WLAN has a password, the mobile phone can t be connected, the computer can be connected, what s goin

There are several scenarios in which the phone cannot connect to Wi-Fi properly:

1) The wifi signal is set to hidden, you need to contact the network management to obtain the wireless signal name, and manually enter the wireless signal name and password connection in the mobile phone [Settings] - [Wireless LAN] - [Other Networks].

2) If the router is faulty, try to restart the router.

2. Prompt that the connection to the wifi is refused, and the fault phenomenon: others can be connected, but they can't connect to the wifi, and the connection is refused. Here's how to fix it:

1) The router device may have enabled wireless MAC address filtering, it is recommended to contact the NMS to add the MAC address of the mobile phone. The MAC address is viewed in [Settings] - [About This Mac];

2) If the router is faulty, try to restart the router.

3. The mobile phone connection to wifi prompts that it has been saved, but the connection fails. Here's how to fix it:

1) This prompt indicates that the encryption method, password or signal channel of the router of the wifi signal has been modified. It is recommended to reset the password and encryption type of the router, and the terminal connected to this network needs to [Ignore this network], and re-enter the password to connect.

2) If the router is faulty, try to restart the router.

If the router is added to the blacklist, it will not be connected, and if your computer system is win7, you can make a hotspot to use by yourself.

1. Run the command prompt as an administrator

The shortcut key win+r enters cmd and enters.

2. Enable and set the virtual wifi network card

Run the command: netsh wlan set hostednetwork mode=allow ssid=mywifi key=123456789

3. Set up Internet connection sharing

In the "Network Connections" window, right-click on the network connection that is connected to the Internet, select "Properties" "Sharing", and tick "Allow Others..." Connect (n)" and select "Virtual WiFi".

4. Turn on the wireless network

Continue running in the command prompt: netsh wlan start hostednetwork

It is normal for the mobile phone to receive a signal that is not as good as the computer, and then connect when the signal is good.

If the mobile phone is not connected to the Internet, you can check the following two buried situations:

Step 1: Check if there is a problem with your phone.

1. Check whether to turn on airplane mode, if it is airplane mode, then it will definitely not be able to connect to the wireless network.

2. Check whether the mobile phone is short of power, sometimes it is impossible to connect to the network due to lack of power.

3. If it is not the above 2 reasons, then take your mobile phone to the closest place to the router and try it.

4. If it doesn't work, then restart the phone and see if it can connect.

5. If it still doesn't work, open the wireless network settings and advanced settings of the mobile phone, and adjust the WLAN hibernation setting to "never".

Step 2: Check if there is a router problem.

1. Check if the password of the router has changed, causing the phone to be unable to connect?

2. Check the indicator light of the router to see if it is disconnected.

3. Then open and look at the settings, is there any wireless cancellation?

4. Restart the wireless router and see if it is resolved.

Step 1: First of all, check whether the router is connected to the external network, log in to the router management interface, and see whether the WAN port parameter is non-0 at the running status - WAN port status, if it is 0, please set it again according to the router quick settings.

Step 2: Manually set the IP static address; Press and hold the signal name of the corresponding wireless router and select Modify Network.

Step 3: Select Advanced Settings.

Step 4: Click IP Settings and select Use Static IP

Step 5: Enter the IP address manually

If you can't connect to the WiFi network with your vivo phone, you can check the following information:

1. Check whether the wifi password is correct.

It is recommended to click when entering a password"Eye icon"to display the password and make sure that the password is correct.

2. Reconnect to WiFi

Please go to Settings --WLAN, click on the wifi you need to connect to, and click"Forgot Network Forgot password"reconnect.

3. Check whether the wifi network is normal.

Please compare whether the same wifi connection is normal with other mobile phones, and confirm whether it is the wifi or mobile phone. If it is Wi-Fi, please restart the wireless router.

View. At the same time, you can enter the router management interface to check whether there are special functions set: Sakura does things such as the number of connections limit, MAC binding, and Internet time management.

Wait. 4. Reset network settings.

You can go to Settings - System Management - Backup & Reset - Reset Network Settings - Enter the lock screen password.

Note: Resetting network settings resets Wi-Fi, mobile data, and Bluetooth connection records.

5. Reset all settings.

Back up your data. After that, go to Settings - System Management - Backup & Reset - Restore all settings and follow the on-screen prompts.

Note: Restore all settings will not be deleted to remove any data or ** files, only all settings of the phone will be restored, and some of the third banquet application accounts need to be re-logged in, please make sure that the spine does not affect the use of the software before operating.

There are only three possibilities:

1. The computer does not turn on the wifi, or the computer wireless network card is broken, or the network frequency band is not compatible, the mobile phone may be relatively new, the computer is only, and the wifi is only 5G and the like.

2. The lease period of the computer has expired, and you have not re-online, the solution is to turn off the computer wirelessly and turn it on again, disconnect it and reconnect it.

3. WiFi is limited to your MAC code, find the administrator to check the wireless routing settings.

Mobile phones can be on, and it's all over to share the mobile phone network to the computer.

Why can't I connect to the wireless network that my mobile phone can connect to, and it says that the password is wrong?

There can be a variety of reasons for this situation, not necessarily a password error, here are some possible reasons:1Insufficient Signal Strength:

It may be that the computer is located too far away from the Wi-Fi router, or there is an obstacle in the middle that interferes with the signal, causing the computer to be unable to connect to the Wi-Fi network, while the mobile phone can connect because the mobile phone has better antenna performance. 2.Computer network card problems:

It may be that your computer's network card does not support Wi-Fi connection, or the network card driver is not compatible with your operating system, resulting in the inability to connect to the Wi-Fi network. 3.Wi-Fi Router Setup Issues:

It may be that the Wi-Fi router's wireless network settings are incorrect, the password may be incorrect, or the security type may not match, causing the computer to be unable to connect to the Wi-Fi network. It is recommended that you check the settings of your Wi-Fi router and make sure it meets your needs. In summary, it is recommended that you first try to move your computer to a location with better signal strength or use a network cable, and then check the settings of your computer's network card and Wi-Fi router.

If the problem persists, refer to your device manufacturer's documentation, or seek technical support.