IBM laptop bluetooth issues

Reinstalling the Bluetooth driver is more likely to solve the problem. I've also encountered Bluetooth problems, and I saw that the Bluetooth driver has been installed in the device tube, and the Bluetooth light is also on, but I can't use it no matter how I use it. I've been in the kind of situation you're talking about.

In the end, I reinstalled the driver and all the problems were solved. Do you know how to install the driver, go to the control panel to uninstall the Bluetooth, and then install it according to the installation instructions. I wish you a speedy solution to your problem!!

Either the Bluetooth is not installed, or it is not set up!

Uninstall the Bluetooth and reinstall the driver.

You have to tap on the Bluetooth icon in the bottom right corner of the screen and select"Accept a file"(Probably written like this, I use the English system, that is, I can't understand the exact words in Chinese), and then send it on your mobile phone, absolutely no additional software.

Computer, Bluetooth has a sending file and a receiving file, you have to choose which one to use.

Be sure to install mobile phone software, for example, Nokia needs to install PC suit

If you don't install software, you can only transfer from the computer to the mobile phone, not from the mobile phone to the computer.

You first make sure; whether Bluetooth really exists or is it just a model; If it really exists. You'll need to install a Bluetooth driver first'After installation. The system will start from; Then you can configure Bluetooth; These include searching; And in the lower right corner, there will also be an icon with a Bluetooth mark; After installing the driver.

Remember to turn on Bluetooth;

1. Confirm whether Bluetooth really exists or is just a model;

2. If it really exists, install a Bluetooth driver first;

3. After installation, the system will automatically start, and then configure Bluetooth;

5. After installing the driver. Remember to turn on Bluetooth;

1. Bluetooth should be turned on on both devices.

2. At the same time, it is set to "Allow to be found by other devices".

4. Connect the two devices and enter the same number, such as "5678".

5. The connection is successful, and the file can be sent.

Then you have to buy a Bluetooth adapter to use it.

If the computer is installed with IBM's own power management software (generally installed, press fn+f5 There will be a cross-section out, which has a wireless network card and Bluetooth switch.

If you have any questions, you can always post a consultation or call think product consulting services**: 8009908888 or 4006908888.

Lenovo is at your service sincerely.

Can you try it again?

You must install the driver of the official website, otherwise you can't use it, some Bluetooth is done together with the wireless network card, you'd better go to the official website to fill in the SN number of your machine, the official website will automatically find out the software and driver of your machine, good luck.

IBM notebook Bluetooth usage steps:

1. Turn on the manual switch of the notebook first (that is, move the switch to the right to turn it on), and then press FN+F5 to turn on Bluetooth.

2. Laptop and mobile phone connection:

Put the Bluetooth of the notebook in the discovered state, and then use the notebook to search, search for the name of the mobile phone, after receiving the mobile phone, there is a binding function on the mobile phone that requires password pairing, such as setting 1234, the mobile phone will also ask to enter 1234 for pairing, and the data can be transmitted after success.

3. Laptop and Bluetooth headset connection:

Turn on the Bluetooth on laptop state, and then press and hold the key of the Bluetooth headset with your hand, and when the Bluetooth indicator light is blue and red interchangeable, use the search in the Bluetooth software of the notebook to search for the Bluetooth of the headset. Right-click on it to bring up a drop-down menu, click on the pairing: in general, the pairing code is:

0000, and then OK, after the code is matched to the audio of the control panel, it is modified to Bluetooth audio.

1. Bluetooth should be turned on on both devices.

2. At the same time, it is set to "Allow to be found by other devices".

4. Connect the two devices and enter the same number, such as "5678".

5. The connection is successful, and the file can be sent.

The switch is on the keyboard, and the key with the fn+ Bluetooth icon will do.

Install the appropriate Bluetooth driver for your computer model first.

Then turn on the Bluetooth switch of the notebook and click to find the device.

At the same time, press "FN+F5" Bluetooth to start or turn off, and devices with Bluetooth can transfer data to each other, such as computers and mobile phones. That's how to use it, just a few more tries and you'll understand everything.

What kind of machine are you?

The machine has a Bluetooth indicator light.

See if it's bright.

If it doesn't light up. In the past one or two years, new machines have hardware switches for Bluetooth.

should and wireless switch.

When the same. Let's open this one.

Then turn on the software card off fn+f5

Turn on Bluetooth. If it doesn't work yet.

Install the Bluetooth driver.

It's ready to go.

A Bluetooth icon will appear in the bottom right corner.

Right-click on it and you're done.

Turn on the wireless switch.

Press fn+f5

Turn on bluetooth.

Turn on fn+f5 and turn on the Bluetooth item.

Next Driver Genie, check if yours has Bluetooth function! If so, then you can install the driver on the wizard! It should be in the bottom right corner of your computer.

1. Dial the wireless Bluetooth external switch to the right to the ON state outside the notebook to turn on the Bluetooth function.

1. Bluetooth is supported by the Bluetooth Special Interest Alliance

group, referred to as SIG). The Bluetooth SIG has more than 25,000 member companies worldwide in the telecommunications, computer, networking, and consumer electronics sectors. The IEEE lists Bluetooth technology as IEEE

However, this standard is no longer maintained.

2. The Bluetooth SIG is responsible for supervising the development of Bluetooth specifications, managing certification projects, and safeguarding trademark rights. A manufacturer's device must comply with the Bluetooth SIG standards in order to enter the market under the name "Bluetooth device". Bluetooth technology has a patented network that can be issued to standards-compliant devices.

1.Try this: right-click on the computer icon and select "Manage", then select "Services and Applications" - "Services" - find Bluetooth Service, Bluetooth Support Service, Print Spooler Service, double-click on these services to open, and set these three services to "start" or "automatic".

2.If the notebook does not turn on the Bluetooth switch, the default is not to find the Bluetooth device, the Bluetooth switch and the wireless switch are a shortcut key, depending on the model, you can find it in F1-F12, my Acer notebook is pressed FN+F3, you can find the Bluetooth device after turning on Bluetooth. The computer opens this path control panel Hardware and sound devices and printers, click Add Device, then Bluetooth will start to search for Bluetooth devices, when the display of devices is displayed, click on it, and follow the steps to connect.

The Acer V5-471G notebook I use, the Rapoo S500 Bluetooth headset is used for Bluetooth connection, the head-mounted version, the sound quality is good, it feels good to listen to songs, it is also comfortable to wear lightly, and the battery life is also very strong.

After installing hotkey, it is installed by default at the factory, fn+f5