What flooring materials are used in the water workshop?

In order to improve the working environment of the factory workshop, achieve environmental protection, and reduce dust and ground moisture, the factory workshop floor is the construction of epoxy floor, epoxy anti-static floor, corundum wear-resistant floor, electrostatic fireproof spark-resistant floor, self-leveling cement floor, heavy anti-corrosion floor, and self-leveling hardener floor.

The factory floor paint has the advantages of high-strength, wear-resistant and beautiful flooring, and has the advantages of no joints, solid texture, good chemical resistance, anti-corrosion, dust-proof, convenient maintenance and low maintenance cost. A variety of schemes can be designed according to different application requirements, such as thin layer coating, self-leveling ground with a thickness of 1 5mm, anti-slip and wear-resistant coating, mortar coating, anti-static, anti-corrosion coating, etc. Therefore, it is widely used in workshops, computer rooms, warehouses, laboratories, wards, operating rooms, workshops, etc.

The selection of factory floor paint is very important, if the selection is improper, it is easy to scratch, easy to wear, easy to delaminate, etc., the general selection method is as follows

1. Mechanical performance requirements.

There are three main aspects:

1.Abrasion resistance: What kind of vehicles will walk on the floor when it is in use?

2.Pressure resistance: How much load will the floor withstand when used?

3.Impact resistance: Does the impact force cause the floor surface to peel off?

2. Chemical performance requirements.

There are two main aspects to consider:

1.Acid and alkali resistance: the type and concentration of corrosive chemicals when used.

2.Solvent resistance: the type of solvent and the contact time at the time of use.

Third, the location of the floor.

Depending on the location of the floor on the basement or ground floor, determine whether a moisture-proof treatment is required or a special moisture-proof floor is selected?

Fourth, the condition of the base surface.

1.Base strength: generally required compressive strength of 20MPa

2.Flatness: Does it need to be repaired with epoxy mortar?

5. Aesthetic requirements.

1.Color requirements: Do you need to color divide the area?

2.Brightness requirements: matte or glossy?

3.Flatness requirements: Is there a requirement for the flatness of the floor?

6. Spark-proof and anti-static.

There is a need for flooring in some occasions.

7 Security Requirements.

If the floor is in an oily environment or on a ramp, you need to choose a non-slip floor.

Floor paint is suitable for some places with high requirements for sanitary conditions, such as hospital floor, food factory workshop floor, pharmaceutical factory workshop floor, laboratory building floor, computer room floor, etc.; and the ground that requires anti-stamping, anti-corrosion and wear-resistant, such as underground parking lots, factory warehouses (over forklifts), etc.

Construction industry: The floor is the part of the low-rise room in contact with the lower layer of the building, which bears the ground load of the low-rise room, and must have good wear-resistant, moisture-proof, waterproof and thermal insulation performance.

Epoxy self-leveling is commonly used.

Permeable flooring is also known as ecological permeable flooring, permeable concrete, sand-free concrete, etc., using aggregate crushed stone, cement, additives, cement, water, etc. after uniform mixing, paving into a pavement.

Mask layer.

Covering agent (color can be customized): super wear-resistant, good weather resistance, acid and alkali resistance permeable concrete surface layer.

Stone (small) + cement + permeable enhancer + toner (optional) + water permeable concrete surface layer.

Stone (small) + cement + permeability enhancer + toner (optional) + water Jinyun Mountain floor to help you answer, I hope it will be useful to you!

Permeable flooring is also known as permeable concrete, which is paved into a pavement by using aggregate, gravel, permeable material, cement, water, etc. It has higher strength and durability than traditional concrete, and can meet the requirements of mechanical properties, service function and service life of the structure; It has harmony with the natural environment, reduces the load on the earth and the ecological environment, and realizes the recyclable use of non-renewable resources; It has good use function and can build a gentle, comfortable and convenient living environment for human beings.

It's good to buy a general magnetic whiteboard outside, but pay attention to the quality and don't be easily deformed.

Then buy a magnetic stripe or a round magnetic block with a rubber shell, and press the printed paper directly with a magnetic stripe or magnetic block, which is very beautiful, and the replacement is also very flexible, and there is no need for adhesive at all.

Introduction: It is the basic implementation organization of enterprise production. The workshop of an industrial enterprise generally has a moderate scale and undertakes the production and processing of an independent product or an independent component.

The workshop is in charge of the workshop director, and a number of deputy directors are set up to assist the director. Under the workshop director, there are also capable staff, such as statisticians, quality inspectors, etc.

Originally, it was called a workshop because the production site was full of large industrial equipment such as lathes and milling machines, and people worked in it.

Market value: Since 2006, China has been the world's second-largest market for new cars after the United States. By the end of 2006, for the first time, there were more than 30 million privately owned cars of all types in China. China's car ownership is less than 30 per 1,000 people, far from the world's average of 120 per 1,000 people, China's auto market has huge development potential, especially private car consumption, which will continue to grow rapidly in the next 20 years.

The growing number of people with cars is increasingly forming a unique group of people with a unique core (cars). This group of high-end consumers is visible and tangible because of the external signs of action. By framing this group in a reasonable way, and "sticking" to this group through effective channels, this potential group with ** value can be manifested.

With effective means to integrate and utilize this group of people, and superimpose related goods and services on the basis of the integration platform, it will create huge business opportunities.

Media market value analysisThe market value analysis of workshop communication should be divided into two levels: "workshop"**" and "workshop precise channels".

Slepin Peigu focuses on the sales of permeable floor materials.

1. Clean the ground completely, clean up the dust on the ground, and try not to leave dust. If you want to use water for scouring, be sure to work every other day and make sure that the ground is not waterlogged or too wet. 2. Divide the ground sand treatment agent.

Stir evenly, scrape or roll on the ground, repeat the construction twice and construct once every 2 hours Here it should be noted that the serious situation of local sand needs to be repaired, the number of brushes and the amount of brushing are determined according to the site conditions, for places where there is a serious material detachment phenomenon or rapid penetration, it must be replenished in time to ensure its penetration and infiltration. Generally, the place with high surface density has less infiltration, and the place with low surface density has more infiltration, which should be disposed of differently in construction. The gist is:

1st pass: draped, 2nd pass: roll-on, 3rd or 4th pass.

3. Maintenance: The ground sand treatment agent can be used 24 hours after the construction is completed. 4. Repair the damage to the ground Some of the unevenness caused by the damage in the early stage and the unevenness caused by peeling and shoveling treatment, or the unevenness caused by other reasons, will be treated after the construction of the above processes.

Hello, epoxy self-leveling is recommended.

Epoxy self-leveling flooring is made of solvent-free epoxy resin materials and special curing agents, adding various additives, pigments, fillers, etc., through strict proportioning and special floor paint construction technology. It not only has chemical characteristics such as water and oil resistance, acid and alkali resistance, salt spray corrosion resistance, but also has many physical characteristics such as wear resistance, pressure resistance, impact resistance, and scrubbing resistance. In addition, there are no gaps on the surface of epoxy self-leveling flooring, easy to clean and maintain, smooth and smooth, bright and beautiful, and durable.

As a kind of energy-saving and environmentally friendly epoxy flooring, epoxy self-leveling has been widely used in clean factories, dust-free, and aseptic workshops, so it is suitable for use in pharmaceutical workshops.

Pharmaceutical factory production workshop has anti-corrosion, wear-resistant, dust-proof requirements, it is recommended that you wear-resistant hardened flooring, only this kind of floor meets the requirements of the pharmaceutical factory workshop floor, many professional flooring companies are like this, first look at the construction environment and use, and then provide a plan, such as Qifeng floor is like this.

Polyurethane mortar flooring, Shanghai Kecong has 15 years of professional and technical experience, please consult Shanghai Kecong polyurethane mortar.

Performance characteristics: anti-corrosion, anti-slip, anti-mildew, anti-static, high temperature resistance, low temperature resistance, impact resistance, etc., applicable places: fast food kitchen, aviation food, hospitals, venue canteens, food processing plants, meat freezers, wineries, pharmaceutical raw material workshops, traditional Chinese medicine raw material workshops, chemical workshops, tobacco processing, nuclear power engineering, aerospace engineering, military equipment testing and manufacturing sites, etc.

After the concept of sponge city construction was proposed, the permeable floor was well received by people. Mainly because permeable flooring can reduce the amount of water on the road, quickly seep water, and have a variety of colors to choose from. So how much does permeable floor paving cost?

Permeable concrete also has the advantages of rich color, fast drainage speed, noise absorption, etc., which is an important advantage of permeable flooring. At present, the color permeable floor contractor is expected to be 70-120 yuan square meters, what are the factors affecting the construction?

Composition of materials: cement, stones, reinforcing agents, toners, protective agent strength requirements: C20, C25, C30, etc.

The thickness of construction: the thickness of the bottom layer, the thickness of the surface layer with color, such as 6+4 thickness design artificial machinery: now the labor cost is very high, and the labor cost varies greatly in various regions.

Jiajing Ecology focuses on the technology research and development and material production of permeable road systems. The company now has the construction technology of special concrete projects such as exposed aggregates, luminous stones, and planting slope protection, as well as products that are conducive to concrete such as moisturizing enhancers and overcoats that delay solidification, and new pavement pavement materials such as permeable bricks.

1.Permeable flooring has 15%-25% porosity and is capable of permeable water rates of 31-52 litres per hour, much higher than the discharge rate of the most efficient rainfall in the best drainage configuration. 2.

Sealing agent Permeable floor material, sealing agent characteristics, pattern and color arbitrary group, integral molding, one-time pavement, compressive strength can generally reach more than 3 times that of ordinary concrete, good wear resistance, use inorganic pigments. I hope it helps, I hope to adopt, thank you

Ground waterproofing materials are divided into three categories: waterproofing membranes; polyurethane waterproofing material; New polymer cementitious waterproofing material.

1) Waterproofing membrane.

The waterproofing membrane in the ground waterproofing material is mainly used for engineering construction, roof, exterior wall, etc., its waterproof object is the concrete component, and the solution is selected according to the characteristics of the concrete to solve the problem.

In the ground waterproof material, take measures that combine rigidity and softness to achieve the best waterproof effect.

2) Polyurethane waterproof material.

It is a cured synthetic polymer waterproof coating, which is halved evenly in proportion to group A and B.

After several hours, it is applied to the base surface to be applied and consolidated into a waterproof coating film with elasticity and durability.

3) New polymer cement-based waterproofing material.

The waterproof material is a two-component waterproof material composed of acrylic emulsion and additives and a powder composed of special cement, graded sand and special mineral powder in a specific proportion. The chemical reaction produced by the mixing of the two materials is coated on the surface layer to prevent waterproofing, and it can penetrate the crystals formed inside the substrate.

The subdivision of the ground waterproofing material is to be able to decide which kind of groundproofing material to use according to different waterproofing methods, from the structure of the house and the material of the building. Waterproofing is mostly used on roofs, grounds, exterior walls and indoors, and the necessity of waterproofing can not only place indoor water leakage but also ensure personal safety.

I don't know what the floor is, if it is a bathroom with JS, it is better to use polyurethane paint.

Material: 1 polyurethane waterproofing (is extracted from asphalt). Please don't buy coal coke refined, it's too toxic.

2. Add waterproofing agent to the mud and brush the leak plugging king at the floor drain.

Both methods are safe, and the second one is relatively cheap, and it is more reliable and robust. But there are conditions: the powder layer and tiles should be added with waterproofing agent.

It is generally suitable for second-hand house decoration. Method: First, buy a bucket of Dongfang Yuhong's waterproof coating, estimated at 90 yuan a barrel, and then buy a brush.

Second, clean the walls and floors of the current bathroom and kitchen to ensure that the floors and walls are dry.

Third, use a brush to brush the waterproof paint on the floor and wall, every three to five hours, and use it anyway.