What is 3M 2665 glue and the introduction of 3M4229P tape

Moisture-cured polyurethanes are heated using similar to hot-melt adhesives, but with a longer open time that makes it easier to install parts that require a thinner bond layer.

Applicable occasions: It is suitable for bonding lenses, small joints for cabinet assembly, etc.

Among them, the ultra-thin, tough, and flexible adhesive line helps improve compatibility, appearance, and reliability.

It has extremely high adhesion strength to different substrates such as plastics and metals, and even to materials such as polycarbonate, which are difficult to bond.

The appearance has been improved, eliminating the whitening of cyanoacrylate adhesives and the cracking of ultrasonic welding.

2. Features and benefits: shorten the overall assembly time, improve efficiency, productivity and yield.

The high viscosity joins the components together for immediate processing and fast production.

The 4-minute open time allows for an initial reset and makes the bond line thinner, avoiding curing too quickly in assembly.

The low viscosity will keep the glue shape and size in a fixed area.

Single-group dispensing eliminates potential inconsistencies in metering and mixing.

100 solids provides a low VOC system with no drying equipment and no impact on plastics.

Bonding and sealing are done at the same time.

There's nothing you can do about it.

Summary. Hello, 3M glue 467 ingredient information, the ingredient information is made by direct coating of propionic acid glue. 3M467 is a non-substrate double-sided tape in 3M double-sided tape, which is made of propionic acid glue directly coated, and the color of the tape is transparent, which belongs to the 3M200MP series adhesive system, and the specifications are:

1219mm*55m*, thin thickness, still has excellent adhesive effect, can prevent falling off and excellent waterproof performance, good processability, good temperature resistance, good adhesion; The release liner is a polymer-coated waterproof kraft paper, which will not wrinkle in a high humidity environment; Good temperature resistance, long-term temperature resistance 149, short-term temperature resistance up to 204; The bond strength increases with the increase in the contact area between the adhesive and the surface to be adhered to, and the application of stable pressure helps the adhesive to contact with the surface to be adhered to, thereby increasing the bond strength. To achieve the best bonding effect, the bonding surface must be clean and dry, the optimal temperature range for tape application is 21-38, it is recommended that if the initial bonding temperature is lower than 10, it is not suitable for bonding, so the adhesive is too hard to be firmly bonded to the object; However, if it has been bonded, the adhesion at low temperatures is also satisfactory.

Hello, 3M glue 467 ingredient information, the ingredient information is made by direct coating of propionic acid glue. 3M467 is a non-substrate double-sided tape in 3M double-sided tape, made of acetic acid glue directly coated, the color of the tape is transparent, it belongs to the 3M200MP series of Jianju Column Adhesive System, the specification is: 1219mm*55m*, the thickness is thinner, it still has excellent adhesive effect, can prevent falling off and excellent waterproof performance, good processability, good temperature resistance, and good adhesion; The release liner is a polymer-coated waterproof kraft paper, which will not wrinkle in a high humidity environment; Good temperature resistance, long-term temperature resistance 149, short-term temperature resistance up to 204; The bond strength increases with the increase in the contact area between the adhesive and the surface to be adhered to, and the application of stable pressure helps the adhesive to contact with the surface to be adhered to, thereby increasing the bond strength.

To achieve the best bonding effect, the bonding surface must be clean and dry, the best temperature range for tape application is 21-38, it is recommended that if the initial bonding temperature is lower than 10, it is not suitable for bonding, so the adhesive is too hard to bond firmly on the object; However, if it has been bonded, the adhesion at low temperatures is also satisfactory.

Why does 467 not stick to 3m without its material? How do you store it?

I've now made a batch of these non-sticks.

To be placed in a sealed dry environment.

I'm all protected with a sealed bag.

Is there any way to solve this problem?

It can be expired, you check it.

Can you cut some small holes in the silicone cage cloth, so that the water vapor can flow away without affecting the effect of the cage cloth.

3M 4229P Foam Tape is the best of today's industrial-grade double-sided foam tapes, with an abrasion-resistant backing, adhesive coating for a variety of surfaces and a unique pigment coloring technology that meets the requirements of smooth parts of the body, all automotive signage, door-window bonding and sealing, and is suitable for non-structural fixation of small and light materials.

1. Adhesion, strong adhesion, instant adhesion.

2. The tape is buried in paper and is the base material, which is easy to tear off from the tape roll without stretching, which is convenient for construction and operation.

3. High temperature resistance, after the construction operation is completed, tear off the tape, there will be no residual glue (no adhesive will be left).

4. Excellent solvent resistance and chemical resistance, which can effectively prevent the penetration of solvent liquid.

5. Strong retraction. During operation and construction, there will be no retraction or buried stretching. The accuracy of the line which can cover the periphery strictly.