Vantage Strong Exhaust Water Heater E2, Vantage Forced Exhaust Water Heater E

E2 means that the ignition is extinguished, and it is not good to catch fire.

Gas water heaters are water-controlled and have a minimum water flow requirement, which is not met, and the water heater cannot release gas and turn on the ignition and cannot be used.

It is recommended to check the water output of the hot water faucet, if it is small, it may be a problem caused by insufficient water flow.

The cold water is normal, the hot water output is small, you should consider why the original hot water is large, and now the hot water is small, the reason is that the scale deposit is more original, the problem of blocking the pipeline, the water flow rate does not meet the conditions, and the water heater can not be ignited.

There are many reasons why gas water heaters are not good for ignition, and any component damage of water, gas, and electricity will cause the water heater to fail to ignite. In fact, many times the reason why the fire cannot be ignited is because the hot water pipeline is blocked due to the scaling of the waterway, resulting in a large back pressure of the waterway flow, which is large to a certain extent, and the water heater water-gas linkage device will think that the hot water faucet has been closed and the gas channel is closed, there is no gas, of course, it can't catch fire, if the hot water faucet is fully opened in the near future, the hot water pressure is smaller, and the possibility is greater. Now that the igniter is working properly, it is even more certain.

Old brand, good quality, price can also be. Convenient for online shopping. Physical stores are also convenient.

Look at it, think about it, think about it, come and go, come and go. Nut ol magic figure to come different. Lochia lol Helen Keller v5 interstellar dinosaur ktv I touch lol6 sentences I can.

Playing on the roof.

VantageThe water heater shows that the sale of E2 is solving the age of the chain method:

1. Check whether the exhaust gas can be discharged normally.

After a long period of use, the Vantage water heater is susceptible to external influences and is easy to loosen or fall off, which will cause the intake and exhaust of the flue to affect the normal opening of the air pressure switch.

2. Check whether there are foreign objects in the flue.

Check the flue for foreign objects. If there is a foreign object, unclog it.

3. Check whether the fan of Sun Vantage water heater is abnormal or not working.

Check if the fan of the Vantage water heater is abnormal or if the rotation speed is slow. If this happens, we need to clean or replace the fan of the Vantage water heater.

4. Reset or restart the Vantage water heater.

Reset or restart your Vantage water heater and see if it will work again.

5. Power supply problems.

Check whether the AC power plug indicator is on, and first rule out the problem of the power supply part.

6. The hot water pipeline is blocked due to the scaling of the waterway.

As a result, the back pressure of the waterway flow is large, and to a certain extent, the water-gas linkage device of the water heater will think that the hot water faucet has been closed and turn off the gas, and the fire will not ignite and the waterway needs to be cleaned.

Winter is the peak period for the use of water heaters, but after a long time of use of water heaters, it is inevitable that there will be some problems, such as E2 failure, then Vantage.

1. How to solve the problem of Huastool loss wheel emperor water heater E2.

Vantage water heater E2 may be due to insufficient power or, in this case, just replace the new battery; If it is caused by insufficient water pressure, you may wish to close the water valve in other places first; It may also be due to insufficient pressure in the gas pipeline, in which case pressurization equipment needs to be installed; If there is a problem with the igniter of the water heater, you can contact the after-sales personnel to go up the base door for maintenance.

2. Precautions for the use of hot water jujube letter.

1. If the water heater is used for the first time after buying, before turning on the power supply, water must be injected into the water heater, and the water heater can be connected to the power supply only after it is full of water, and the socket connected to the water heater must be equipped with a grounding wire.

In order to avoid electric shock accidents during use.

2. If you often use a water heater at home, and the kitchen and bathroom share a water heater, the demand for hot water in this case is very large, in order to ensure that the water heater can continue to use hot water, you can lower the temperature of the water heater when the amount of hot water is not large, and then adjust the temperature of the water heater when the amount of hot water is large.

3. During the use of the water heater, do not touch the power socket with wet hands.

And before using the water heater to take a bath, you need to test the water temperature to avoid burns.

situation. In addition, the water heater needs to be cleaned and maintained every once in a while, and once the water heater is found to be faulty, it should be immediately contacted by after-sales personnel for on-site maintenance.

Summary: Vantage water heater E2 how to solve the relevant content is introduced to you here, and finally remind that if you do not use the water heater for more than three days, it is recommended to unplug the power plug of the water heater, and plug in the power plug before use, so that the UI is more power-saving!

The treatment methods of Vantage water heater display E2 are: check the power supply, check the water pressure, check the water temperature, clean the filter screen, and replace the parts.

1. Check the power supply.

We need to check if the power supply of the water heater is working properly. If there is a problem with the power supply, it will cause the water heater to malfunction. You can check whether the plug is plugged in tightly, whether the power supply is normal, whether the wire is broken, etc.

2. Check the water pressure.

If the water pressure of the water heater is insufficient, it will also lead to the failure of E2. At this time, you can check whether the faucet is open, whether the water pipe is blocked, etc.

3. Check the water temperature.

The water temperature of the water heater is also an important factor. If the water temperature is too high or too low, it will cause the water heater to malfunction. The temperature of the water heater can be adjusted to keep the water temperature within the appropriate range.

4. Clean the filter screen.

The filter is an important part of the water heater, and if the filter is contaminated or clogged, it can also cause the water heater to malfunction. The filter can be cleaned regularly to keep the filter clean.

5. Replace parts.

If none of the above methods solve the problem, then some parts need to be replaced. You can contact a professional maintenance personnel and ask them to check the cause of the water heater's failure and replace the corresponding parts.

The failure to ignite due to an error in the flame detection shows E2. The air inlet is blocked by foreign objects, resulting in a decrease in the air intake; The anti-backdraft baffle at the position of the smoke pipe is jammed, resulting in unobstructed smoke exhaust; The fan or the fan starting capacitor is damaged, and the fan does not rotate so that the flame is extinguished; The 4th or 5th nozzle on the right side of the distributor is blocked, and when the fire is converted, the flame is extinguished and the E2 fault is reported; Liquefied gas models are prone to carbon accumulation due to poor combustion, and a large amount of carbon deposits are blocked, making the smoke exhaust port unable to operate normally.

Vantage Water Heater Display E2 Solution:

1. When the flue is blocked or the flue resistance is too large, the program is interrupted. At this time, it is necessary to check whether the pipe connected to the air pressure switch is reliably plugged and whether there is air leakage.

2. When the fan fails, the speed is too low or stopped, and the program is interrupted. At this time, check whether the connection line between the fan and the main control board is reliably plugged, whether it is damaged, whether it is stuck, etc.

3. The best way is to ask a professional to help. But first of all, turn off the machine, do not do any operation, and wait for the master to come to repair. You can check whether the water heater is not filled with water and starts heating with electricity; Then check whether the inlet and outlet pipes of the machine are reversed or not installed in the water pipes, or the access to the water is connected to the wrong one; Finally, replace the control board to see if it can be solved.

Vantage water heater error**E2 is due to the failure to ignite due to the error in flame detection, you can check the type of gas by yourself, ** whether it is normal, otherwise contact the after-sales service personnel for maintenance.

The method of overhaul that cannot be ignited is as follows:

1. The ignition nozzle or the tinder nozzle will not ignite the ignition, if there is a spark and cannot catch fire, the nozzle or the corresponding gas path will be blocked, and the nozzle or the corresponding gas path should be cleaned.

2. If the ignition needle spark cannot be hit on the fire row, it means that the ignition needle is loose, the discharge tip is not aligned with the gas, or the ignition needle is faulty, the ignition needle position should be replaced or adjusted.

3. Piezoelectric ceramic ignition (this type has been eliminated), if there is no spark during ignition, it should be checked whether the piezoelectric ceramic is damaged, or the hammer is damaged, and it should be replaced.

4. If it is a flue water heater with sparks and no fire, check whether the solenoid valve is faulty or whether the wiring is reliable. 5.If there is no spark when the flue water heater is ignited, the water-gas linkage valve is broken, the battery is not powered or reversed, the battery box is rusty or has poor contact, the micro switch is broken, and the ignition controller is bad.

6. If it is a strong exhaust water heater and there is no spark, the reasons are bad water-gas linkage valve, bad motor of strong discharge, bad air pressure switch, bad ignition controller, etc.

If the ignition or ignition is clogged, it will not ignite. If there is a spark, the nozzle or the corresponding air path will be blocked, and the nozzle or the corresponding air path should be cleaned.

If the spark of the ignition needle cannot touch the fire rod, it indicates that the ignition needle is loose, the discharge tip is not aligned with the gas or the ignition needle is faulty, and the ignition needle position should be replaced or adjusted.

AnswerWhen the Vantage thermostatic water heater fails, a specific ** will be automatically displayed, E2 is one of the most common faults, which means that it stops when you click it. It is equivalent to the Vantage constant temperature water heater when ignition, there will be a quick self-inspection process, and the components it checks are ignition needle, feedback needle, gas **, flue, etc.

When "Vantage thermostatic water heater shows E2", it means that there is a certain problem in one of the components, or a certain link, so we should check and eliminate them one by one. Of course, the user cannot rule it out, the correct way to deal with it is to close the gas main valve, dial the power plug of the Vantage thermostatic water heater, and then call the Vantage water heater maintenance ** to report for repair.

What is the cause of E2 on the water heater and how to solve it?

2.If the water pressure is insufficient, you can turn off other places where water is used first.

3.If the pressure of the gas pipeline is not enough, a pressurization device can be installed.

4.There is no gas left. It is sufficient to restore the gas supply.

5.There is a problem with the ignition and so on, and this can only be warranted.

It is more likely to be a problem with the ignition device, and it is recommended to go to the store that repairs the wall-hung boiler water heater household appliances to deal with it. Or open the panel yourself and find the same ignition to replace it.

It's still after-sales, there is no warranty period.

1. Replace the battery of the water heater and check whether the problem is solved. 2. Check whether there is a problem with the water supply system in the family, close the inlet valve of the water heater, close the outlet valve of the water heater, check whether the water pressure is normal, if the water pressure is too small, you need to install a booster pump to increase the pressure. 3. Check whether the ignition device is normal, and professional personnel are required to come to the door for maintenance, if they have no relevant maintenance experience, it is not recommended to operate by themselves, so as to avoid causing more serious electrical problems and increasing their own maintenance costs.

1. When installing a gas water heater, it is necessary to change the location of the natural gas meter, which can only be changed with the permission of the local natural gas company, and the personnel of the natural gas company are also required to guide the installation to avoid the danger of leakage of natural gas in the process of use.

2. The installation of gas water heater cannot be installed in a closed environment such as a wardrobe, because because the hot gas water heater needs to obtain air from the outside for combustion during operation, and then discharge harmful exhaust gas into the outdoors, so the water heater must be installed in a position with better ventilation conditions.

3. The use of gas water heaters in high-rise buildings must use a strong exhaust water heater to avoid discharging the exhaust gas of the water heater into the public flue. Because there is a large amount of oil and gas in the public flue, the exhaust gas discharged from the gas water heater is high temperature and is easy to touch the paint**.

Preparation tool: Vantage water heater.

Here's how:

1. Open the smoke pipe and check the smoke exhaust port of the machine to check whether there is a large amount of carbon deposit, the liquefied gas model is easy to accumulate carbon due to poor combustion, and it needs to be disassembled and cleaned, and the liquefied gas pressure is checked.

2. The drainage hole of the condenser of the condensing model is blocked, resulting in the condensate accumulation wheel burning in the condenser, and the flue gas cannot be discharged, resulting in E2 failure.

3. The 4th or 5th nozzle on the right side of the distributor is blocked, resulting in the flame extinguishing and E2 fault when the fire power is converted.

4. After the fan or fan starting capacitor is damaged, the wind speed does not rotate, resulting in the flame extinguishing.

4. The air inlet is blocked by foreign objects such as raw meal bags, resulting in a decrease in air intake.

5. The smoke pipe anti-backwind baffle is stuck, resulting in poor smoke exhaust.

Vantage water heater troubleshooting method:

Water, gas, electricity in any aspect of the components damage, will cause the water heater can not ignite, but now the quality of water heater components is generally improved, not so easy to break, in fact, many times the reason for the failure of fire is because of the scaling of the waterway caused by the blockage of the hot water pipeline, resulting in the waterway flow back pressure is larger, to a certain extent.

The water heater water-gas linkage device will think that the heat has been closed and the gas channel is closed, there is no gas, of course, it can't catch fire, if the hot water faucet is fully open in the near future, the hot water pressure is smaller, the possibility is greater, since the firearm is working normally, it can be more certain.

Failure of the water supply system. The nameplate of the water heater indicates the applicable water supply pressure range, and only by controlling the water supply pressure within the applicable range can a good use effect be obtained. <>