I don t know if it s a computer problem or a browser problem, please take a look at which expert

Plan 1 [New P].

Note [Original]:

1 In safe mode, the effect is even better!

2.All the software to be used below should be installed or upgraded to the latest version to ensure the effectiveness of use.

3.It is not antivirus, and the following methods can be used directly. If it doesn't work, use a high-quality antivirus (e.g. Kaspersky) in safe mode to kill it, and it's best to use 360 Security Guard as well.

Use 360 Security Guard's "Trojan Horse" - Full Scan". Kill and restart. ）

You don't have to use all of the following methods, you can try them one by one. Sometimes, just the first one works.

One. Close the browser, open the "System Repair" of the new version of 360 Security Guard, and select "Home Repair", "System Repair" and "IE Repair" as a tick (you can also select all.) At least select "System Repair"), and then click "One-click Repair".

Too lazy to install it, just use the 360 first aid kit) .

Then use the 360 first aid kit. [Follow the steps: "Start First Aid" first; After scanning, if a Trojan horse appears, click "Isolation"; Then click "Repair" (you can select all of them to Fix Now".

Next, click on "Recover Lost DLL Files", add the missing DLL files that the system detected during detection, and then click "Repair Now". Repair Network is a case-by-case decision to fix or not. When you're done, you should restart.

Two. Scan with 360 Security Guard's "Clean Plugins" to clean up malicious plugins. When you're done, you should restart.

Three. Use Windows Cleanup Assistant (from the web**). After scanning (if you sweep things out, check them all and clean them), then use Fault Repair (select all), and then right-click on the desktop to refresh. Works well in safe mode.

You can also consider using the Kingsoft First Aid Kit [After point scanning, if there are items that can be repaired, after selecting all, point repair can be done. 】

Emphasis ---1In the repair, when there is a prompt in Kill Soft or 360, please click Allow. Restart the computer if prompted to restart during operation.

2.When the effect is not good, look at the three points in "Attention". 3.

After that, if the effect is not good, you can also consider system restoration (choose a restore point).

Simply use 360 antivirus and he will help you optimize the good software.

1. Uninstall the rogue software 360 and its whole family bucket.

2. Install and use velvet security software to help you detect and kill 360 residual viruses.

3. Use Chrome instead of other browsers to browse the web.

This is a reader issue, you can just change the viewer.

You may have fallen for malicious plugins, which are mainly designed to earn click-through rates, and generally run automatically at boot and automatically open the browser, and some even run in the background.

If this happens on your computer, you can try the following methods to solve it:

2. There is also a router, dns is caused by an attack, after practice Kingsoft Antivirus, Rising and other anti-virus software has a role, you can try, this is the notice of Kingsoft Antivirus, in addition, it is also recommended to change the default username and password of the router.

3. If it doesn't work, it is recommended to restore the system or reinstall it.

You may have installed a software that does not support each other.

360 and mouth problems, use Sogou browser to put it, uninstall him 365, recommended. Personally, I feel that 365 is a bit stuck, just install a good antivirus software. opera, this browser, too...

1. There are too many programs open, if there are too many documents or too many programs running at the same time, and there is not enough memory to run other programs, you should close the programs and windows that you don't use at any time.

2. There are too many programs that run automatically, close some startup programs, start-run-msconfig---start, in addition to anti-virus software, input methods, general programs can be turned off.

3. The physical memory is too small, and the physical memory is increased; The memory and motherboard are not plugged in properly or other hardware is not compatible, reinsert the memory or change the socket; Dual memory is not compatible, you need to use the same brand of memory or only one memory; Inferior memory module or memory module is broken Replace the memory module; Set up virtual memory appropriately.

4. Excessive fluctuation of mains voltage, or the use of inferior power supply on the PC, will bring damage to the memory, and replace the power supply with high power and high quality.

5. The PC chassis is full of dust, or the PC working environment is relatively humid, which will also cause abnormal operation. Dust removal in time.

6. CPU and graphics card heat dissipation problems, improve heat dissipation.

7. If there is a problem with the hard disk, scan to repair or replace the hard disk.

8. Driver problem: Reinstall and update the driver.

9. Illegal operation, the system cannot be executed.

10. Software damage and reinstallation of software; The software has bugs, patch or update to the latest version; The software is incompatible with the system: patch the software or try the compatibility mode of the system; There is a conflict between the software and the software If you have recently installed something new, try uninstalling it.

11. There is a problem with the system itself Sometimes the operating system itself will have bugs, so it is best to install the official update program in time and reinstall the system if necessary.

12. Virus problem anti-virus; Antivirus software conflicts with the system or software Since the antivirus software enters the underlying monitoring system, it may conflict with some software, so try uninstalling it.

13. Run and execute regedit to enter the registry, and under the entry: hkey local machine software Microsoft Windows CurrentVersion Explorer Shellexecutehooks, there should be only one normal key value below this key value"If there are others, we can delete all the others, leaving only this default key.

14. Trial command exclusion.

Start Run Enter cmd -- Enter, and enter the following command in the command prompt.

for %1 in (%windir%\system32\*.dll) do /s %1

If you are afraid of typing the wrong one, you can copy this command, then right-click the mouse button after the command prompt, hit "paste", press enter, and wait patiently until the screen scrolling stops.

In the above situation, please try the following operations:

Method 1: If you are using the Win XP SP2 operating system, make sure that the pop-up blocker is enabled in your browser. If it is already enabled, please open your browser and select "Tools" - "Pop-up Blocker" - Turn off "Pop-up Blocker" to turn off this feature.

Note: Some other browsers also have this function, please close it before using it).

If you've turned off this blocker and it's still unusable, do the following:

1) Open IE browser, select "Tools" menu - >Internet Options" - Advanced tab - > click "Reset Default Settings", click "OK" and close all Internet Explorer windows;

2) Open IE browser, select the "Tools" menu - >Internet Options" - General tab - > "Check for newer versions of saved web pages" in the Internet Temporary File Settings and select "Check every time you visit this page". And click "Delete Files" in the Internet Temporary File Settings, tick the box before "Delete All Offline Content" and click OK to close the dialog box and close all IE windows;

3) Open IE browser, select the "Tools" menu - >Internet Options" - Security" tab, select "Internet" in the "Please develop security settings for web content in different areas (Z)" window, then select "Custom level", set "**Signed ActiveX Controls", "Run ActiveX Controls" and so on in "ActiveX Controls and Plugins" to "Enable" or "Prompt", click OK, Please restart your computer;

4) If you have installed software such as 3721 Internet Assistant, please uninstall it completely;

5) If it still does not work normally, it is recommended to reinstall the IE browser or above version, and use the update function of the Windows system to install the patch.

You may have installed a piece of software that doesn't support each other.