The latest quotation of aluminum alloy cable tray?

Aluminum alloy bridge has high performance such as corrosion resistance, wear resistance, waterproof, etc., which directly replaces the performance of steel bridge and spray bridge, and the service life is more than 5 times that of steel bridge. The density of aluminum alloy sheet is low, and compared with steel material, the structural weight is reduced by more than 50%, and the installation is easy. (The fuselage of an airplane, the body of a supercar.)

and so on are made of aluminum alloy, the performance of which I believe needless to say) lies in the comparison of other materials, the weight of aluminum alloy is the lightest, and the lightweight shell is faster to install.

Specification: 80*60;Thickness; Yuan meters.

Specification: 150*100;Thickness; Yuan meters.

Specification: 200*100;Thickness; Yuan meters.

1. The bridge ladder rod adopts an overall square structure, the thickness is not less than, and the spacing of the ladder rod shall not be greater than 225mm.

2. Material requirements and standards.

a.The aluminum alloy cable tray should be made of high-quality aluminum alloy, which meets the requirements of the CECS106 aluminum alloy cable tray technical specification.

b.The aluminum alloy profiles for aluminum bridge shall comply with the provisions of the alloy grade LD-31 (6063) in the GB T5237-93 standard, the ** shape is T5 (RCS), and the accuracy level is ordinary level. （*

c.The aluminum alloy plate for the aluminum bridge shall conform to the aluminum alloy plate of grade 5052 (LF2) in GB10569, and the ** state is O(M).

or hx4 (y2). （

Aluminum alloy tray is a cable tray that uses aluminum alloy as raw material for production.

Common specifications and sizes of aluminum alloy bridge frame:

Width 150 x Height 150 x Thickness; 60/m

Width 200 x Height 150 x Thickness;

Width 250 x Height 150 x Thickness;

Width 300 x Height 150 x Thickness;

Width 350 x Height 150 x Thickness;

Width 400 x Height 150 x Thickness;

Width 500 x Height 150 x Thickness;

Aluminum alloy cable tray one meter**:

Specification: 80*60;Thickness; Yuan meters.

Specification: 150*100;Thickness; Yuan meters.

Specification: 200*100;Thickness; Yuan meters.

Specification: 300*100;Thickness; Yuan meters.

Aluminum alloy cable tray has excellent high corrosion resistance, suitable for power plants, chemical industry, petrochemical and other fields, especially suitable for old places with high corrosion environment with the first spike.

The ladder edge and rungs extruded by the aluminum Chunqinsheng alloy cable tray make the appearance of the bridge smooth and clean, and the reasonable processing technology and connection method make the bridge easy to install, and the large-span disc straight through can meet the bearing capacity of 6 meters.

Aluminum alloy disc base plate, as required, can be flat structure or embossed stamping structure.

<> aluminum alloy cable tray is usually made of 1060 pure aluminum plate.

200*100*yuan.

300*100*yuan meter.

Aluminum alloy trough bridge has high performance such as corrosion resistance, wear resistance, waterproof, etc., which directly replaces the performance of steel bridge and spray bridge, and the service life is more than 5 times that of steel bridge.

There are many different specifications and thicknesses of aluminum alloy bridges, which should be chosen according to your needs.

The following is a **reference for the commonly used aluminum alloy bridge:

80*60 aluminum alloy bridge; wall thickness; Yuan meters.

100*50 aluminum alloy bridge; wall thickness; Yuan meters.

150*100 aluminum alloy bridge; wall thickness; Yuan meters.

200*100 aluminum alloy bridge; wall thickness; Yuan meters.

Aluminum alloy cable tray one meter**:

Specification: 80*60;Thickness; Yuan meters.

Specification: 150*100;Thickness; Yuan meters.

Specification: 200*100;Thickness; Yuan meters.

Specification: 300*100;Thickness; Yuan meters.

Aluminum alloy cable tray is directly manufactured and produced from aluminum alloy plates, aluminum alloy cable tray is divided into two types: 1060 aluminum alloy bridge, anodized aluminum alloy bridge, 1060 aluminum alloy plate aluminum content is as high as more than 100%, and Yangbi disturbs the anodized aluminum alloy cable tray, which is processed on the basis of aluminum alloy cable tray and then processed anodized surface treatment, in popular terms, anodized aluminum is orange clear refers to the surface of aluminum and aluminum alloy coated with a layer of dense alumina in order to prevent further oxidation, corrosion resistance, Strong durability and improved surface hardness and wear resistance of aluminum alloys.

Aluminum alloy cable tray material: 1060 aluminum alloy, anodized aluminum alloy.

Aluminum alloy cable tray model types: aluminum alloy trough type, aluminum alloy ladder type, aluminum alloy tray type.

Aluminum alloy tray specifications:

Width 40 * height 40 * thickness 1mm; 19 meters.

Width 60 * height 60 * thickness 1mm; Rice.

Width 80 * height 80 * thickness 1mm; Rice.

Width 100 * Height 100 * Thickness 1mm; Mi Cheng Wu Dan.

Note: Due to the large number of specifications, not all of them are listed, the above are some commonly used specifications unit price, according to the requirements of special sizes can be made.

Aluminum alloy cable tray is a cable tray produced by aluminum alloy stool, mainly there are several kinds of 1060 aluminum, 6063 aluminum and so on. The aluminum alloy bridge is more commonly used in the laying of data center cable tray, and the aluminum alloy bridge bend frame has the characteristics of beautiful appearance, simple structure, unique style, large load capacity and light weight compared with other bridges. And in addition, the aluminum alloy bridge also has anti-interference and anti-electromagnetic interference.

1. Aluminum alloy cable tray generally has the following specifications according to length and width:

Length 50mm and width 50mm

<> length 100 mm, width 50 mm or length 50 mm, width 100 mm, length 100 mm, width 100 mm

2017 cable tray national standard thickness.

The width of the cable tray < 100, the standard thickness needs to reach 1mm100, the width of the cable tray <150, the standard thickness needs to reach 150, the width of the cable tray < 400, the standard thickness needs to reach 400, the width of the cable tray <800, the standard thickness needs to reach 2mm800, the width of the cable tray <1200, the standard thickness needs to reach the jujube celery.

Aluminum alloy tray is a cable tray that uses aluminum alloy as raw material as raw material for production. Especially suitable for places with high corrosion environment, extruded ladder edges and rungs make the appearance of the bridge smooth and clean, reasonable processing technology and connection methods, so that the bridge installation is convenient.

Aluminum alloy trough cable tray is a trough cable tray produced by aluminum alloy, and the trough cable tray is generally a closed cable tray, which can directly replace the performance of steel cable tray and sprayed cable tray, and has high corrosion resistance.

Aluminum alloy ladder bridge is a ladder cable tray produced with aluminum alloy material, and ladder bridge is also called ladder cable tray. Aluminum alloy ladder cable tray has the performance of corrosion resistance, wear resistance, waterproof and long service life, the shape is unique like a ladder, and the middle is equipped with a crossbar reinforcement support to make the weight of the letter bureau light, low cost, strong bearing capacity, good air permeability, the weight of the aluminum alloy plate is very light, easy to transport and install.

Aluminum alloy tray bridge, it is suitable for the laying of large diameter cables, especially for the laying of high and low voltage cables with large loads. Tray cable tray is one of the most widely used in petroleum, chemical industry, electric power, light industry, television, telecommunications, etc. It is suitable for both the installation of power cables and the laying of control cables.

Usually the grip models of cable tray are divided into: trough type, tray type, and ladder type.

The different materials of the cable tray are divided into: galvanized tray, stainless steel 304 tray, aluminum alloy 1060 tray.

The surface treatment process is divided into: fireproof baking paint, electrostatic spraying, hot-dip galvanizing (hot-dip galvanizing) Common specifications are: (width * height * thickness is: national standard thickness) cavity file celebration.

300mm*100mm*

400mm*100mm*

500mm*100mm*

600mm*200mm*

800mm*200mm*

1000mm*150mm*

1200mm*200mm*, etc.

80*60 steel cable tray; wall thickness; Yuan meters.

<> bucket code 100*50 steel cable tray; wall thickness; Yuan Bimi;

150*100 steel cable tray; wall thickness; Yuan meters.

200*100 steel cable tray; wall thickness; Yuan meters.

300*100 steel electro-pneumatic hail cable tray; wall thickness; Yuan meters.

Metal cable trays of different materials** will also be different.

The lower ruler is a one-meter unit price reference for the gold liquid slag cable tray

100*50 metal cable tray; Thickness; Yuan meters.

400*100 metal cable tray is quiet; Thickness; Yuan meters.