iPhone5 unlock card write card, iphone5 how to cut card

Since Apple's iphone5 mobile phone uses a thinner and smaller new type of nano-SIM card, many friends think that they can only change the card, that is, if you use the previous SIM card, then you need to change the card, of course, we can also cut the SIM card to meet the needs of the iphone5. The following is the iPhone 5 nano-SIM card cutting tutorial successfully realized by domestic cattle, interested friends may wish to learn from it.

First of all, before cutting the card, we need to know the length and thickness of the nano-SIM card, and the more accurate data found from the Internet is as follows:

The length and width of the nano-SIM is 12x9mm, which is 30% smaller than the current micro-SIM (15x12mm) and 60% smaller than the mini-SIM (25x15mm). And in terms of thickness, it will be about. Since it is smaller and thinner than traditional micro-SIM cards, we need to find a way to achieve it.

The nano-SIM size is 12x9mm

As the nano-SIM card has become more fine, it is difficult to meet the requirements by using the way we used scissors to cut the card roughly, and the thickness of the card has also been reduced, and the scissors are weak in terms of thinning, so some people here have come up with the idea of using sandpaper to grind the SIM card to meet the needs of the nano-sim, and the following are some things that should be paid attention to:

Since the SIM is relatively large at the beginning, it is also easier to operate, so it is recommended that you first grind the SIM card thin, pay attention to the grinding card is to grind the reverse side (non-metallic side), do not grind the front, otherwise the SIM card will be reimbursed, and pay attention to measuring the thickness, grinding to the thickness of the standard nano-sim.

Use sandpaper to thin the SIM card.

When cutting the card, because the SIM card is larger at the beginning, we can first use scissors to cut the card as small as possible, and then use sandpaper to smooth and grind it to the size of the nano-sim, that is, the size is 12x9mm, as shown below:

The end result. In the end, we use scissors and sandpaper to achieve the SIM card cut card to meet the needs of the iphone5 mobile phone card, the overall is not too troublesome, mainly some basic size calculations and careful operation, of course, you buy the iphone5 later, you need to change the card, if you feel that the card is troublesome, you can go directly to the network operator such as China Mobile or Unicom to change the nano-SIM card, interested friends may wish to learn.

This answer is kindly provided by [Xie Xiaofu]! If there are any shortcomings, please understand, I hope this answer will be helpful to you! I hope you will give a [], thank you here! I'll see you next time!!

Just use the iphone5 card cutter to reduce it.

If it's a big card, some of the chips outside will also be lost, and it's okay.

Take it to sell apples**, and the waiter will know.