Q6600 temperature problem, master in!

AMD Processors:

AMD Althon, Althon Opteron, Duron and Sepron series.

AMD Athlon, XP 90 degrees.

AMD Athlon, XP T-Bred Upto 2100+, 90 degrees.

AMD Atlanton XP T-Bred over 2100+ 85 degrees.

AMD Athlon, XP, Barton, 85 degrees.

AMD Athlon: 64 70 degrees.

AMD ATHLON 64 (socket 939, volts) 65 degrees.

AMD Athlon: 64 FX 70 degrees.

AMD Athlon, 64 x2, 71 degrees.

AMD Sempron (T-Bred Barton core) 90 degrees.

AMD Sempron (Paris Core) 70 degrees.

Intel Processors:

Intel Pentium 4: 64 - 78 degrees.

Note: P4 will automatically downclock when it overheats, there is no definite indicator, and theoretically it will never overheat.

Intel Pentium D (dual-core).

Intel Pentium D 820 (63 degrees.)

Intel Pentium D 830 & 840 ( degrees.

A few of the author's own computers:

Intel Core 2 Duo E4300 with a temperature between 30-50 degrees, depending on the number of tasks you are running.

Intel Core 2 Duo T8100 with temperatures between 40-60 degrees, depending on the number of tasks you are running.

Q6600 just on the original fan The temperature is generally between 50-60, and it is not much better to change what heat dissipation, and then I changed to a large chassis and installed a 25W motor for heat dissipation, now I am better than it, if you can, it is recommended to do a water cooling.

The temperature rise is normal and auspicious. But I want to be super good. Must look at the motherboard.

In fact, to be honest, the Q6600 does not have a high-end dual-core cool. Overclocking. Personally, I feel that the e8200 is better than him.

Take a look at your motherboard greenhouse lateness. If the temperature of the North Bridge Paibo is relatively high. Add north bridge heat dissipation.

The CPU temperature should be correspondingly lower.

Let's get a good fan.

Your case is not very good at cooling, and a slightly better fan of this platform will do, such as TT Mars.

Is there no heat dissipation paste?

You take the machine apart to see if the air outlet of the fan is blocked, and quickly clean the dust.

Tell you! Because your computer doesn't support Potato @! Wowhaha!

Potato tray, has there been a lack of traffic lately?

It's just a little bit, the main thing is that the bus is different, Q6600=, bus 1066, cache 8mq8200=, bus 1333, cache 4m.

The CPU cache of the Internet is important, and the performance will be better.

It is recommended to buy Q9550 360 yuan, this is a 12M large cache, and you can also buy the same specifications of Zhiqiang X3360 320 yuan.

If the sequins of the heat dissipation limbs are not hot, it should be that the thermal conductive silicone is not good or that there is a problem with the js selling your laughing loss CPU, the temperature of 70 degrees is already very high, and the standby should not touch the hunger god should reach 50 degrees. Go to the market to buy good thermal conductive silicone, or go directly to JS.

Or change the radiator.

This has something to do with the power supply.

The desktop is a bit high, and the notebook Sun Qijue reluctantly accepts it. But you're only 25% and it's 70, and the fan is fine, but the power supply is still not enough. (my notebook plays speeder 11 CPU basic 75 degrees state.) )

Q6600 is good. 4 cores to the load 25% single thread will not put 4 cores shouldn't ah, you touch the side to see that it's not very hot, if it's very hot, then there is a problem.

Core 2's shouldn't exceed 45 degrees, the voltage is a bit high, adjust to the following and give it a try.

Under normal conditions, this quad heat pipe radiator has a standby temperature, and now in this climate, the temperature is within 40 degrees. Usually 30 degrees. The temperature is within 60 degrees under the game.

You now show that the temperature is very different from the theory, you look at it like this:

Hand touch the aluminum fins of the radiator to actually feel the temperature.

If the fin temperature is low and the CPU shows a high temperature, try reassembling the heatsink, the contact surface between the heatsink and the CPU needs to be coated with a thin layer of silicone grease, which does not need to be particularly thick.

If the aluminum heatsink and the CPU case are in good contact, and silicone grease is applied, the aluminum fin temperature is low, the display is still high, and the temperature is within 65 degrees under the game, you don't care about him, it may be that there is a problem with the detection diode, or there is a bug in the motherboard BIOS.