The CAD file opens and shows that the memory is insufficient

It's your C disk space is too small, clean up the files on the desktop, and the CAD diagram is too big, the word document can't be displayed, use a screenshot of the desktop, and put it into the word in the form of **Or right-click to open the way and open it with word.

One is the method of CAD in Word: set the background of CAD to white, and then shrink the CAD window to the size of the graphic you want to copy, just enough to accommodate it, otherwise there is a big blank space in Word, and then, copy, select all the lines in the drawing, right-click. Paste into Word.

The second is to convert it to a WMF file first, and then reduce the window as above, and then, press emport, select the line, and save. Word, insert, graphic, from, file, find the file and you can insert it.

1. The file may use the 3D part of CAD, which has a large amount of data, and the machine configuration will be more difficult to deal with.

Second, optimize the system, the next Windows optimization master, deal with the system redundancy, maybe run faster.

3. The object file you want to open may have been opened or made with a CAD version higher than 2004, resulting in 04 not being opened.

4. Send me the file to see if you can open it.

Check & Fix:

In many cases, it is necessary to import AutoCAD format drawings copied from other computers, and such drawings will cause errors and exit when they are modified or other operations are made.

The solution to this problem is to open the Drawing Utility in File and select the Check command in it, which will fix some of these errors. If the AutoCAD diagram cannot be imported smoothly or there are some defects after importing, you can use the recover tool to open the "Repair" under "Drawing Utility" in the file, and then select the folder that needs to be repaired to repair it.

Summary. 1.Due to the high performance of CAD software for computer hardware, if the computer configuration is too low, it will show that the memory is insufficient or cannot be started;

2.For 64-bit AutoCAD 2014, configuration requirements: Windows 8 Standard, Enterprise, Professional, Windows 7 Enterprise, Ultimate, Professional or Home Premium or Windows XP Professional (SP2 or later) AM with SSE2 technology....

3.Among them, the RAM at 3 o'clock is the memory that shows insufficient memory, that is, the running memory, and the running memory of the computer will show insufficient memory if it is 2 4GB, so it is recommended to buy a memory module to increase the RAM, that is, the running memory; It is recommended to increase to 8GB or more.

Why does CAD show that there is insufficient memory when it is opened?

Hello, I am helping you to inquire about the relevant information and will reply to you immediately.

1.Due to the high performance of CAD software for computer hardware, if the computer configuration is too low, it will show that the memory is insufficient or cannot be started; 2.For 64-bit AutoCAD 2014, configuration requirements:

Windows 8 Standard, Enterprise, Professional, Windows 7 Enterprise, Ultimate, Professional or Home Premium or Windows XP Professional (SP2 or later) AM with SSE2 technology....3.Among them, the RAM at 3 o'clock is the memory that shows insufficient memory, that is, the running memory, and the running memory of the computer will show insufficient memory if it is 2 4GB, so it is recommended to buy a memory module to increase the RAM, that is, the running memory; It is recommended to increase to 8GB or more.

The steps to solve the problem are as follows:

1. First of all, when we draw, try not to draw too many graphics at one time, because the file size is too large and will occupy more memory.

2. For complex graphics, be sure to separate multiple layers for drawing, and try not to show all layers.

3. Pay attention to the computer do not open redundant software, try to let the computer only run CAD, and close the software that is not necessary to open, reduce the running load of the computer and improve the performance.

4. We can also add a memory module to the computer to improve the running memory of the computer.

5. It is also necessary to pay attention to the saved graphics at any time, in case the computer software does not respond due to insufficient memory, resulting in the loss of good files.

When using CAD,If fatal errors occur frequently, the CAD data can be protectedto solve this problem and ensure that the CAD runs normally.

7. Finally, you can see that the CAD has been added, click [Apply] and then click [OK], save the settings, and you can solve the problem of frequent fatal errors in CAD, as shown in the figure.

It is possible that the image was generated with Tianzheng or other software.

How did you solve this problem?

"When opening CAD, it prompts an error and insufficient memory is closing" I don't know how to solve it, help.

Can you tell me how to fix it? I also came across.

I'm also in this situation now, how did you solve it, can you please ask me?

It is estimated that this CAD file is corrupted, and you can press to process:

1.Open the CAD program directly, 2Again: File - Drawing Utility - Repair.

3.Select this file.

Wait for the fix to be opened and see if it can be processed successfully.

If not, please send me this article and I'll try.

1. First of all, you need to open CAD.

2. Find the format in the menu bar.

3. Find the scaled list or enter the salelistedit command.

4. Click the reset button in the annotation ratio dialog box.

Notes:In addition to computer mainframes and peripherals in general, computer-aided design primarily uses graphical input and output devices. Interactive graphics systems are especially important for CAD.

The general function of a graphic input device is to feed the coordinates of a point on a plane into a computer.