and then change the motherboard.

You can do that with the computer that you have installed.

Upstairs, don't mislead others, use useless clichés, and waste time.

There are two reasons why you are in this situation.

1.Poisoning. 2.The memory module is hard to break.

If you are poisoned, it is generally a demon storm virus, and you can use 360 security guards to kill and clear it, and pay attention to updating the patches on time.

There is also a case of cups that the memory module is broken, which may be physical or technical.

My situation is the same as yours, at the beginning I also patched according to what was said on the Internet, but it didn't work. Later, I learned that it was a memory module that was broken. It may be because the memory is small, and the overloaded program is always executed, causing the memory traffic data to overflow, and the memory cannot be read or written.

It's also possible that the memory module is broken. When you click OK will cause fake death, click cancel will make the taskbar white, and then change back, and at the same time the sound card driver will be destroyed, that is, there is no sound, if you are not connected to the Internet at this time, then you can't connect. If the cup is connected to the Internet before, then everything is normal, but there is no sound, except for restarting, the computer has been silent.

The only solution is to disassemble the machine and replace it with a matching memory module. If you can't change the memory at this stage, it is recommended to leave it alone after booting, let it slow down for about 10 minutes, and then don't click on the program with too much task load. This should ensure that the landlord can get on the net or something.。。

All in all, swapping out memory sticks is the only way to go.

There are many reasons why memory cannot be read or written.

You can take a look at the next software that fixes the memory that can't be read, if not, continue to look down.

1. The driver is unstable and incompatible with the system, which is most likely to cause memory failure to read or file protection (the main reason).

Solution: Change the driver.

2. One or more rogue software is installed on the system, which has a greater chance of IE or system crash, and file protection may also occur.

Workaround: Fix with 360 Cleanup.

3. There is a conflict between the programs loaded by the system or the programs that are running on the system, especially some antivirus software monitoring programs.

Workaround: Change the anti-virus software or turn off the firewall.

4. There are vulnerabilities in the system itself, which makes it vulnerable to network attacks.

Workaround: Update with 360 and patch.

5. Virus problems are also the main causes of memory can not be read, file protection, error ......

Solution: 360, Kingsoft, Rising and other anti-virus, kill Trojan horses.

6. If the memory cannot be read when playing the game, it is likely that the graphics card driver is not suitable (the graphics card here is not suitable for the game and the computer).

It is also possible that the system version is not new enough or does not meet the game or graphics card driver.

Solution: Change the game driver or system.

7. The problem that some software itself is insufficient.

Workaround: Patch and wait for the update package to appear.

8. Overheating of computer hardware is also one of the reasons why the memory cannot be read.

Solution: Strengthen heat dissipation, clean dust, 9. Poor compatibility between computer memory and motherboard is also the fatal reason why the memory cannot be read!

Solution: Replace the hair, change some accessories to see.

Pointing issues Please look again for the latest version of your program.

Do you have two memory sticks of different brands and models plugged into your computer? This is probably the reason for this, nothing is a big deal! Optimize the system

You're using a pirated operating system, so don't worry about that. You can continue to use it.

This problem arises again, are you looking for a draw?