My ADSL broadband cat is not broken

After plugging in the ** line, the link light keeps flashing, but the ** machine can be connected, and it can be diagnosed in two situations:

First, the wire itself is not well connected at the junction, resulting in the voice can be transmitted but the information can not be transmitted, in this case, you should check whether the interface is connected, especially the place where the manual connection of the wire can be reconnected (because the wire is also live, so the wire will be entangled together will produce sparks, making the line unstable).

Second, if one step does not work, then change to a cat, simple and worry-free.

The above are my own personal experience of using the computer, and it is by no means a simple "network copy", I hope it will help you.

How can I do it without setting it!!

This cat seems to have a routing function.,Study the manual in detail,The general steps are1、The IP address of the host is set to be consistent with the router,Of course, the easiest way is to set it to get it automatically。

2. Log in to the router, usually output the address of the router in IE, and enter the cat's settings page to set the route.

Then enter the login username and password of the router, which can be found in the manual3. Select the Internet access type in the router's settings item, whether it is PPOE (ADSL user) or cell broadband.

4. Output the account and password for surfing the Internet, and save it.

5. Find the routing option, open it and save it.

6. Restart the router.

The vast majority of routers are set up this way.

For Internet access devices, the easiest setting is to set up an automatic IP

I'll teach you the easiest way to do it.

Call**10000,0 artificial station, report your home's **number, and help you do it within a day, free of charge.

You can add an automatic real IP to your machine.

There will be several reactions:

The power --- is always on.

For the ** line signal light--- it will flash at first The signal is detecting, then it will always be on and the signal will be normal, and it will flash when there is data on the broadband connection.

Computer network cable light The computer connection is always on, and it will flash when there is data.

Connect to the Internet as normal.

Lamp. When connected to the Internet network, it always lights up and flashes when there is data. If the ADSL's light keeps flashing, it flashes very slowly, and then goes off. Keep repeating, that's the ** line problem.

Do you have to have a cat with broadband?

At present, there are two ways to access home broadband:

1. Direct network cable to the home, connect the home line directly to the computer and then dial up to access the Internet. (No need for cats) 2. Optical fiber access, optical fiber into the home requires optical fiber cats to convert signals, and then network cables to go online.

Light cats. Optical fiber modem) It is a device that converts optical fiber network signals into network signals, and the distance it converts is relatively large, so it is not only used in our homes, Internet cafes and other places where the Internet is used, but also in some large transmission network places. Now you need to use optical modems for mobile and China Unicom, but its functions are still different from routers.

The usage is also relatively simple, connect the network terminal to it, and then connect it to the router with a network cable to access the Internet.

Call 10000 directly··· They have specialized technicians to help you analyze and answer...

In the past, I encountered that sometimes there is a network, sometimes there is no network, if it really doesn't work, you fix the cat, and the restart has been all over... If it doesn't work, you can change the cat when you have time

Dial-up Internet access can be dialed up in general the cat is not bad, you can call ** ask telecommunications, he can test them that there is no problem, if they have no problem, then your side, either the cat is the router and then the network cable network card, if you have the conditions, you can try it again, if not, restart the side.

If there is a problem with the network, the signal red light on the broadband modem will keep flashing.

The determination of whether a broadband cat is normal or not is relatively simple.

1. Connect the stand-alone machine to the network cable out of the optical modem for dial-up Internet access, if you can't get on the network (the computer is normal), you can determine the operator's network failure. Although it may not be judged to be a fault of the optical modem at this time, the stand-alone test cannot be connected to the Internet and can only be reported to the operator's maintenance personnel for maintenance.

2. If there is a sys light in the modem state, this light should be always on normally, if it is flashing or not lit, it is judged to be a hardware or system problem of the modem.

3. The light port indicator light of the optical modem, if the red light LOS light is on, it means that there is no light. If the maintenance staff checks that the optical fiber of the user's home is receiving light normally after the fault is reported, the modem is judged to be partially faulty and must be replaced.

1. If the user buys the fiber optic cat by himself, he needs to call the manufacturer to consult the maintenance method.

2. If it is less than one year, you can directly call the router manual for maintenance**, or you can directly repair it at the maintenance station designated by the router.

3. If it is a problem with optical fiber, please call Telecom, Unicom, and Mobile Maintenance**, and the maintenance master will come over to debug and confirm whether there is a problem with the optical fiber modem.

Dear Telecom users, Hello! You can go to the local telecom business hall to buy a new cat, if you don't know how to install, you can find an installer to install it for you. It is also possible to report for repair, and the staff will come to replace the new cat for you.

If you need to check the bill and pay the phone bill, please log in to the online business hall of Anhui Telecom. Have a great day!

Hello: If it is a cat sent by Telecom, you can call ** for repair, and Telecom will replace it for free.

Just buy a new one! You don't need to fix it, but you can also call the telecom ** Just say the network problem, let them come to help you fix it, and wait until the inspection is finished, he will say that the cat is broken, then you can directly ask him to change it for you, by the way, help you set it up!

Hello! Whether the telecom company will replace it depends on the agreement at the time of the application, you can call the telecom customer service 10000 for consultation! I hope my answer will be helpful to you, and you can log in to Hubei 10000 for more questions!

Now telecom doesn't replace cats for free, it's only a few dozen dollars to buy one yourself, so buy one yourself.