-
Anonymous users2024-02-07ASK: You're talking about the scrollbar getting stuck in the scroll bar for four or five seconds, and then the screen flashes, and then it passes, and the fan speed goes down.
answer：
That's it for my machine, and today it was finally solved.
Your machine must be no problem when you first buy it, because the merchant installed the most matching driver according to the machine's hardware, and now the card is caused by the driver that does not match the hardware or is not compatible with the hardware when the system is reinstalled later.
Solution: Uninstall the existing driver, install the driver with the included driver CD, if there is no CD or can not solve, please install the software driver life, or to.
If necessary, you will also need to install the motherboard driver, note: install the motherboard driver before installing the other drivers.
I've tried reinstalling the system before but it doesn't work.
The above is only a solution to the problem described in the first sentence.
Frankly, 70% of the soso is wrong! They're too one-sided and untargeted. Or someone just wants to earn points.
Many questions have to be tried and explored by yourself to really understand!
-
Anonymous users2024-02-06If it's not the CPU overheating, it should be the motherboard, and you can go to the repair computer to check it.
-
Anonymous users2024-02-05Two things: one is to change the memory, and the other is to change the power supply.
-
Anonymous users2024-02-04It should be that your motherboard and your graphics card are not suitable for matching, you can try the compatibility of the motherboard or graphics card.
-
Anonymous users2024-02-03System problems or motherboard problems.
-
Anonymous users2024-02-02Now, there should be a lot of friends who use the win7 system. Of course, some friends are asking, and when the device is turned on, it is not the familiar boot animation that appears, but the green scroll bar appears'What should I do? Below,I'll introduce to you what to do if the win7 system boots up is a scrollbar,Friends who want to know about it will take a look at it together。
The first reason: the system language is set incorrectly. The solution is as follows:
1.Click on the menu, find the command prompt in the program, and right-click to run as administrator. If the prompt in Figure 2 below appears, we can directly click "Yes".
2.In the pop-up command prompt window, we manually type bcdedit, click enter, and then check whether the language corresponding to the locale under Windows Startup Manager and Bootloader is the same as our system language. If not, enter the bcdedit setlcale zh-ch command and press enter as shown in Figure 2 below.
The second reason:The resolution setting is lower than 1024x768, this will happen, 1024x768 is the basic resolution of the computer now, if it is lower than this setting, then there will be an abnormal situation when the computer is turned on, if this is the reason, the solution is very simple, just modify the resolution.
-
Anonymous users2024-02-01Recently, some users said that the win7 system boot scroll bar has been circulating, unable to enter the system of the bucket start and slow system, why is this happening? In general, win7 has two reasons for this problem, one is that the driver, service and update conflict with the system configuration file, and the other is the bad sector of the hard disk. After knowing the cause of the empty mode failure, let's take a look at the solution of the win7 system boot scroll bar has been looping.
Recommended:
Here's how:
1. First press F8 to enter the safe mode at boot frenzy;
2. Delete all the newly installed drivers and newly started services in the last half month. Open the control panel and uninstall it. Sort by time;
3. Then press the win+r shortcut key. Open Run;
4. Enter msconfig to open the configuration window.
5. Cancel all applications that are not related to the system. Then reboot;
6. If it can be started, then it means that it is a soft problem. Of course, the hard drive problem is that the hard drive has to be replaced. If it still can't be started, continue to enter the safety mode side-by-play mode. Start Menu - System Tools - System Restore;
7. Try to find the restoration point before January and make sure. The system goes through two reboots.
The above tutorial helps you solve the problem that the scroll bar of the win7 system has been looping at boot, and after a simple setting, the win7 system will return to normal.
1) Lhasa is located on the Qinghai-Tibet Plateau, with low latitude, high terrain, thin air, large daily temperature difference, strong solar radiation during the day, which promotes warming, and weak atmospheric inverse radiation at night, which promotes cooling. The annual range is small, in summer, the high altitude makes the temperature low, and in the winter, the low latitude makes the sun not low. So the answer is c. >>>More
Imba mode has no love.,It's best to get out of the aster and the sheep knife.,Attack and then out of a dark extinguish As long as the void flickers, first ast him and open the wind.,Then sheep him.,Attack him.。 >>>More
Once powered on, press and hold"delete"Don't put it, change the settings to start from the disc (don't tell me I can't change it), and then, it is recommended to buy the "Computer Junkie" magazine (with CD), put the disc into the CD drive, restart, run from the CD, and you can use the antivirus software that comes with it to disinfect the virus. (This is more thorough, I used to have a similar experience, not advertising for "computer junkies" magazine). >>>More
The image of the quadratic function intersects below the y-axis and the x-axis, i.e., when x 0; y c 0 error. >>>More
Reinstall the system, or maybe the C drive has garbage to clean up.