-
The principle is the same, please take a look.
The phone you're using is a lithium-ion battery. Because my company is also making lithium batteries, I can help you answer this question.
Correction of misconceptions with new battery activation and 12-hour charge.
In many places on the forum, such statements are seen and seem to have become classics. But truth becomes a fallacy if it is left by certain conditions.
The origin of 14 hours: the first generation of nickel-cadmium batteries need to be charged at a small rate, and it is generally recommended that the charging current is 1 10C, for example, if your battery capacity is 600mAh, then 1C is 600mA, and 1 10C is 60mA. Therefore, it takes more than 10 hours to fully charge, and for nickel-cadmium batteries, small rate charging is beneficial.
2. The current battery situation of mobile phones: mainstream mobile phones are basically lithium-ion batteries, and the closest to our impression should be 3210, equipped with nickel-metal hydride batteries, and it seems that we can't find mobile phones with nickel-metal hydride batteries around us.
3. Knowledge of lithium-ion batteries: We only talk about capacity on the one hand. There are two ways to measure the capacity of a lithium-ion battery:
1C charge and discharge; Charging and discharging, no matter what charging system is used, should meet the standard. Because lithium-ion batteries are different from previous nickel-cadmium batteries, the high-rate charging of 1C is already acceptable, and it must be accepted. And if a 600mAh battery is charged at 1C, it should be fully charged in about 1 hour, and if the phone is directly charged this way (many are, 12-14 hours is nonsense.
According to the GB T18287 2000 national standard, when the constant current is charged, the constant voltage is changed, and the charging is considered to be terminated when the current drops. For example, the charging current of the charger is that if you charge a 600mAh battery, the charging current will drop to 6mAh in about 2 hours, and it is considered to be fully charged. Why did it come down?
Because it is already full, this is a reflection of the cell.
In fact, for nickel-metal hydride electricity, the national standard has also stipulated the index of high-rate charge and discharge, and I will not talk about it now.
4. What counts as "activation"? The lithium-ion battery itself is "live", if the design capacity is 600mah, although I charge it for 2 hours, I will be full, and then discharge, I can get a capacity of 600mah, and the design capacity has reached it, what is the problem of whether it is alive or not? The technical supervision department implements the national standard, and the detection capacity is charged with 1C, and then put, and the capacity reaches the qualification once out of 5 times.
So use it normally, charge it normally, and use it like this from the new battery, without worrying about "not being excited".
5. Charging for 14 hours is to deceive yourself: direct charging with a mobile phone, about 2 hours is full, and the remaining time is the time of the "baking" machine, if there is an error in the charging control of the mobile phone (there are some), then it is the time to test the battery. Charge for 14 hours with a seat charger that can't pass (there are too many on the market), and your battery will pass a catastrophe before it starts to work for you, so ruthless!
-
The upstairs was nice. I read it after a long knowledge. Thank you!
-
The first three times it is best to use photoelectric before charging, but the charging time is different. Some are long and some are short, depending on what kind of electronic product you have, there should be one on the manual.
-
Charge until hot.
Almost ten to twelve hours.
The second and third times must be depleted before charging can be resumed.
Such a battery is durable.
-
In fact, it doesn't take that long, and the current batteries have been repeatedly charged and tested before they come out, so the first charge after buying electronic products should be charged for another one to two hours after the charging is completed!
-
Uh......Otherwise, 4 to 5 hours is still fine.
CE marking – passport to the European market.
Meaning of CE marking: CE is the abbreviation of the European Union (European Communities), and the CE mark indicates to European customs that the product complies with one or more relevant European directives. >>>More
Of course it's PDA,If it's just to read an e-book,It's great to buy a second-hand PALM,I have Sony sj22 to buy it just to read a book,It's less than 500 yuan,Color screen,320*320 resolution。 The battery can last for about 15 hours. If there are no requirements for the screen, you can buy a black and white machine, the super classic PALM M500 battery can be used for more than 45 hours (second-hand about 400 yuan), the black and white machine does not tire the eyes when reading books, and the color machine is almost. >>>More
If you want to do a good job in production management, it is essential to do a good job in material management. If thousands of materials only rely on the material name, specification, etc. as the management basis, and there is no material code code that can be used as a unique identification, then the final material management is chaotic. Therefore, in order to achieve scientific and efficient material management, coding materials is the foundation. >>>More
Usually, if you use your eyes too much, it will also make your eyesight worse, such as reading and writing in a dark room or reading and writing for too long, rarely going outdoors for exercise, rarely looking at green things, and using the unequal posture of your eyes, which will also make your child's eyesight worse.
Here's what the exterior design looks like.
Brainstorm first – draw it by hand (the reason is that if you don't draw it for a while, you will forget about it.) ps,, it's all right. Pick your own one you like. 2D is fast to perform. It's easier to get results. >>>More