Can I put a refrigerator that has been used for more than ten years in transportation?

No, no. If you want to store it for a long time, you must use it vertically, at least not at a tilt angle of more than 45°, otherwise the refrigerator is easily damaged.

It can be put in transportation, but because your refrigerator has been used for a long time, if it is used horizontally when transporting, you need to put it back when you must stand it up for him, and then turn on the power after a few hours.

This refrigerator has been used for more than 10 years, and it is best not to put it down for transportation.

Years of use have developed a certain amount of wear and tear, and putting it down for transportation may damage the parts of the refrigerator.

Can a refrigerator that has been used for more than ten years be put down for transportation, and the answer is definitely yes, as long as the refrigerator is not subject to bumps, there is not much of a problem.

If you have used the refrigerator for ten years, it is okay to put it in transportation, but if you use it, this thing will definitely not be easy to use, because it may be damaged if it is pressed.

If you have used the refrigerator for ten years, you can put it in the refrigerator for transportation, but you must pack it well, so that it is not easy to break.

The refrigerator should be placed vertically during transportation, if it is put down, it is likely that some of the original parts of the refrigerator will be damaged, affecting some functions of the refrigerator and not being able to use normally.

It's been ten years since I had a rock under the ice, and if I have a refrigerator, it's definitely not very easy to use, the best thing is not to move, if you move the fish again, maybe the compressor will be damaged, see if there are any other problems?

It is best not to put the refrigerator down for transportation, it will damage the service life of the refrigerator.

Hello friends, do not put down the refrigerator for transportation, and the refrigerator refrigerator is transported or carried upright.

It is best not to put the refrigerator down for transportation, because the original contents of the refrigerator are easily damaged if you put it down.

How long does it take for the refrigerator to be powered on after it is put down for transportation.

2-4 hours. After transportation, the refrigerator needs to be put on for at least 2-4 hours before it can be powered on, in order to protect the life of the compressor, because the compressor is moved due to the shaking of the refrigerant in the cooling pipe, it must wait for the impurities in the chiller to precipitate before it can be operated, otherwise when the compressor sends out the refrigerant, it will block the high and low pressure valves, resulting in a decrease in the refrigeration effect. Put something in the refrigerator after half an hour of power-on, which is good for maintenance.

During transportation, try to prevent bumps or violent vibrations to prevent damage to the welded parts of the compressor and pipelines, resulting in refrigerant leakage.

A refrigerator is a kind of refrigeration equipment that maintains a constant low temperature, and it is also a civilian product that keeps food or other items in a constant low temperature and cold state. There is a compressor and an ice machine in the box.

Cabinets or bins for freezing, storage bins with refrigeration units.

How does the refrigerator work:

low temperature and low pressure) refrigerant.

Gas) Compressor (liquefied) Liquid refrigerant (high temperature and high pressure) Radiator (heat is released from the surface of the refrigerator) Liquid refrigerant (low temperature and high pressure) Capillary Evaporator in the refrigerator.

The copper tube around the inner wall of the box) gasification, that is, endothermy, the temperature in the refrigerator will drop (gasification), and the refrigerant (low temperature and low pressure) compressor.

In this way, the heat in the box is moved out at the price of refrigerant from the recirculation.

When transporting, the maximum inclination angle of the box.

It can't exceed 45 degrees, and it can't be upside down or horizontally, because there is refrigeration oil in the compressor, and if the oil is reversed, it will enter the refrigeration pipe, which will cause blockage to the pipeline and reduce the refrigeration effect.

The refrigerator cannot be transported backwards. The inclination of the refrigerator during handling shall not be greater than 45 degrees, because in order to reduce noise and buffering, the entire motor of the refrigerator compressor is hung on the casing by spring, if the inclination is excessive, the spring hook will fall off, resulting in damage to the compressor, so it is recommended not to put it upside down. The refrigerator can't be transported; If it is transported down, it will cause the compressor of the refrigerator to malfunction; To reduce noise and cushioning, the entire motor of the refrigerator is suspended from the housing by springs.

If the tilt is excessive, the spring hook will fall off and the compressor will be damaged.

Precautions for refrigerator transportation:

1.Before moving the refrigerator freezer, unplug it, cut off the power supply, remove all the food in the refrigerator, fix the moving parts such as the refrigerator shelf, humidor and freezer drawer with tape, close the refrigerator freezer door, and secure it with tape to prevent it from being opened when moving.

2.During transportation, it is necessary to prevent bumps and violent vibrations, and to prevent rain and flooding.

3.When carrying, you should lift your feet, and you can't grab the door handle or exert force on the countertop and condenser, let alone drag on the ground.

4.After transportation: It needs to be corrected for at least 2-3 hours before it can be energized to protect the life of the compressor, because the compressor is moved due to the shaking of the refrigerant in the cooling pipe, it must wait for the impurities in the refrigerant to precipitate before it can operate, otherwise when the compressor sends out the refrigerant, it will block the high and low pressure valves, resulting in a decrease in the refrigeration effect.

Generally, it is enough to stand still for more than 2 hours.

In the process of handling, the refrigerant substance in the refrigerator will experience bumps, and it will be rushed to power on after being transported home, which will affect the service life of the refrigerator, and it can be stationary for more than 2 hours, of course, if you are not in a hurry to use it, you can stand more.

Then check the voltage and wiring of the refrigerator to ensure the rated voltage of the refrigerator and confirm the voltage used in the room code, and do a good job of grounding the refrigerator to prevent the risk of electric shock; When you start using it, you can't put too many items, which is easy to affect the run-in period of the new refrigerator and affect the life of the refrigerator.

Tips for using the new refrigerator: After the power is turned on, the refrigerator door cannot be opened and closed frequently, and it is necessary to wait for the refrigerator to be refrigerated and stabilized before opening the door or adding items, and the refrigerator can not store too many items during the run-in period to prevent the refrigerator from running under load.

It is more appropriate to stand for two hours before powering on the test.

Common sense of refrigerator use:

1. After the new refrigerator is purchased, it should be wiped several times with a clean rag, but do not close the door after wiping it clean, you should open the door to let the odor inside be clear, or you can use an electric fan to blow it inside to speed up the emission of odor, and then use electricity.

2. After the new refrigerator is carried back, it should be allowed to stand for 2 hours before powering on the test.

3. The refrigerator should be placed in a cool and ventilated position, and a certain amount of space should be left around it to facilitate the ventilation and heat dissipation of the refrigerator and improve its refrigeration efficiency.

4. When powering on the machine, you should read the manual first, and set the adjustment problem according to the operation method of the manual, because the adjustment method of each brand and each model is different. Set the temperature of the freezer to minus 18 degrees Celsius, and the refrigerator to about 5 degrees Celsius. If there is no food in the freezer that needs to be frozen for a long time, the temperature can be appropriately increased, so that it is more energy-saving.

The same goes for the refrigerator, if there is no special food request, you can turn the problem up to between 8-12 degrees, so that it is more energy-efficient, especially in summer, when the power saving is particularly obvious. However, if there is yogurt in the refrigerator, the temperature should be between 2-6 degrees. The mechanical thermostat should adjust the size of the digital gear according to the ambient temperature of the season, adjust the smaller digital gear in summer, adjust the middle gear in spring and autumn, and adjust it in the larger digital gear in winter.

The smaller the gear adjustment, the more power saving.

5. When the machine is powered on, do not put in the food first, wait for the temperature in the refrigerator to drop and stabilize, and then slowly put in the food after the compressor starts and stops normally, and do not put too much food at one time to avoid overload of the compressor.

6. The food placed in the refrigerator should be sealed and wrapped in a container or food bag to avoid odor caused by mutual odor.

7. If the refrigerator is a direct cooling refrigerator, when the frost thickness in the freezer exceeds 6 mm, it is necessary to carry out manual defrosting in time to avoid reducing the refrigeration efficiency.

The refrigerator is put down and transported, and it can still be used.

After transporting, the refrigerator needs to be placed in the right position for at least 2 to 3 hours before it can be powered on, so as to avoid the compressor oil from entering the pipeline, which will be attached to the wall of the refrigerator pipe and will insulate the cold, resulting in a decrease in the refrigeration effect.

Precautions for refrigerator maintenance:

1. We need to clean the refrigerator regularly, at least twice a year. When cleaning the refrigerator, first cut off the power supply, then use a soft cloth dipped in water or some dish soap, gently rub it, and then soak it in clean water to clean it.

2. In order to avoid damaging the outer lining of the shell and some plastic parts of the shell, you can not directly use some detergents, detergents and some talcum powder, alkaline detergents, thinners and oils.

3. When some accessories in the box are dirty, we should first take them out directly and clean them with some water or detergent, especially the surface layer of some electrical parts can not be scrubbed with water, and some dry cloth can be used to wipe off the dust.

4. When the refrigerator is cleaned, we must plug in the power supply firmly, and then check whether the thermostat of the refrigerator is in the correct position.

5. If the refrigerator has not been used for a long time, it is necessary to unplug the power cord, clean the outside of the refrigerator, and close the refrigerator door only after drying.

No. When handling the refrigerator, it should be noted that the tilt of the fuselage should not exceed 45 degrees, and the vertical state of the box should be maintained, and it should not be upside down and horizontally, nor should it be grabbed by the doorknob or dragged the condenser to avoid damage. If the refrigerator is placed upside down, it will cause the shock absorbing spring in the compressor to decouple, and the refrigerator will not operate normally.