A little less how to improve virtual memory

Right-click on My Computer Properties Advanced Settings Advanced Virtual Memory to change the next point.

The virtual memory is self-set, usually 2 to 3 times that of the physical memory! My PC Right-Click, Properties, Advanced Options, Performance!

Go to "Open Control Panel System", select the "Advanced" tab, click the "Settings" button in the "Performance" column, select the "Advanced" tab, and click the "Change" button in the "Virtual Memory" column to enter the "Virtual Memory" window; Select the system drive letter in the drive list, then check the "No paging files" option, and then click the "Settings" button; Then click on the other sections, select the "Custom Size" option, set the values in the "Initial Size" and "Maximum" values, then click the "Settings" button, and finally click the "OK" button to exit.

How to set up virtual memory:

5. Next, we can set the size of the virtual memory. First uncheck the box in front of "Automatically manage all drive paging file sizes", and then we check "Custom size" as shown in the image.

6. When setting the size of virtual memory, the bigger the better. It should be set according to our actual physical memory, which is generally about multiple times of the actual physical memory. For example, my computer memory is 2G, it is recommended to set the size of the virtual memory to be between 2048M and 4096M, and after the input is completed, click the "Settings" button, as shown in the figure.

Note: 1g = 1024m

7. After the setting is completed, we can see that the virtual memory size on the C drive has been changed to the size we set. Then click the "OK" button below as shown in the image.

Note: We can also set the virtual memory paging file in other disks, such as D, E disk, etc., it is recommended to set it in C disk.

9. Click the "OK" button on the last way, and the system will remind us again that "it must be started immediately to take effect". Select Restart Now or Restart Later according to your needs, as shown in the image.

At present, there are five ways to say du on the Internet (of course, there are more than these).

1. Let the system manage its own DAO management and set it to automatic;

Version 2: I don't want the virtual right memory to change frequently, and the maximum and minimum values are set to the same value, which is 2-3 times that of the physical memory;

3. The minimum value is set to multiple of the physical memory, and the maximum value is set to 3 times of the physical memory.

-256MB maximum and minimum values are set to 2--3 times of physical memory, 256--512MB maximum and minimum values are set to multiples of physical memory, and 512MB and above maximum and minimum values are set to multiples of physical memory.

5. The minimum value is set to multiple of the physical memory, and the maximum value is determined by observation, the method is: press cyrl+alt+del to open the "Win Task Manager" at the same time, in the "Approved Usage" in the lower left corner of "Performance", check the current peak usage value, select the maximum value as the maximum value of virtual memory, remember to divide this value by 1045 to convert it to MB.

Personally, I think it's all feasible, 5 seems to be more objective, you can try that kind of setting well.

Here's how to do it: Right-click on the My Computer property Advanced Performance.

Set up Advanced virtual memory.

Change Select the partition where the virtual memory (page file) will be stored Customize the size Determine the maximum and minimum settings OK.

Pseudo-memory is computation.

When the memory storage is full, the CPU will automatically call the DAO space of the hard disk to act as memory to alleviate the memory space. For example, if the computer has 200MB of physical memory, when it occupies a 300MB file, it will use a relatively large virtual memory, and the file will be stored in the virtual memory after being read by the memory, and after waiting for the memory to store all the files in the virtual memory, the files stored in the virtual will be released to the original installation directory.

That is to say, the virtual memory is on the hard disk, and my computer right-click Properties Advanced Performance Settings Advanced Virtual Memory The change is generally larger than the original value.

Method steps.

1. Right-click on the "computer" (or.

My Computer) "-Properties".

2. After clicking "Properties", "Control Inner Panel" appears.

In the pop-up "System Properties" window interface, find "Performance" and click "Settings", and then pop up the "Performance Options" window interface.

4. In the pop-up "Performance Options" window, switch to the "Advanced" window, find "Change", and pop up the "Virtual Memory" window interface.

5. In the pop-up "Virtual Memory" window, find "Free Space" and set the "Initial Size" and "Maximum".

Correct configuration of the virtual memory BAI.

Definition: In Andu

Create a virtual memory page text during the installation process.

DAO (named "

Version features: The weight of this file is the minimum size of your system's virtual memory settings. Let's assume that the virtual memory is set to 800MB to 1600MB

Then you can see the FAQ about the file size of 800MB under your configuration drive

Remember to generally adjust to 2 to 4 times the actual memory, don't take up too much space, too small and slow.

My Computer - Properties - Advanced - Performance Settings.

Just look inside.

Right-click on my computer.

Attributes are advanced. Performance settings.

There is a change under Advanced.

Turn up the virtual.

Methods of memory:

Control Panel - System --- Advanced - Performance

Adjustments can be made here.

However, virtual memory doesn't have much to do with graphics card specificity, it just makes in-game data read a little faster.

The graphics card can occupy more memory than the original.,This can be adjusted in the motherboard's BIOS,Press the del key to enter the BIOS setting when you just boot up.,But it's all in English.,If you don't understand, don't move.,If you accidentally change the voltage.。。。 You're done with your machine!!

And this method is almost negligible to the improvement of the graphics card, and you can't feel it at all!

If you want to improve your performance, you can try overclocking software for your graphics card, such as Rivatuner, which is very good. Adding a little memory can also make the game smoother, and the memory module is not expensive now. But the best way to do this is, of course, to change the graphics card.

Set the virtual memory bai to.

The minimum value of the DUD disk is 768m, and the maximum is 1024m"

Note that this is not a point.

DAO OK, yes.

Click back on the settings on the right.

button to manually set the virtual memory.

In the default state, the system is allowed to manage the virtual memory, but the management method of the system's default settings is usually conservative, which will cause the page file to be discontinuous during automatic adjustment, and reduce the read and write efficiency, and the work efficiency is not high, so there will often be a prompt like "insufficient memory", so let's set it up by ourselves.

Right-click on the "My Computer" icon on the desktop and select the "Properties" option in the context menu that appears to open the "System Properties" window. Click on the "Advanced" tab in the window, and a dialog box for advanced settings appears.

Click the "Settings" button in the "Performance" area and select the "Advanced" tab in the "Performance Options" window that appears to open its dialog box.

In this dialog box, you can see the area about virtual memory, click the "Change" button to enter the "Virtual Memory" setting window. Select a partition with a large free capacity, check the box before "Custom size", fill in the specific values in the "Initial size" and "Maximum" columns, then click the "Set OK" button, and finally restart the computer to make the virtual memory settings take effect.

The above is Windows

How to set up virtual memory in the XP operating system.

Right-click on My Computer and select Properties Advanced - First Settings - Advanced - Change.

You can set it yourself, in my computer, there are properties...

For making BAI with Windows

2000 and Windows

XP, you can choose "

DU Control Panel System High Performance" in the "Settings Advanced Change", open the version of the virtual right memory setting window, in the drive [volume label] the default selection is the partition where the system is located, if you want to change to other partitions, first set the original partition to no paging files, and then select other partitions.

ALT+F4 patent].

According to Microsoft's recommendation (the initial value and the maximum value are set to the same value), the physical memory is 256m, the virtual memory is set to the maximum and minimum value is 512 512, the physical memory is 512m, the virtual memory is set to the maximum and minimum value is 1024 1024 physical memory 1g, and the virtual memory is set to the maximum and minimum value is 2048 2048 If the physical memory is greater than 2g, you do not need to set the virtual memory.

Copying is shameful].

Right-click on My Computer - Properties - Advanced - Performance - Settings - Advanced - Virtual Memory - Change - Custom Size - Input Data (usually multiple of the physical memory) - Settings OK.