Is the plasma nozzle P100P80 universal? Isn t it the same size

The plasma mouth it P100 and P80 It is universal, because for them the interface is actually the same, but they are different, so it can be universal, and P100 and P80, they are not particularly different.

Is this model of the plasma nozzle universal, is it the same size, I think it is universal, it is almost large, and the difference should not be too big, as long as it can be used.

Such devices of plasma should be universal, since they are all the same in size and function.

Regarding the question you asked about whether the P100T80 is not universal, it should be said that you should not make such an attempt, and use the relevant accessories of which product for which product.

This. The faucet is not universal, it is also available in large and small sizes in case you need it.

A: As long as it is the same specification, it can be used universally.

In the case of this pool of plasma, under normal circumstances, it can be universal, so in general, as long as one universal one is used.

Is the plasma nozzle P100P80 universal? Isn't it the same size

The plasma awl P100P80 is not universal, they are cut with iron plates of different thicknesses.

Plasma nozzle, mouth this bottle doesn't know 100, this bottle doesn't know 80 general? Isn't it the same sizeYou can find a professional to show you, it's different, I don't understand.

This situation is completely universal, because their power and intensity are the same, so the size in this case is exactly the same.

They are not universal, their models are not the same.

The reward is only 100 batches, is it universal? Isn't it the same sizeI think the plasma nozzle batch of 100 boxes wholesale store is different for different applications because their models are not the same.

Not the same.

Some cars are bigger on the left than on the right.

That's how my own car is. The one on the left can be plugged into a cigarette lighter to light the fire. The one on the right can't be put in.

The owner is good, and the interfaces of the car cigarette lighters currently sold on the market are all of the same size.

This is a rectifier bridge, which can be replaced with a large power instead of a small one, (pay attention to the withstand voltage value).

Fairing Bridge! You can use the big change, as long as you can fit it!

This one is different.

The memory slot is called DIMM slot, divided into many models, the frequency is not the same, some memory pins are different, the card head is not the same, some are 2, some are in the middle of the motherboard and memory matching, SD-RAM and DDR3 RAM can not be plugged into the motherboard at the same time, it is best to choose the same size, the same brand, the same frequency of the strip installation, if it is not the same, the system will identify the lowest frequency of the strip to run.

Therefore, when buying a memory module, you should first check what kind of memory module the motherboard supports, as long as you check the motherboard model on the Internet to know what type of memory is supported, the same model of memory no matter what brand is the same interface, and from the past to the present memory has the following types:

1. EDO memory, 72-line memory, must be used at the same time, generally used on 486 or earlier machines. It's antique, extremely hard to find.

2. SD memory, 168 lines, suitable for Pentium one to three generations of machines.

3. DDR, 184 line, suitable for the fourth generation of Pentium machines, note that this generation also has a kind of RDR memory.

The above belong to the obsolete accessories, but it is very simple to distinguish, as can be seen from the number and length of the notch of the gold finger of the memory.

4. DDR 2 3 is currently the mainstream use on the market, suitable for dual-core processors or notebook Centrino II generation machines. The form factor is somewhat similar to the DDR.

The different memory slots refer to the slots used to insert memory modules on the motherboard, and the memory module card slots have 30pin ports and 72pin ports.

Within 300 is enough! It is recommended to take a look at what type of bus memory module your motherboard supports! Then buy the same one!

You can use CPU-Z to check the type of memory you have and the bus frequencies supported! It has to be the same! Other than that!

If you want to buy a 2G RAM! It's best to buy two plugged into two DDR channels!

This is related to the support of the motherboard, the strip of DDR is not compatible with DDR2, and the strip of DDR2 is not compatible with DDR3

The memory slots of different generations are different, DDR is 184 pins, DDR2 is 240 pins, DDR3 is also 240 pins, but the voltage is not the same as DDR2 voltage.

Specifically use DDR for several generations of memory to see what your motherboard supports.

Just tell your boss about the motherboard model and let him get it for you.

No, the number of pins is different.

If your CPU is a BGA directly soldered on the motherboard, you don't have to change the PGA, you can change it, and it is estimated that you can change the mobile CPU of the Danube platform, Athlon 2nd generation dual-core or Phenom

Specifically, you need to see the interface.

You can't be sure of u's fault.

Take it to the after-sales inspection, ask them to find the problem, and then consider replacing the corresponding parts.

Notebooks and desktop CPUs are definitely different, if you want to buy a CPU, you can buy a lot of computer cities in Guangzhou, and it's cheaper to buy one if you can't find it.

That, isn't it soldered on the motherboard, so you, landlord, are you soldering yourself?

All routers are the same, but the router settings interface of each brand is different, and the content is the same. This depends on your personal usage habits, just buy the original brand if you are used to the original interface, don't need to be exactly the same, and now the better brand recommends tp-link.

Broadband routers are universal, but they need to be initialized and configured when they are bought, such as configuring PPPoE and DHCP.

Now tp-link d-link, it's not bad. Universal.

Cup sleeves are just for protection; The cup sleeve of the hot drink cup can play a good role in heat insulation;

The specifications of the cups are not the same, and the cup sleeves are naturally not the same size (7a, 8a, 9a, euro 12a, euro 15a, etc.), the cup sleeve and the cup body must be consistent and the same specification;

The biggest difference between hot drinks and cold drink cups is that the coating degree inside the cup body is not the same, and the current paper cups are coated, not wax

Paper cups do not have transparent cups, and transparent cups are all plastic cups.