Installation tips? Are there any special precautions?

Points and tips for the installation of the set door.

1.Proofread the holes.

Whether the size of the opening meets the installation requirements, and the necessary treatment should be given if it does not meet the requirements.

2.Unpacking. Check whether the door frame, door sleeve line, door barrier strip, sealing strip, and parts are complete.

3.Assemble the door frame.

When the door frame is assembled, the overlap between the mullion and the transverse frame must be glued and then fixed with self-tapping.

4.Position the door frame.

The door frame is in place according to the indoor elevation line, first clamp the door frame from the perimeter of the door frame with a wooden wedge, and then support the door frame from the inner mouth of the door frame with tooling and a wooden wedge, and adjust the verticality, levelness and inner diameter size of the door frame by clamping the inner and outer wooden wedges of the door frame, so that it meets the design requirements (the gap between the door frame and the door leaf, and the door leaf and the ground are 5-8mm).

5.Glue filling of door frames.

Before filling the styrofoam between the door frame and the wall, the wall should be cleaned first, the wall should be moistened with a watering can, and the styrofoam should be filled.

6.Install the door sleeve wire.

After 4-6 hours of styrofoam curing, remove the tooling and wooden wedge, apply glue in the door frame socket, and then embed the door sleeve line into the door frame, and gently knock and compact to make the door sleeve line and the wall fit tightly.

7.Install the door leaf.

Pay attention to the opening direction of the door, install hardware, and the gap between the door leaf and the door frame meets the design requirements to ensure that the door leaf is open and closed flexibly.

It's best to find a manufacturer with a good reputation! Like Roland! It will be installed at home! It's a little bit better!

Generally nothing.,Just don't take out the system disk when you restart the machine after installation.,Otherwise, you won't be able to install the driver.。

<><What are the precautions for installation?

The whole house is customized, but don't step on the installation and overturn!

After a long process of selecting plates, colors, styles, and merchants, the final order was placed, and the mental journey was quite considerable.

There's a story! Finally, the installation time was determined, and it was not easy to wait for the whole house customization, but don't step on the installation step.

Big pit, no matter how busy you are, you must be Xiang Mu Lu staring at the scene, and it takes three whole days to know that these details in the installation are too heavy at home, special.

Don't be the last one, it's related to whether your home customization can be perfectly landed.

Point 1: The relationship between the laminate and the backplane should be reinforced

It is necessary to remind the installation master that each laminate and the backplate (5mm-9mm thickness of the backplate, the movable laminate can ignore this problem) should be reinforced separately, and the screws should be screwed onto the laminate from the back panel of the cabinet to prevent too many products from being placed in the later stage, the weight is piled up, and the laminate is sinking and deformed.

Point 2: Check whether the upper, lower, left and right cabinets are flush

The purpose of this is that the cabinet is flush, and the cabinet door will be flush up and down in the later stage, which leads to many reasons for the unevenness of the cabinet, such as the ground, the wall, and the top gypsum line blocking, etc., tell the installer to find a way to solve these problems.

Point 3: The position of the voltage regulator of the ammonia surrounding light strip should be reasonable

If there is a light strip in the shelf, you must think about the location of the voltage regulator in advance, and my house is placed in a cabinet with entities.

surface, if you need to repair and replace it later, you can open the cabinet door.

Point 4: Before installing the cabinet door, confirm whether it is a ** device or a handle

Before installing the cabinet door, you must communicate in advance what are the cabinet doors that need to be installed with a ** device and a handle, otherwise relying on the master's memory alone, there will be a possibility of overturning, for example: two holes are drilled in the cabinet door with a ** device, ready to install the handle.

Point 5: Be sure to ask the master to paste the decorative stickers of the connectors

There are three-in-one connectors to link between the plates, there will be countless small holes, which affect the appearance, and there are special beauty stickers, so let the master paste them after the installation is completed.

Here are some installation tips to save you from unnecessary hasslesWhen we decorate, it is our most important thing, because decoration is our most important thing, the renovated house may be with us for a lifetime, and the children of future generations will still use it. When we want to install, we must determine our own style to avoid trouble, and after determining our own style, we can go directly to the materials and furniture we want to buy, which can save energy, and can also save money, will not waste money, and do not know the style of their own decoration, it will also waste time. <>

As for us, we must find a professional master to install it when we install it, so that we can avoid stepping on the pit, and the quality of the installation master's installation will be better, because they are professional. When we install wallpaper, we must also buy the most environmentally friendly wallpaper, so as to ensure our safety in the later stage, and if you buy the wallpaper, if you don't like it later, it is very troublesome to dismantle, so you can install a little better at the beginning of the installation. <>

When you design and find a construction team, you must discuss with the masters often, tell them the style you like, and then let them follow up your own style to do it, correct some of yourself, it will not be troublesome and the plan of the big design company is also very good, but they will spend more money. <>

When we install the floor, the floor must be selected, because cutting can reduce waste during installation, and the remaining floor tiles can also be glued under the cabinet, which will save a lot of money and will be very convenient. When installing sockets in the kitchen and bathroom, we must install more, because the kitchen is a place where the most large electrical appliances are used. When choosing furniture, we should also compare more than a few stores, because the most important thing we buy furniture is environmental protection, so we try to avoid the above things when installing, so it will not cause a lot of trouble.

Installation tips for the bedroom: the ceiling light needs to be installed with dual control, and it will be much more convenient to install it at the head of the bed and next to the opening and closing doors.

The wardrobe is stored as much as possible, and the little beauties should remember to reserve enough hanging space for coats and dresses.

Newlyweds should reserve a place for their baby's crib in case of future changes.

The first is to read the installation guide carefully before installation, and the second is to install from large to small during the installation process, first determine the basic framework, deal with the details, and do not install blindly.

What are the dismantling and attention points of the computer Minling installation software?

1. When installing the software, if the antivirus software and system security software have prompts, you must select Allow operation and release, otherwise the software will not start and function abnormally.

2. After the software installation is completed, a system service will be generated, which is the driver of the dongle, and the antivirus software and 360 software can not be deleted and cleaned up. If you get a message saying that the dongle driver is installed incorrectly, please close 360 and other anti-virus software, and then go to Start Menu -> Bug Software > Repair Dongle Driver.

3. After the software is started, you can see 3 related processes in the task manager, which are and have been running, please do not end these three processes, so as not to affect the normal operation of the software.

The online ** software must match the ** you opened an account, go to your ** firm.

Installation site documentation Beware of viruses.

What are the precautions for installing software on my computer?

Pay attention to 6 points in the decoration of new houses: 1. Design the style of the house first; 2. Hard installation should be determined and then installed; 3. The decoration of the living room should consider the placement of furniture and household appliances; 4. The ceiling light in the bedroom is equipped with dual control, and the corridor is equipped with voice control; 5. Kitchen gas alarm, sink away from stove socket; 6. Leave a certain slope on the balcony and bathroom to install floor drains.

To choose a regular decoration company, don't look for a roadside engineering team, there is no guarantee for after-sales.

Cabinet installation. 1) The hinges should be used well, and now the cabinets are all buffered hinges, which will be slow when the door is closed.

Slow approaching will not ring, the hinge is not good, and it will take a long time. The door panels are crooked and unsightly.

It is also inconvenient to use.

2) The bottom of the basin cabinet must be a waterproof vertical cabinet, and the PVC cabinet can be kept in water at any time.

It's fine. 3) There should also be a backing board under the countertop, in order to make the countertop smoother and firmer.

4) Quartz countertops should be used, which are not easy to crack or scratch.

5) There is also a basin faucet should also be used well, those who have used the cabinet know, the basin.

A leaky faucet is troublesome.

Ceiling mounting. 1) The concealed project should be done first.

Problems such as the installation position of lamps and lanterns must be clarified in terms of location, otherwise they can only walk the bright line in the future, which will be affected.

Beautiful. 2) Suspended ceilings in kitchens and bathrooms.

It must be easy to clean, and it must also be moisture- and corrosion-resistant. Usually the gusset is used to make a full hanging.

Top. 3) Safety should be ensured.

The ceiling must be firm, otherwise it will hurt people or smash items if it falls.

Toilet installation. 1) Squatting in the pit to change the toilet, first measure the distance from the center of the drain to the wall. Buy a horse according to this distance.

Bucket. Don't buy the so-called squatting toilet for sitting, pick a siphon toilet with a suitable hole spacing.

2) Before installing the toilet, be sure to test whether the sewer pipe is unblocked. Solution: Fill a bucket with water.

Quickly pour the whole bucket into the sewer, pay attention to see if the water level in the sewer is not**. If there is.

**It must be thoroughly dredged first. No** is qualified.

3) Do not seal the screw holes on both sides of the bottom of the toilet bowl during installation. There is no need to install any exhaust.

Hole. The screw holes can be vented.

4) If possible, it is best to go downstairs and replace the sewer pipe with a direct elbow. Squatting pit use.

It is a trap. It is not good for toilet drainage. That way, you don't have to do the second work of drafting.

5) If the pipes are not replaced, please note: some people will flush less in order to save water, so that.

It is easy to cause aging or blockage of pipes.

I have lived in Changchun for more than 10 years, during which I have also renovated, my friend has Yuanzhou and lily, I personally think that Yuanzhou's hydropower project uses a WAGO connector, although the technology is very advanced and saves workers a lot of trouble, but I think there is no traditional tin hanging process firmly, I don't believe you can pull hard to ensure that it is broken.

Lily real estate company materials are Changchun local, I think it is not very reliable, in addition to my friend said that the later increase in the project, our own home decoration are hoping to spend less money to do big things, the early collection of less and then make up for the later period, in fact, there is no purpose to save money at all. I don't think it's reasonable.

My own home was renovated last year, I am the owner of Lakeside Eslite, I chose to decorate today, there is no addition in the later period, the materials are distributed in Beijing, and the designer and foreman are very responsible.

My designer's surname is Hao, and my name is inconvenient to disclose. Hopefully.

Decoration and installation is such as a strict and meticulous work process, including measurement, design, construction and many other details must be tightly fitted, even if we do not have to do it ourselves, but grasp the key points of installation, in the process of installation of workers on the stove oak can play a role in supervision, so as to safeguard their own rights and interests. It is advisable to choose some of the bigger ones!